Weight and mechanical performance optimization of blended composite wing panels using lamination parameters

In this paper, a lamination parameter-based approach to weight optimization of composite aircraft wing structures is addressed. It is a bi-level procedure where at the top level lamination parameters and numbers of plies of the pre-defined angles (0, 90, 45 and −45°) are used as design variables, the material volume is treated as an objective function to be minimized subject to the buckling, strength and ply percentage constraints. At the bottom level the optimum stacking sequence is obtained subject to the requirements on blending and preservation of mechanical properties. To ensure composite blending, a multi-stage optimization is performed by a permutation genetic algorithm aiming at matching the lamination parameters passed from the top level optimization as well as satisfying the layup rules. Two new additional criteria, the 90° ply angle jump index and the stack homogeneity index, are introduced to control the uniformity of the three ply angles (0, 90, 45 and −45) spread throughout the stack as well as improve the stack quality and mechanical performance by encouraging 45° angle change between neighbouring groups of plies. The results of the application of this approach are compared to published results to demonstrate the potential of the developed technique.

[1]  Layne T. Watson,et al.  Optimal design of composite wing structures with blended laminates , 2004 .

[2]  Raphael T. Haftka,et al.  Two-level composite wing structural optimization using response surfaces , 2000 .

[3]  Michael Chun-Yung Niu,et al.  Airframe Structural Design: Practical Design Information and Data on Aircraft Structures , 1988 .

[4]  Y. Hirano,et al.  Stability optimization of laminated composite plates , 1980 .

[5]  Hideki Sekine,et al.  Feasible region in general design space of lamination parameters for laminated composites , 2002 .

[6]  Klaus Schittkowski,et al.  NLPQL: A fortran subroutine solving constrained nonlinear programming problems , 1986 .

[7]  Vassili Toropov,et al.  Simultaneous model building and validation with uniform designs of experiments , 2007 .

[8]  David Keller,et al.  Global laminate optimization on geometrically partitioned shell structures , 2011 .

[9]  Akira Todoroki,et al.  Stacking Sequence Optimizations using Fractal Branch and Bound Method for Unsymmetrical Laminates , 2005 .

[10]  Koetsu Yamazaki,et al.  Two-level optimization technique of composite laminate panels by genetic algorithms , 1996 .

[11]  M. Zhou,et al.  Optimization of Composite: Recent Advances and Application , 2010 .

[12]  Stéphane Grihon,et al.  A primal-dual backtracking optimization method for blended composite structures , 2012 .

[13]  Zafer Gürdal,et al.  Multi-step blended stacking sequence design of panel assemblies with buckling constraints , 2009 .

[14]  Zafer Gürdal,et al.  General Blending Definitions for Stacking Sequence Design of Composite Laminate Structures , 2008 .

[15]  Christos Kassapoglou,et al.  Stacking Sequence Blending of Multiple Composite Laminates Using Genetic Algorithms , 2002 .

[16]  Paul M. Weaver,et al.  Optimization of anisotropic composite panels with T-shaped stiffeners using linear approximations of the design constraints to identify their stacking sequences , 2008 .

[17]  E. Carrera.  Developments, ideas, and evaluations based upon Reissner’s Mixed Variational Theorem in the modeling of multilayered plates and shells , 2001 .

[18]  Akira Todoroki,et al.  Stacking Sequence Optimization using Fractal Branch and Bound Method , 1999 .

[19]  V. Toropov,et al.  Weight and Manufacturability Optimization of Composite Aircraft Components Based on a Genetic Algorithm , 2005 .

[20]  E. Carrera.  Historical review of Zig-Zag theories for multilayered plates and shells , 2003 .

[21]  Joaquim R. R. A. Martins,et al.  A laminate parametrization technique for discrete ply-angle problems with manufacturing constraints , 2013 .

[22]  Paul M. Weaver,et al.  Enhanced two-level optimization of anisotropic laminated composite plates with strength and buckling constraints , 2009 .

[23]  K Schittkowski.  NLPQLP : A New Fortran Implementation of a Sequential Quadratic Programming Algorithm for Parallel Computing , 2001 .

[24]  Paul M. Weaver,et al.  Optimization of Long Anisotropic Laminated Fiber Composite Panels with T-Shaped Stiffeners , 2007 .

[25]  Hisao Fukunaga,et al.  Optimum Design of Composite Structures for Shape, Layer Angle and Layer Thickness Distributions , 1993 .

[26]  Birna P. Kristinsdottir,et al.  Optimal design of large composite panels with varying loads , 2001 .

[27]  Johann Sienz,et al.  Formulation of the Optimal Latin Hypercube Design of Experiments Using a Permutation Genetic Algorithm , 2004 .

[28]  Zbigniew Michalewicz,et al.  Genetic Algorithms + Data Structures = Evolution Programs , 1996, Springer Berlin Heidelberg.

[29]  Hisao Fukunaga,et al.  On Laminate Configurations for Simultaneous Failure , 1988 .

[30]  Raphael T. Haftka,et al.  Composite wing structural design optimization with continuity constraints , 2001 .

[31]  Osvaldo M. Querin,et al.  Bilevel Optimization of Blended Composite Wing Panels , 2011 .

[32]  Raphael T. Haftka,et al.  Design and optimization of laminated composite materials , 1999 .

[33]  Raphael T. Haftka,et al.  Maximization of buckling loads of composite panels using flexural lamination parameters , 2004 .

[34]  Michael Chun-Yung Niu,et al.  Composite airframe structures : practical design information and data , 1993 .

[35]  Christos Kassapoglou,et al.  Design and Analysis of Composite Structures: With Applications to Aerospace Structures , 2010 .