"Overpass" at the junction of a crossed microchannel: an enabler for 3D microfluidic chips.

Reported here is the design and fabrication of three-dimensional (3D) "overpass" microstructures at the junction of crossed microfluidic channels by femtosecond laser direct writing of photopolymers. The post-integrated overpass could be used for guiding different microfluids across the junction without mixing; therefore it is proposed as an enabler for achieving 3D microfluidic chips based on conventional two-dimensional (2D) microchannels. As representative examples, bi-crossed and tri-crossed microchannels have been equipped with bi-connected and tri-connected overpasses, respectively. Flow tests confirm 3D flowing capability. The integration of such overpass structures at the microchannel junction provides an opportunity to impart 3D capability to conventional 2D microchips, thus the method may hold great promise for both functionalization and miniaturization of Lab-on-a-Chip systems.

[1]  Bingcheng Lin,et al.  Electrophoretic separations on microfluidic chips , 2007, Journal of Chromatography A.

[2]  Yong‐Lai Zhang,et al.  Embellishment of microfluidic devices via femtosecond laser micronanofabrication for chip functionalization. , 2010, Lab on a chip.

[3]  Yong‐Lai Zhang,et al.  Designable 3D nanofabrication by femtosecond laser direct writing , 2010 .

[4]  D T Chiu,et al.  Using three-dimensional microfluidic networks for solving computationally hard problems , 2001, Proceedings of the National Academy of Sciences of the United States of America.

[5]  J. Lewis,et al.  Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly , 2003, Nature materials.

[6]  Ran Zhang,et al.  A SERS‐active microfluidic device with tunable surface plasmon resonances , 2011, Electrophoresis.

[7]  G M Whitesides,et al.  Fabrication of topologically complex three-dimensional microfluidic systems in PDMS by rapid prototyping. , 2000, Analytical chemistry.

[8]  Sergio L S Freire,et al.  CRITICAL REVIEW www.rsc.org/loc | Lab on a Chip Proteome-on-a-chip: Mirage, or on the horizon? , 2006 .

[9]  Limu Wang,et al.  A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips. , 2010, Lab on a chip.

[10]  H. Craighead.  Future lab-on-a-chip technologies for interrogating individual molecules , 2006, Nature.

[11]  Aaron R Wheeler,et al.  Technique for real-time measurements of endothelial permeability in a microfluidic membrane chip using laser-induced fluorescence detection. , 2010, Analytical chemistry.

[12]  George M Whitesides,et al.  Prototyping of microfluidic devices in poly(dimethylsiloxane) using solid-object printing. , 2002, Analytical chemistry.

[13]  Dong-Yol Yang,et al.  Three-dimensionally crossing manifold micro-mixer for fast mixing in a short channel length. , 2011, Lab on a chip.

[14]  Polyacrylamide gel photopatterning enables automated protein immunoblotting in a two-dimensional microdevice. , 2010, Journal of the American Chemical Society.

[15]  Bingcheng Lin,et al.  Patterned paper as a low-cost, flexible substrate for rapid prototyping of PDMS microdevices via "liquid molding". , 2011, Analytical chemistry.

[16]  George M. Whitesides,et al.  Fabrication of Liquid‐Core Waveguides by Soft Lithography , 1999 .

[17]  Hong Xia,et al.  Femtosecond laser rapid prototyping of nanoshells and suspending components towards microfluidic devices. , 2009, Lab on a chip.

[18]  Samuel Tia,et al.  On-chip technologies for multidimensional separations. , 2009, Lab on a chip.

[19]  Koji Sugioka,et al.  Rapid prototyping of three-dimensional microfluidic mixers in glass by femtosecond laser direct writing. , 2012, Lab on a chip.

[20]  G. Whitesides,et al.  Patterned deposition of cells and proteins onto surfaces by using three-dimensional microfluidic systems. , 2000, Proceedings of the National Academy of Sciences of the United States of America.

[21]  Matthieu Piel,et al.  Microfluidic tools for cell biological research. , 2010, Nano today.

[22]  Hong-Bo Sun,et al.  On-chip fabrication of silver microflower arrays as a catalytic microreactor for allowing in situ SERS monitoring. , 2012, Chemical communications.

[23]  Yanju Wang,et al.  Integrated Microfluidic Reactors. , 2009, Nano today.

[24]  Xiuqing Gong,et al.  Wax-bonding 3D microfluidic chips. , 2010, Lab on a chip.

[25]  Hong Xia,et al.  High performance magnetically controllable microturbines. , 2010, Lab on a chip.

[26]  Yong‐Lai Zhang,et al.  Flexible nanowiring of metal on nonplanar substrates by femtosecond-laser-induced electroless plating. , 2010, Small.

[27]  Aaron R Wheeler,et al.  A microfluidic platform for complete mammalian cell culture. , 2010, Lab on a chip.

[28]  Richard N. Zare,et al.  Perforated membrane method for fabricating three-dimensional polydimethylsiloxane microfluidic devices. , 2008, Lab on a chip.

[29]  Tianyue Yu,et al.  An efficient two-photon-generated photoacid applied to positive-tone 3D microfabrication. , 2002, Science.

[30]  Hiroaki Misawa,et al.  A simultaneous space sampling method for DNA fraction collection using a comb structure in microfluidic devices , 2011, Electrophoresis.

[31]  Hongkai Wu,et al.  Fabrication of complex three-dimensional microchannel systems in PDMS. , 2003, Journal of the American Chemical Society.