Automatic Generation Control of Nuclear Heating Reactor Power Plants

A nuclear heating reactor (NHR) is a typical integral pressurized water reactor (iPWR) with advanced design features such as an integral primary circuit, self-pressurization, full-power-range natural circulation, and hydraulic control rods. Through adjusting its electric power output according to the variation of demand, NHR power plants can be adopted to stablize the fluctuation of grid frequency caused by the intermittent nature of renewable generation, which is useful for deepening the penetration of renewables. The flexibility of an NHR power plant relies on the automatic generation control (AGC) function of the plant coordination control system, whose central is the AGC law. In this paper, the plant control system with AGC function is designed for NHR plants, where the AGC is realized based on the stabilizers of grid frequency and main steam pressure. Then, the AGC problem is transferred to the disturbance attenuation problem of a second-order dynamic system, and an active disturbance attenuation control (ADRC), which is just the addition of a feedback control given by a proportional‒integral (PI) law and a feedforward control driven by a disturbance observer (DO), is then proposed. Finally, this ADRC is applied to realize the AGC function for NHR-200II reactor power plant, and numerical simulation results show the implementation feasibility and satisfactory performance.

[1]  D. T. Ingersoll,et al.  NuScale small modular reactor for Co-generation of electricity and water , 2014 .

[2]  Wang Dazhong,et al.  Technical design features and safety analysis of the 200 MWt Nuclear Heating Reactor , 1993 .

[3]  Zhe Dong,et al.  PD Power-Level Control Design for PWRs: A Physically-Based Approach , 2013, IEEE Transactions on Nuclear Science.

[4]  Dafang Zhang,et al.  The 200 MW nuclear heating reactor and its possible application in seawater desalination , 1994 .

[5]  Jasmina L. Vujic,et al.  Small modular reactors: Simpler, safer, cheaper? , 2012 .

[6]  Zhe Dong,et al.  A lumped-parameter dynamical model of a nuclear heating reactor cogeneration plant , 2018 .

[7]  Camille Cany,et al.  Nuclear power supply: Going against the misconceptions. Evidence of nuclear flexibility from the French experience , 2018 .

[8]  Siddharth Suman,et al.  Hybrid nuclear-renewable energy systems: A review , 2018 .

[9]  Jiyun Zhao,et al.  Small and Medium sized Reactors (SMR): A review of technology , 2015 .

[10]  Zhi Zhou,et al.  The benefits of nuclear flexibility in power system operations with renewable energy , 2018, Applied Energy.

[11]  Cristian Rabiti,et al.  Optimal sizing of flexible nuclear hybrid energy system components considering wind volatility , 2018 .

[12]  Zhi Zhou,et al.  Profitability Evaluation of Load-Following Nuclear Units with Physics-Induced Operational Constraints , 2017 .

[13]  Bo Zhang,et al.  Modeling and control of nuclear reactor cores for electricity generation: A review of advanced technologies , 2016 .

[14]  Wang Dazhong,et al.  NHR-200 nuclear energy system and its possible applications , 1995 .

[15]  Maria Lykidi,et al.  Optimal management of flexible nuclear power plants in a decarbonising competitive electricity market: The French case , 2017 .

[16]  Wang Dazhong,et al.  Experimental study and operation experiences of the 5 MW Nuclear Heating Reactor , 1993 .

[17]  Zhe Dong,et al.  Water-Level Control for the U-Tube Steam Generator of Nuclear Power Plants Based on Output Feedback Dissipation , 2009, IEEE Transactions on Nuclear Science.

[18]  Wang Dazhong.  The design characteristics and construction experiences of the 5 MWt Nuclear Heating Reactor , 1993 .

[19]  Wang Dazhong,et al.  Chinese nuclear heating test reactor and demonstration plant , 1992 .

[20]  Daniel T Ingersoll,et al.  Deliberately Small Reactors and the Second Nuclear Era , 2009 .

[21]  Wenxiang Zheng,et al.  Investigation on three seawater desalination processes coupled with NHR-200 , 2012 .