Intermetallic compound formation in Sn-Co-Cu, Sn-Ag-Cu and eutectic Sn-Cu solder joints on electroless Ni(P) immersion au surface finish after reflow soldering

The interfacial reactions between Sn-0.4Co-0.7Cu eutectic alloy and immersion Au/electroless Ni(P)/Cu substrate were investigated after reflow soldering at 260degC for 2 minutes. Common Sn-4.0Ag-0.5Cu and eutectic Sn-0.7Cu solders were used as reference. Two types of intermetallic compounds (IMC) were found in the solder matrix of the Sn-0.4Co-0.7Cu alloy, namely coarser CoSn2 and finer Cu6 Sn5 particles, while only one ternary (Cu,Ni)6 Sn5 interfacial compound was detected between the solder alloy and the ENIG (electroless nickel and immersion gold) coated substrate. The same trend was also observed for the Sn-Ag-Cu and Sn-Cu solder joints. Compared with the CoSn2 particles found in the Sn-Co-Cu solder and the Ag3Sn particles found in the Sn-Ag-Cu solder, the Cu6Sn5 particles found in both solder systems exhibited finer structure and more uniform distribution. It was noted that the thickness of the interfacial IMCs for the Sn-Co-Cu, Sn-Ag-Cu and Sn-Cu alloys was 3.5mum, 4.3mum and 4.1mum, respectively, as a result of longer reflow time above the alloy's melting temperature since the Sn-Ag-Cu solder alloy has the lowest melting point

[1]  Tomi Laurila,et al.  Interfacial reactions between lead-free solders and common base materials , 2005 .

[2]  M. Li,et al.  Effects of substrate metallization of solder/under-bump metallization interfacial reactions in flip-chip packages during multiple reflow cycles , 2003 .

[3]  Paul Conway,et al.  Characteristics of intermetallics and micromechanical properties during thermal ageing of Sn–Ag–Cu flip-chip solder interconnects , 2005 .

[4]  Tsung-Yu Pan,et al.  Intermetallic compound growth on Ni, Au/Ni, and Pd/Ni substrates with Sn/Pb, Sn/Ag, and Sn solders [PWBs] , 1998, 1998 Proceedings. 48th Electronic Components and Technology Conference (Cat. No.98CH36206).

[5]  Y. Chan,et al.  Reliability studies of surface mount, solder joints-effect of Cu-Sn intermetallic compounds , 1995 .

[6]  K. Tu,et al.  Tin–lead (SnPb) solder reaction in flip chip technology , 2001 .

[7]  Y. C. Chan,et al.  Aging studies of Cu-Sn intermetallic compounds in annealed surface mount solder joints , 1996, 1996 Proceedings 46th Electronic Components and Technology Conference.

[8]  J. Kivilahti,et al.  Use of multicomponent phase diagrams for predicting phase evolution in solder/conductor systems , 2001 .

[9]  P. Tu,et al.  Effect of intermetallic compounds on the thermal fatigue of surface mount solder joints , 1997 .

[10]  Zhaonian Cheng,et al.  High temperature aging study of intermetallic compound formation of Sn-3.5Ag and Sn-4.0Ag-0.5Cu solders on electroless Ni (P) metallization , 2006, 56th Electronic Components and Technology Conference 2006.

[11]  Y. L. Lin,et al.  Strong effect of Cu concentration on the reaction between lead-free microelectronic solders and Ni , 2002 .

[12]  Y. Chan,et al.  Effect of volume in interfacial reaction between eutectic Sn-Pb solder and Cu metallization in microelectronic packaging , 2004 .

[13]  J. Shang,et al.  Influence of microstructure on fatigue crack growth behavior of Sn-Ag solder interfaces , 2000 .

[14]  J. Foley,et al.  Analysis of ring and plug shear strengths for comparison of lead-free solders , 2000 .

[15]  Y. Chan,et al.  Dissolution kinetics of BGA Sn–Pb and Sn–Ag solders with Cu substrates during reflow , 2004 .

[16]  K. S. Kim,et al.  Effects of cooling speed on microstructure and tensile properties of Sn–Ag–Cu alloys , 2002 .

[17]  M. Abtew,et al.  Lead-free Solders in Microelectronics , 2000 .

[18]  Cheol-Woong Yang,et al.  Intermetallic compound layer growth at the interface between Sn-Cu-Ni solder and Cu substrate , 2004 .

[19]  Seung-Boo Jung,et al.  Interfacial reactions and shear strengths between Sn-Ag-based Pb-free solder balls and Au/EN/Cu metallization , 2004 .

[20]  C. Kao,et al.  Reaction of solder with Ni/Au metallization for electronic packages during reflow soldering , 2001 .

[21]  W. T. Chen,et al.  Reflow soldering and isothermal solid-state aging of Sn-Ag eutectic solder on Au/Ni surface finish , 2001 .

[22]  Dongkai Shangguan,et al.  Analysis of crack growth in solder joints , 1999 .

[23]  Y. C. Chan,et al.  Growth kinetic studies of Cu–Sn intermetallic compound and its effect on shear strength of LCCC SMT solder joints , 1998 .

[24]  S. Jung,et al.  Investigation of interfacial reaction between Sn-Ag eutectic solder and Au/Ni/Cu/Ti thin film metallization , 2001 .

[25]  M. J. Rizvi,et al.  Dissolution of electroless Ni metallization by lead-free solder alloys , 2005 .

[26]  Johan Liu,et al.  Thermodynamic assessment of the Sn-Co lead-free solder system , 2004 .

[27]  Katsuaki Suganuma,et al.  Effects of intermetallic compounds on properties of Sn–Ag–Cu lead-free soldered joints , 2003 .

[28]  James C. Foley,et al.  Alloying effects in near-eutectic Sn-Ag-Cu solder alloys for improved microstructural stability , 2001 .

[29]  Vesa Vuorinen,et al.  Interfacial reactions between lead-free SnAgCu solder and Ni(P) surface finish on printed circuit boards , 2002 .

[30]  Chang-Da Tsai,et al.  A study on the reaction between Cu and Sn3.5Ag solder doped with small amounts of Ni , 2003 .