Laser ablation deposition of Cu‐Ni and Ag‐Ni films: Nonconservation of alloy composition and film microstructure

Laser ablation deposition was used to grow polycrystalline Cu‐Ni and Ag‐Ni thin films on amorphous substrates at room temperature. X‐ray diffraction was employed to determine the phases present and the residual macrostress and to analyze the structural imperfection in terms of crystallite size and microstrain. For confirmation and complementary microstructural data transmission electron microscopy was applied. Analysis of the gross composition was achieved by electron probe microanalysis and x‐ray fluorescence. The films contained substantially less Cu and Ag than the targets, which was caused by preferential scattering of ablated Cu and Ag species upon incidence at the growing films. The Cu‐Ni films were entirely composed of a CuxNi1−x solid solution. The Ag‐Ni films were composed of a AgxNi1−x solid solution and of pure Ag and pure Ni. The nonequilibrium AgxNi1−x solid solution could contain up to 44 at. % Ag. The residual macrostress in the Cu‐Ni films was compressive, whereas it was tensile in the Ag‐...

[1]  J. Narayan,et al.  Fabrication of Ni–Al thin films by the pulsed laser deposition technique , 1992 .

[2]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .

[3]  D H Evans.  Vacuum Technology (2nd edn) , 1984 .

[4]  Jon M. Baldwin.  Q-Switched Laser Sampling of Copper—Zinc Alloys , 1970 .

[5]  Hoi Sing Kwok,et al.  Generation of high‐energy atomic beams in laser‐superconducting target interactions , 1989 .

[6]  Graham K. Hubler,et al.  Pulsed Laser Deposition , 1992 .

[7]  H. Windischmann.  An intrinsic stress scaling law for polycrystalline thin films prepared by ion beam sputtering , 1987 .

[8]  E. J. Mittemeijer,et al.  Use of the Voigt function in a single-line method for the analysis of X-ray diffraction line broadening , 1982 .

[9]  C. A. Becker,et al.  Measurement of fast desorption kinetics of D2, from tungsten by laser induced thermal desorption , 1978 .

[10]  J. Vossen,et al.  Thin Film Processes , 1979 .

[11]  J. Perrière,et al.  Laser Assisted Deposition of Thin BiSrCaCuO Films , 1990 .

[12]  T. Venkatesan,et al.  Observation of two distinct components during pulsed laser deposition of high Tc superconducting films , 1988 .

[13]  T. Venkatesan,et al.  Preparation of Y‐Ba‐Cu oxide superconductor thin films using pulsed laser evaporation from high Tc bulk material , 1987 .

[14]  John M. Dawson,et al.  Optical Absorption and Expansion of Laser‐Produced Plasmas , 1969 .

[15]  Howard M. Smith,et al.  Vacuum Deposited Thin Films Using a Ruby Laser , 1965 .

[16]  R. D. Greenough,et al.  Spectroscopic and ion probe measurements of KrF laser ablated Y‐Ba‐Cu‐O bulk samples , 1988 .

[17]  M. Allmen.  Laser-beam interactions with materials , 1987 .

[18]  U C Paek,et al.  Observation of Laser-induced Explosion of Solid Materials and Correlation with Theory. , 1974, Applied optics.

[19]  P. Willich,et al.  Composition and thickness of submicron metal coatings and multilayers on Si determined by EPMA , 1988 .

[20]  R. Delhez,et al.  Role of X-Ray Diffraction Analysis in Surface Engineering: Investigation of Microstructure of Nitrided Iron and Steels , 1987 .

[21]  R. Lucchese,et al.  Effects of gas‐phase collisions in rapid desorption of molecules from surfaces in the presence of coadsorbates , 1988 .

[22]  Pierre Villars,et al.  Pearson's handbook of crystallographic data for intermetallic phases , 1985 .

[23]  R. Kelly.  On the dual role of the Knudsen layer and unsteady, adiabatic expansion in pulse sputtering phenomena , 1990 .

[24]  Joshua E. Rothenberg,et al.  Laser sputtering: Part I. On the existence of rapid laser sputtering at 193 nm , 1985 .

[25]  H. Helvajian,et al.  Laser photodecomposition of sintered YBa2Cu3O6+x: Ejected species population distributions and initial kinetic energies for the laser ablation wavelengths 351, 248, and 193 nm , 1991 .

[26]  J. Ready.  Effects of high-power laser radiation , 1971 .

[27]  M. Somers,et al.  Phase transformations and stress relaxation in γ′-Fe4N1-x surface layers during oxidation , 1990 .

[28]  R. Tertian,et al.  Principles of Quantitative X-ray Fluorescence Analysis , 1982 .

[29]  F. d'Heurle,et al.  Aluminum films deposited by rf sputtering , 1970 .

[30]  D. N. Mashburn,et al.  Characterization of ground‐state neutral and ion transport during laser ablation of Y1Ba2Cu3O7−x using transient optical absorption spectroscopy , 1989 .

[31]  Jeffrey T. Cheung,et al.  Growth of thin films by laser-induced evaporation , 1988 .

[32]  R. Delhez,et al.  An improved α2 elimination , 1975 .

[33]  J. Verhoeven,et al.  Specimen preparation technique for high resolution transmission electron microscopy studies on model supported metal catalysts , 1986 .