Ultrafine-Grained Plates of Al-Mg-Si Alloy Obtained by Incremental Equal Channel Angular Pressing: Microstructure and Mechanical Properties
暂无分享,去创建一个
M. Lewandowska | L. Olejnik | A. Rosochowski | W. Chromiński | M. Lipińska | J. Goliński | W. Chrominski
[1] T. Langdon,et al. The Strength–Grain Size Relationship in Ultrafine-Grained Metals , 2016, Metallurgical and Materials Transactions A.
[2] M. Lewandowska,et al. Precipitation phenomena in ultrafine grained Al–Mg–Si alloy with heterogeneous microstructure , 2016 .
[3] M. Lewandowska,et al. Microstructure and mechanical properties of friction stir welded joints made from ultrafine grained aluminium 1050 , 2015 .
[4] M. Ketabchi,et al. Gradual formation of nano/ultrafine structure under accumulative press bonding (APB) process , 2015 .
[5] Guohua Wu,et al. Enhancement of superplasticity in a fine-grained Mg–3Gd–1Zn alloy processed by equal-channel angular pressing , 2015 .
[6] R. Valiev,et al. Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al–Mg–Si alloys , 2015 .
[7] K. Sivaprasad,et al. Mechanical anisotropy and microstructural changes during cryorolling of Al–Mg–Si alloy , 2015 .
[8] M. Vedani,et al. Microstructure, mechanical behavior and low temperature superplasticity of ECAP processed ZM21 Mg alloy , 2015 .
[9] M. Lewandowska,et al. Grain refinement in technically pure aluminium plates using incremental ECAP processing , 2015 .
[10] A. K. Tieu,et al. Investigation of ultrafine grained AA1050 fabricated by accumulative roll bonding , 2014 .
[11] M. Lewandowska,et al. Incremental ECAP as a novel tool for producing ultrafine grained aluminium plates , 2014 .
[12] K. Kurzydłowski,et al. Precipitation strengthening of ultrafine-grained Al–Mg–Si alloy processed by hydrostatic extrusion , 2014 .
[13] Brandon D. Saller,et al. Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle , 2014 .
[14] Ruslan Z. Valiev,et al. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity , 2014 .
[15] T. Langdon. Achieving superplasticity in ultrafine-grained metals , 2013 .
[16] T. Langdon,et al. A characterization of microstructure and microhardness on longitudinal planes of an Al–Mg–Si alloy processed by ECAP , 2013 .
[17] R. Valiev,et al. Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development , 2013 .
[18] T. Langdon,et al. The development of hardness homogeneity in a Cu–Zr alloy processed by equal-channel angular pressing , 2012 .
[19] R. Valiev,et al. Enhanced grain refinement of an Al–Mg–Si alloy by high-pressure torsion processing at 100 °C , 2012 .
[20] Roberto B. Figueiredo,et al. Ultrafine grains and the Hall-Petch relationship in an Al-Mg-Si alloy processed by high-pressure torsion , 2012 .
[21] Thomas Böllinghaus,et al. Materials Challenges and Testing for Supply of Energy and Resources , 2012 .
[22] S. Suwas,et al. Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086 , 2011 .
[23] M. I. A. E. Aal,et al. Influence of the pre-homogenization treatment on the microstructure evolution and the mechanical properties of Al-Cu alloys processed by ECAP , 2011 .
[24] H. Maier,et al. Equal-channel angular sheet extrusion of interstitial-free (IF) steel: Microstructural evolution and mechanical properties , 2011 .
[25] M. Hernandez-Rodriguez,et al. Evaluation of the tribological properties of an Al–Mg–Si alloy processed by severe plastic deformation , 2011 .
[26] D. N. Travessa,et al. High Strength AA7050 Al alloy processed by ECAP: Microstructure and mechanical properties , 2011 .
[27] K. Kurzydłowski,et al. Ab initio calculations of the generalized stacking fault energy in aluminium alloys , 2011 .
[28] N. Gao,et al. Hardness homogeneity on longitudinal and transverse sections of an aluminum alloy processed by ECAP , 2011 .
[29] W. Gan,et al. Microstructure and mechanical properties of the accumulative roll bonded (ARBed) pure magnesium sheet , 2010 .
[30] Hyoung-Seop Kim,et al. Dynamic ageing and the mechanical response of Al–Mg–Si alloy through equal channel angular pressing , 2010 .
[31] H. Maier,et al. Characterization of grain microstructure development in the aluminum alloy EN AW-6060 during extrusion , 2010 .
[32] L. Meyer,et al. Work-hardening stages of AA1070 and AA6060 after severe plastic deformation , 2010 .
[33] W. Skrotzki,et al. Plastic anisotropy of ultrafine grained aluminium alloys produced by accumulative roll bonding , 2010 .
[34] L. Meyer,et al. Improvement of strength and ductility for a 6056 aluminum alloy achieved by a combination of equal-channel angular pressing and aging treatment , 2010 .
[35] R. Lapovok,et al. ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016. Part 1: microstructure , 2010 .
[36] H. Vehoff,et al. Plastic deformation mechanism of ultra-fine-grained AA6063 processed by equal-channel angular pressing , 2010 .
[37] Patrick B. Berbon,et al. Principles of ECAP–Conform as a continuous process for achieving grain refinement: Application to an aluminum alloy , 2010 .
[38] T. Langdon,et al. Microstructural evolution in high purity aluminum processed by ECAP , 2009 .
[39] H. Maier,et al. Monitoring the fatigue-induced damage evolution in ultrafine-grained interstitial-free steel utilizing digital image correlation , 2009 .
[40] L. Krüger,et al. Simultaneous improvement of strength and ductility of Al–Mg–Si alloys by combining equal-channel angular extrusion with subsequent high-temperature short-time aging , 2009 .
[41] A. Mondal,et al. Evolution of microstructure and texture in an ultrafine-grained Al6082 alloy during severe plastic deformation , 2008 .
[42] J. C. Werenskiold,et al. Dynamic precipitation during severe plastic deformation of an Al–Mg–Si aluminium alloy , 2008 .
[43] J. C. Werenskiold,et al. Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing , 2008 .
[44] M. Richert,et al. Incremental ECAP of Plates , 2008 .
[45] T. Langdon,et al. The evolution of homogeneity on longitudinal sections during processing by ECAP , 2008 .
[46] A. Almajid,et al. Enhancement of mechanical properties and grain size refinement of commercial purity aluminum 1050 processed by ECAP , 2007 .
[47] T. Mcnelley,et al. Influence of ECAP processing parameters on texture and microstructure of commercially pure aluminum , 2006 .
[48] R. Valiev,et al. Principles of equal-channel angular pressing as a processing tool for grain refinement , 2006 .
[49] T. Langdon,et al. Microtexture and microstructure evolution during processing of pure aluminum by repetitive ECAP , 2006 .
[50] M. Meyers,et al. Mechanical properties of nanocrystalline materials , 2006 .
[51] E. Pereloma,et al. Microstructure and texture evolution of bcc and fcc metals subjected to equal channel angular extrusion , 2006 .
[52] G. Raab. Plastic flow at equal channel angular processing in parallel channels , 2005 .
[53] E. Evangelista,et al. EBSD FEG-SEM, TEM and XRD techniques applied to grain study of a commercially pure 1200 aluminum subjected to equal-channel angular-pressing. , 2005, Micron.
[54] T. Langdon,et al. The evolution of homogeneity and grain refinement during equal-channel angular pressing: A model for grain refinement in ECAP , 2005 .
[55] Y. Nishida,et al. Characteristics of plastic deformation by rotary-die equal-channel angular pressing , 2005 .
[56] T. Langdon,et al. Achieving Superplasticity of Al-1%Mg-0.2%Sc Alloy in Plate Samples Processed by Equal-channel Angular Pressing , 2004 .
[57] J. Bowen,et al. Ultra-fine grain structures in aluminium alloys by severe deformation processing , 2004 .
[58] P. Sun,et al. Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion , 2004 .
[59] T. Langdon,et al. Equal-channel angular pressing using plate samples , 2003 .
[60] T. Langdon,et al. Factors influencing the shearing patterns in equal-channel angular pressing , 2002 .
[61] T. Langdon,et al. The use of severe plastic deformation for microstructural control , 2002 .
[62] P. Sun,et al. Characteristics of submicron grained structure formed in aluminum by equal channel angular extrusion , 2000 .
[63] P. Prangnell,et al. The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE , 2000 .
[64] N. Tsuji,et al. Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process , 1999 .
[65] Tetsuo Sakai,et al. Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process , 1999 .
[66] Terence G. Langdon,et al. The shearing characteristics associated with equal-channel angular pressing , 1998 .
[67] Terence G. Langdon,et al. The process of grain refinement in equal-channel angular pressing , 1998 .
[68] N. Hansen,et al. High angle boundaries formed by grain subdivision mechanisms , 1997 .
[69] W. Nix,et al. Strain hardening and substructural evolution in NiCo solid solutions at large strains , 1989 .
[70] P. Van Houtte,et al. Large strain work hardening and textures , 1980 .
[71] J. Mackenzie,et al. SECOND PAPER ON STATISTICS ASSOCIATED WITH THE RANDOM DISORIENTATION OF CUBES , 1958 .
[72] E. Hall,et al. The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .