Effect of copper stearate as catalysts on the performance of in-situ combustion process for heavy oil recovery and upgrading

[1]  M. Varfolomeev,et al.  Mechanistic and kinetic insight into catalytic oxidation process of heavy oil in in-situ combustion process using copper (Ⅱ) stearate as oil soluble catalyst , 2021 .

[2]  Wan-fen Pu,et al.  Low-temperature combustion characteristics of heavy oils by a self-designed porous medium thermo-effect cell , 2020 .

[3]  M. Varfolomeev,et al.  Catalytic effect of clay rocks as natural catalysts on the combustion of heavy oil , 2020 .

[4]  A. Turta,et al.  THAI process: Determination of the quality of burning from gas composition taking into account the coke gasification and water-gas shift reactions , 2020 .

[5]  Wan-fen Pu,et al.  Low-temperature combustion behavior of crude oils in porous media under air flow condition for in-situ combustion (ISC) process , 2020 .

[6]  M. Varfolomeev,et al.  Thermal effect caused by low temperature oxidation of heavy crude oil and its in-situ combustion behavior , 2020 .

[7]  Q. Song,et al.  Comparative study on the coking characteristics of two low-asphaltene heavy oils and their main fractions , 2020 .

[8]  M. Varfolomeev,et al.  Combustion behavior of aromatics and their interaction with n-alkane in in-situ combustion enhanced oil recovery process: Thermochemistry , 2019, Journal of Industrial and Engineering Chemistry.

[9]  M. Varfolomeev,et al.  Comparison of oxidation behavior of linear and branched alkanes , 2019, Fuel Processing Technology.

[10]  Wan-fen Pu,et al.  Low-temperature oxidation of light and heavy oils via thermal analysis: Kinetic analysis and temperature zone division , 2018, Journal of Petroleum Science and Engineering.

[11]  M. Varfolomeev,et al.  Copper stearate as a catalyst for improving the oxidation performance of heavy oil in in-situ combustion process , 2018, Applied Catalysis A: General.

[12]  Wan-fen Pu,et al.  Oxidation Behavior and Kinetics of Eight C20–C54 n-Alkanes by High Pressure Differential Scanning Calorimetry (HP-DSC) , 2018, Energy & Fuels.

[13]  M. Varfolomeev,et al.  Oxidation Behavior and Kinetics of Light, Medium, and Heavy Crude Oils Characterized by Thermogravimetry Coupled with Fourier Transform Infrared Spectroscopy , 2018 .

[14]  E. V. Kopylova,et al.  Oxidation Behavior of Light Crude Oil and Its SARA Fractions Characterized by TG and DSC Techniques: Differences and Connections , 2017 .

[15]  J. Wood,et al.  Laboratory investigation of CAPRI catalytic THAI-add-on process for heavy oil production and in situ upgrading , 2017 .

[16]  A. Kovscek,et al.  Analysis of the effects of copper nanoparticles on in-situ combustion of extra heavy-crude oil , 2017 .

[17]  J. Wood,et al.  In-situ catalytic upgrading of heavy oil using dispersed bionanoparticles supported on gram-positive and gram-negative bacteria , 2017 .

[18]  M. V. Kok,et al.  Thermal decomposition of Tatarstan Ashal’cha heavy crude oil and its SARA fractions , 2016 .

[19]  J. Lloyd,et al.  Upgrading of heavy oil by dispersed biogenic magnetite catalysts , 2016 .

[20]  N. Freitag.  Chemical-Reaction Mechanisms That Govern Oxidation Rates During In-Situ Combustion and High-Pressure Air Injection , 2016 .

[21]  J. Wood,et al.  A comparative study of fixed-bed and dispersed catalytic upgrading of heavy crude oil using-CAPRI , 2015 .

[22]  B. Hascakir,et al.  Laboratory screening tests on the effect of initial oil saturation for the dynamic control of in-situ combustion , 2015 .

[23]  Nashaat N. Nassar,et al.  Comparing kinetics and mechanism of adsorption and thermo-oxidative decomposition of Athabasca asphaltenes onto TiO2, ZrO2, and CeO2 nanoparticles , 2014 .

[24]  O. V. Trevisan,et al.  Catalytic Effect Of Metallic Additives On In-situ Combustion Of Two Brazilian Medium And Heavy Oils , 2014 .

[25]  Y. Mortazavi,et al.  Enhanced pyrolysis and oxidation of asphaltenes adsorbed onto transition metal oxides nanoparticles towards advanced in-situ combustion EOR processes by nanotechnology , 2014 .

[26]  A. Kovscek,et al.  Fuel Formation and Conversion During In-Situ Combustion of Crude Oil , 2013 .

[27]  M. Ranjbar,et al.  Thermocatalytic in situ combustion: Influence of nanoparticles on crude oil pyrolysis and oxidation , 2013 .

[28]  German Luna,et al.  Kinetics of the catalytic thermo-oxidation of asphaltenes at isothermal conditions on different metal oxide nanoparticle surfaces , 2013 .

[29]  A. Kovscek,et al.  An experimental investigation of the in-situ combustion behavior of Karamay crude oil , 2013 .

[30]  Tayfun Babadagli,et al.  Enhancement of the efficiency of in situ combustion technique for heavy-oil recovery by application of nickel ions , 2013 .

[31]  M. Husein,et al.  Oxidation of asphaltenes adsorbed onto NiO nanoparticles , 2012 .

[32]  N. Nassar,et al.  Iron oxide nanoparticles for rapid adsorption and enhanced catalytic oxidation of thermally cracked asphaltenes , 2012 .

[33]  Sudarshan A. Mehta,et al.  Experimental Investigation of In-Situ Combustion at Low Air Fluxes , 2011 .

[34]  N. Mahinpey,et al.  The low temperature oxidation of Fosterton asphaltenes and its combustion kinetics , 2011 .

[35]  R. Hughes,et al.  Comparison of conventional and catalytic in-situ combustion processes for oil recovery , 2009 .

[36]  M. Greaves,et al.  In Situ Upgrading of Athabasca Tar Sand Bitumen Using Thai , 2006 .

[37]  R. G. Moore,et al.  Investigation of the Oxidation Behaviour of Pure Hydrocarbon Components and Crude Oils Utilizing PDSC Thermal Technique , 2006 .

[38]  A. Kovscek,et al.  Improved In-Situ Combustion Performance With Metallic Salt Additives , 2005 .

[39]  M. V. Kok,et al.  Characterization and Kinetics of Light Crude Oil Combustion in the Presence of Metallic Salts , 2004 .

[40]  S. Baǧci,et al.  The effects of metallic catalysts on light crude oil oxidation in limestone medium , 2002 .

[41]  M. Kök,et al.  Catalytic Effects of Metallic Additives on The Combustion Properties of Crude Oils by Thermal Analysis Techniques , 2001 .

[42]  Malcolm Greaves,et al.  THAI-New Air Injection Technology for Heavy Oil Recovery and In Situ Upgrading , 2001 .

[43]  P. S. Sarathi,et al.  In-Situ Combustion Handbook -- Principles and Practices , 1999 .

[44]  L. Castanier,et al.  In Situ Combustion With Metallic Additives , 1992 .

[45]  L. Castanier,et al.  Modifying In-Situ Combustion Performance by the Use of Water-Soluble Additives , 1991 .

[46]  S. Vossoughi,et al.  Catalytic effect of heavy metal oxides on crude oil combustion , 1987 .