Characterization, Modeling, and Application of 10-kV SiC MOSFET

Ten-kilovolt SiC MOSFETs are currently under development by a number of organizations in the United States, with the aim of enabling their applications in high-voltage high-frequency power conversions. The aim of this paper is to obtain the key device characteristics of SiC MOSFETs so that their realistic application prospect can be provided. In particular, the emphasis is on obtaining their losses in various operation conditions from the extensive characterization study and a proposed behavioral SPICE model. Using the validated MOSFET SPICE model, a 20-kHz 370-W dc/dc boost converter based on a 10-kV 4H-SiC DMOSFET and diodes is designed and experimentally demonstrated. In the steady state of the boost converter, the total power loss in the 15.45-mm2 SiC MOSFET is 23.6 W for the input power of 428 W. The characterization study of the experimental SiC MOSFET and the experiment of the SiC MOSFET-based boost converter indicate that the turn-on losses of SiC MOSFETs are the dominant factors in determining their maximum operation frequency in hard-switched circuits with conventional thermal management. Replacing a 10-kV SiC PiN diode with a 10-kV SiC JBS diode as a boost diode and using a small external gate resistor, the turn-on loss of the SiC MOSFET can be reduced, and the 10-kV 5-A SiC MOSFET-based boost converter is predicted to be capable of a 20-kHz operation with a 5-kV dc output voltage and a 1.25-kW output power by the PSpice simulation with the MOSFET model. The low losses and fast switching speed of 10-kV SiC MOSFETs shown in the characterization study and the preliminary demonstration of the boost converter make them attractive in high-frequency high-voltage power-conversion applications.

[1]  Jun Wang,et al.  Characteristics of 10 kV SiC MOSFET and PIN Diode and Their Application Prospect in High Voltage High Frequency DC/DC Converter , 2007, 2007 IEEE Power Electronics Specialists Conference.

[2]  Robert L. Steigerwald,et al.  A comparison of high power DC-to-DC soft-switched converter topologies , 1994 .

[3]  M. Hasanuzzaman,et al.  Parameter Extraction and SPICE Model Development for 4H-Silicon Carbide (SiC) Power MOSFET , 2005, 2005 International Semiconductor Device Research Symposium.

[4]  A. Agarwal,et al.  10 kV, 5A 4H-SiC Power DMOSFET , 2006, 2006 IEEE International Symposium on Power Semiconductor Devices and IC's.

[5]  R. Johnson,et al.  Status of silicon carbide (SiC) as a wide-bandgap semiconductor for high-temperature applications: A review , 1996 .

[6]  Shoujue Wang,et al.  An improved simulation model for power MOSFET , 1995, 1995 IEEE TENCON. IEEE Region 10 International Conference on Microelectronics and VLSI. 'Asia-Pacific Microelectronics 2000'. Proceedings.

[7]  A. Agarwal,et al.  10-kV, 123-mOcm2 4H-SiC power DMOSFETs , 2004 .

[8]  F. S. Shoucair,et al.  6H silicon carbide MOSFET modelling for high temperature analogue integrated circuits (25–500°C) , 1996 .

[9]  W. J. Choyke,et al.  Silicon carbide : recent major advances , 2004 .

[10]  High-voltage UMOSFETs in 4H SiC , 2002, Proceedings of the 14th International Symposium on Power Semiconductor Devices and Ics.

[11]  H. Mantooth,et al.  Silicon Carbide Power MOSFET Model and Parameter Extraction Sequence , 2003 .

[12]  P. Shenoy,et al.  The planar 6H-SiC ACCUFET: a new high-voltage power MOSFET structure , 1997, IEEE Electron Device Letters.

[13]  M. Melloch,et al.  High-voltage double-implanted power MOSFET's in 6H-SiC , 1997, IEEE Electron Device Letters.

[14]  Jian H. Zhao,et al.  Study of interface state density and effective oxide charge in post-metallization annealed SiO/sub 2/-SiC structures , 1999 .

[15]  Tiefu Zhao,et al.  Design and Analysis of a 270kW Five-level DC/DC Converter for Solid State Transformer Using 10kV SiC Power Devices , 2007, 2007 IEEE Power Electronics Specialists Conference.

[16]  J Gowar,et al.  Power MOSFETs: Theory and Applications , 1989 .

[17]  Angelo Raciti,et al.  A new PSpice power MOSFET model with temperature dependent parameters: evaluation of performances and comparison with available models , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[18]  J. Cooper,et al.  High-voltage (3 kV) UMOSFETs in 4H-SiC , 2002 .

[19]  H. P. Yee,et al.  SPICE models for power MOSFETs: an update , 1988, APEC '88 Third Annual IEEE Applied Power Electronics Conference and Exposition.

[20]  M.K. Das.  Development of a Commercially Viable 4H-SiC PiN Diode Technology , 2006, 2006 International Biennial Baltic Electronics Conference.

[21]  Anant K. Agarwal,et al.  Large-Area (3.3 mm x 3.3 mm) Power MOSFETs in 4H-SiC , 2002 .

[22]  Steven T. Peake,et al.  Power semiconductor devices , 1995 .

[23]  A. Agarwal,et al.  10 kV, 123 m/spl Omega/-cm/sup 2/ 4H-SiC power DMOSFETs , 2004, Conference Digest [Includes 'Late News Papers' volume] Device Research Conference, 2004. 62nd DRC..

[24]  Vinayak Tilak,et al.  An Approach to Model Temperature Effects of Interface Traps in 4H-SiC , 2007 .

[25]  A. Agarwal,et al.  10-kV, 123-m/spl Omega//spl middot/cm/sup 2/ 4H-SiC power DMOSFETs , 2004, IEEE Electron Device Letters.

[26]  Sei-Hyung Ryu,et al.  A New Degradation Mechanism in High-Voltage SiC Power MOSFETs , 2007, IEEE Electron Device Letters.