Effect of excimer laser irradiation on crystallinity and chemical bonding of biodegradable polymer

The biodegradable polymer such as poly(L-lactic acid) (PLLA) is promising in drug delivery applications because its chemical structure allows it to hydrolyze into non-toxic substances in the human body. In such applications, drugs are embedded in a polymer matrix and released at the rate at which it degrades. PLLA degradation rate is a strong function of its crystallinity. Thus, control over crystallinity allows for continuous modification of drug release profiles. The excimer laser is used in this study to induce surface crystallinity changes because its spatially uniform intensity profile is favorable for surface treatment. The effects of excimer laser irradiation on the surface morphology, crystallinity, and chemical modifications are investigated via optical microscopy, wide-angle X-ray diffraction, and X-ray photoelectron spectroscopy. A model is developed to numerically examine the spatial and temporal temperature profiles, as well as the amount of chemical modifications. It is found that PLLA crystallinity decreases as a function of laser fluence, and that the amount of chemical modifications is minimized by annealing before laser treatment and reducing laser fluences, which decrease free radical mobility and thus the dissociation quantum yield. A working window is demonstrated in which PLLA crystallinity decreases with no measurable chemical modifications, and the working window can be enlarged by decreasing free radical mobility.

[1]  J M Brady,et al.  Degradation rates of oral resorbable implants (polylactates and polyglycolates): rate modification with changes in PLA/PGA copolymer ratios. , 1977, Journal of biomedical materials research.

[2]  D. Briggs,et al.  High resolution XPS of organic polymers , 1992 .

[3]  J. Hoffman,et al.  Melting Process and the Equilibrium Melting Temperature of Polychlorotrifluoroethylene , 1962, Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry.

[4]  R. Srinivasan.  Pulsed ultraviolet laser interactions with organic polymers—Dependence of mechanism upon laser power , 1994 .

[5]  Hideto Tsuji,et al.  Autocatalytic hydrolysis of amorphous-made polylactides: effects of l-lactide content, tacticity, and enantiomeric polymer blending , 2002 .

[6]  Y. Candau,et al.  Handbook of multiphase polymer systems , 2011 .

[7]  D. S. Dunn,et al.  Chemical and physical properties of laser-modified polymers , 1990 .

[8]  M. L. Lorenzo.  Crystallization behavior of poly(l-lactic acid) , 2005 .

[9]  Nikita M. Bityurin,et al.  Models for Laser Ablation of Polymers , 2003 .

[10]  T. Takata,et al.  Polymer surface modification due to excimer laser radiation—Chemical and physical changes in the surface structure of poly(ethylene terephthalate) , 1993 .

[11]  J. Guillet,et al.  Photochemistry of Ketone Polymers. X. Chain Scission Reaction in the Solid State , 1973 .

[12]  Shan-Ting Hsu,et al.  Effect of Film Formation Method and Annealing on Crystallinity of Poly(L-Lactic Acid) Films , 2011 .

[13]  Yoshito Ikada,et al.  Properties and morphologies of poly(l-lactide): 1. Annealing condition effects on properties and morphologies of poly(l-lactide) , 1995 .

[14]  Sylvain Lazare,et al.  Surface amorphization of Mylar(R) films with the excimer laser radiation above and below ablation threshold: Ellipsometric measurements , 1993 .

[15]  N. Inagaki,et al.  Surface modification and degradation of poly(lactic acid) films by Ar-plasma , 2002 .

[16]  Yoshito Ikada,et al.  Properties and morphology of poly(L‐lactide). II. Hydrolysis in alkaline solution , 1998 .

[17]  Yue Zhao,et al.  Formation and degradation of poly(D,L-lactide) nanoparticles and their potential application as controllable releasing devices. , 2004, Macromolecular bioscience.

[18]  Shigemitsu Okabe,et al.  Search for Adequate Biodegradable Polymer as an Eco-friendly Electrical Insulating Material , 2007 .

[19]  P. J. Butiagin.  The decay of free radicals in polymer media , 1972 .

[20]  L. Alexander,et al.  X-ray diffraction methods in polymer science , 1969 .

[21]  Sylvain Lazare,et al.  Ultraviolet Laser Photoablation of Polymers: A Review and Recent Results , 1989 .

[22]  H. Mitomo.  Correspondence of lamellar thickness to melting point of nylon-6,6 single crystal , 1988 .

[23]  Y. Yao,et al.  Effect of Laser Surface Modification on the Crystallinity of Poly(L-Lactic Acid) , 2009 .

[24]  A. Metters,et al.  Degradation of poly(L‐lactide) films under ultraviolet‐induced photografting and sterilization conditions , 2007 .

[25]  Takashi Yamamoto.  Molecular Dynamics of Reversible and Irreversible Melting in Chain-Folded Crystals of Short Polyethylene-like Polymer , 2010 .

[26]  S. Christoulakis,et al.  Bubble creation and collapse during excimer laser ablation of weak absorbing polymers , 2008 .

[27]  A. Schindler,et al.  Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions , 1979 .

[28]  M. Oujja,et al.  Effect of molecular weight on the morphological modifications induced by UV laser ablation of doped polymers. , 2006, The journal of physical chemistry. B.

[29]  K. Reichert,et al.  Thermal degradation of poly-L-lactide-studies on kinetics, modelling and melt stabilisation , 1997 .

[30]  D. Turnbull,et al.  Kinetics of Crystal Nucleation in Polyethylene , 1962 .

[31]  S. Schneider,et al.  The photodegradation of poly(2,6-dimethyl-1,4-phenylene oxide)—a flash photolysis study of polymer and model compounds , 1998 .

[32]  R. P. John,et al.  An overview of the recent developments in polylactide (PLA) research. , 2010, Bioresource technology.

[33]  Brian J. Tighe,et al.  A review of biodegradable polymers: uses, current developments in the synthesis and characterization of biodegradable polyesters, blends of biodegradable polymers and recent advances in biodegradation studies , 1998 .