Analytic characterization of the permeability of dual-scale fibrous porous media

Abstract It has been known for some time now that fabrics that contain fiber tows, which are bundles of thousands of aligned fiber filaments, can be represented as dual-scale porous media; these tows are woven or stitched together and the flow through the resulting fabrics can be modeled to account for the delayed impregnation of tows, which draw fluid away from the advancing flow front. From such flow simulations, one can predict not only the macroflow front, but also the saturation of the fiber tows, as well as determine the partially-saturated region. The simulations require one to input two material parameters to quantify the two distinct length scales of the porous media: the bulk permeability, which characterizes the overall resistance to the flow, and the tow permeability, which is the resistance to the flow within the tow and is related to the saturation of the fiber tows. Techniques to characterize the bulk permeability are well established and can be performed in one, two, and three dimensions; however, methods to measure tow permeability are sparse. Hence, an analytical model is developed to characterize both permeability values: the bulk permeability ( K ) and the fiber tow permeability ( K t ) from a one-dimensional constant flow rate experiment in which the inlet pressure profile during the filling is recorded. These two permeability values determine the time scales of resin impregnation in between the fiber tows and within the fiber tows thus playing an important role in the decision process of how long to leave the resin injection gate open to ensure filling of the fiber tows. For dual-scale preforms, the inlet pressure profile for a constant rate injection is not only dependant on the structure of the preform and fluid viscosity, but also on the mold length. If the mold is sufficiently long, it can be mathematically proven that the partially-saturated region is constant. Examination of the solution also reveals that the partially-saturated length increases as the bulk permeability increases and as the tow permeability decreases. The analytical methodology is demonstrated by characterizing four different fabrics.

[1]  A. Saouab,et al.  Numerical simulation of void formation in LCM , 2003 .

[2]  Woo Il Lee,et al.  Analysis and minimization of void formation during resin transfer molding process , 2006 .

[3]  S. Advani,et al.  An Experimental Method to Continuously Measure Permeability of Fiber Preforms as a Function of Fiber Volume Fraction , 2002 .

[4]  S. Advani,et al.  Investigation of unsaturated flow in woven, braided and stitched fiber mats during mold‐filling in resin transfer molding , 2001 .

[5]  Woo Il Lee,et al.  Formation of microvoids during resin-transfer molding process , 2000 .

[6]  Boming Zhang,et al.  Effects of cure cycles on void content and mechanical properties of composite laminates , 2006 .

[7]  Suresh G. Advani,et al.  Modelling and simulation of resin transfer moulding (RTM)—gate control, venting and dry spot prediction , 1996 .

[8]  Suresh G. Advani,et al.  EXPERIMENTAL INVESTIGATION OF TRANSVERSE FLOW THROUGH ALIGNED CYLINDERS , 1995 .

[9]  S. F. Shen,et al.  A finite-element/finite-difference simulation of the injection-molding filling process , 1980 .

[10]  S. Advani,et al.  A Model for Unsaturated Flow in Woven Fiber Preforms during Mold Filling in Resin Transfer Molding , 1998 .

[11]  F. Trochu,et al.  Numerical analysis of the resin transfer molding process by the finite element method , 1993 .

[12]  Jan-Anders E. Månson,et al.  The influence of void content on the structural flexural performance of unidirectional glass fibre reinforced polypropylene composites , 2005 .

[13]  Kumar K. Tamma,et al.  Microscale Permeability Predictions of Porous Fibrous Media , 1999, Application of Porous Media Methods for Engineered Materials.

[14]  Suresh G. Advani,et al.  A numerical model to predict fiber tow saturation during liquid composite molding , 2003 .

[15]  Ben Wang,et al.  Optimum tooling design for resin transfer molding with virtual manufacturing and artificial intelligence , 2001 .

[16]  M. Altan,et al.  Three-dimensional features of void morphology in resin transfer molded composites , 2005 .

[17]  S. Advani,et al.  A Simple Model for the Variation of Permeability due to Partial Saturation in Dual Scale Porous Media , 1997 .

[18]  Ranga Pitchumani,et al.  A fractal geometry model for evaluating permeabilities of porous preforms used in liquid composite molding , 1999 .

[19]  Shawn M. Walsh,et al.  Permeability characterization of dual scale fibrous porous media , 2006 .

[20]  Suresh G. Advani,et al.  Numerical simulation of unsaturated flow in woven fiber preforms during the resin transfer molding process , 1998 .

[21]  Christophe Binetruy,et al.  The interactions between flows occurring inside and outside fabric tows during RTM , 1997 .

[22]  Paolo Ermanni,et al.  Linear direct current sensing system for flow monitoring in Liquid Composite Moulding , 2002 .

[23]  M. V. Bruschke,et al.  A finite element/control volume approach to mold filling in anisotropic porous media , 1990 .

[24]  Cheng-Hsien Wu,et al.  IN-PLANE PERMEABILITY MEASUREMENT AND ANALYSIS IN LIQUID COMPOSITE MOLDING , 1994 .

[25]  Naoki Takano,et al.  Microstructure-based evaluation of the influence of woven architecture on permeability by asymptotic homogenization theory , 2002 .

[26]  Joy P. Dunkers,et al.  The prediction of permeability for an epoxy/E‐glass composite using optical coherence tomographic images , 2001 .

[27]  Vaughan R Voller,et al.  PREDICTION OF FILLING TIMES OF POROUS CAVITIES , 1996 .

[28]  Suresh G. Advani,et al.  Process Modeling in Composites Manufacturing , 2004 .

[29]  Liu Yi,et al.  Study on void formation in multi-layer woven fabrics , 2004 .

[30]  Ramesh Talreja,et al.  Effects of void geometry on elastic properties of unidirectional fiber reinforced composites , 2005 .

[31]  R. McIlhagger,et al.  Investigations into various methods of liquid injection to achieve mouldings with minimum void contents and full wet out , 1998 .

[32]  Suresh G. Advani,et al.  A Method to Determine 3D Permeability of Fibrous Reinforcements , 2002 .

[33]  K. M. Chittajallu,et al.  Effect of shear, compaction and nesting on permeability of the orthogonal plain-weave fabric preforms , 2004 .

[34]  F. Trochu,et al.  Adaptive mesh generation for mould filling problems in resin transfer moulding , 2003 .

[35]  Isaac M Daniel,et al.  Determination of three-dimensional permeability of fiber preforms by the inverse parameter estimation technique , 2003 .

[36]  Fj Guild,et al.  A study of the effects of convergent flow fronts on the properties of fibre reinforced composites produced by RTM , 1998 .

[37]  Constantina Lekakou,et al.  Mathematical modelling of macro- and micro-infiltration in resin transfer moulding (RTM) , 1998 .

[38]  Wen-Bin Young,et al.  Mold filling and cure modeling of RTM and SRIM processes , 1994 .

[39]  C. Binetruy,et al.  Tow Impregnation Model and Void Formation Mechanisms during RTM , 1998 .

[40]  Suresh G. Advani,et al.  Flow and rheology in polymer composites manufacturing , 1994 .

[41]  Krishna M. Pillai,et al.  Modeling the Unsaturated Flow in Liquid Composite Molding Processes: A Review and Some Thoughts , 2004 .

[42]  Richard S. Parnas,et al.  The effect of heterogeneous porous media on mold filling in resin transfer molding , 1991 .

[43]  K. Pillai.  Governing equations for unsaturated flow through woven fiber mats. Part 1. Isothermal flows , 2002 .

[44]  R. Pitchumani,et al.  Fractal permeation characteristics of preforms used in liquid composite molding , 2000 .

[45]  Charles L. Tucker,et al.  A boundary element simulation of compression mold filling , 1988 .

[46]  Suresh G. Advani,et al.  Desirable features in mold filling simulations for Liquid Composite Molding processes , 2004 .

[47]  Kumar K. Tamma,et al.  Recent Developments Encompassing Non-Isothermal/Isothermal Liquid Composite Molding Process Modeling/Analysis: Physically Accurate, Computationally Effective, and Affordable Simulations and Validations , 1998 .

[48]  K. Pillai,et al.  Experimental Investigation of the Effect of Fiber-mat Architecture on the Unsaturated Flow in Liquid Composite Molding , 2004 .

[49]  Andrew C. Long,et al.  Analysis of the vacuum infusion moulding process: I. Analytical formulation , 2005 .