Conductivity of PBI Membranes for High-Temperature Polymer Electrolyte Fuel Cells

Polybenzimidazole (PB1) film, a candidate polymer electrolyte membrane (PEM) for high-temperature (120-200°C) fuel cells, was cast from PBI/trifluoacetyl/H 3 PO 4 solution with constant molecular weight PBI powder and various acid doping levels. Conductivity measurements on these membranes were performed using an ac method under controlled temperature and relative humidity (RH). A complete set of conductivity data for H 3 PO 4 acid-doped PBI is presented as a function of temperature (60-200°C), RH (5-30%), and acid doping level (300-600 mol %). A mechanism of conductivity is proposed for the proton migration in this PBI/acid system based on this and previous work. Proton transfer in this system appears to occur along different paths for different doping levels, RHs, and temperatures. Hydrogen bonds immobilize the anions and form a network for proton transfer by a Grotthuss mechanism. The rate of proton transfer involving H 2 O is faster, leading to higher conductivity at higher RH. The order of the rate of proton transfer between various species is H 3 PO 4 (H 2 PO 4 -)...H-O-H> H 3 PO 4 ...H 2 PO - 4 > N-H + ...H 2 PO 4 - + N-H + ...H-O-H > N-H + ...N-H. The upper limit of proton conductivity is given by the conductivity of the liquid state H 3 PO 4 .

[1]  G. Wegner,et al.  Proton transport in polybenzimidazole blended with H3PO4 or H2SO4 , 2002 .

[2]  J. Garche,et al.  New membranes for direct methanol fuel cells , 2002 .

[3]  N. Ogata,et al.  Properties of selected sulfonated polymers as proton-conducting electrolytes for polymer electrolyte fuel cells , 2002 .

[4]  Robert F. Savinell,et al.  Imidazole and 1-methyl imidazole in phosphoric acid doped polybenzimidazole, electrolyte for fuel cells , 2002 .

[5]  W. H. Li,et al.  Electrochemical deposition of Copper on patterned Cu/Ta(N)/SiO2 surfaces for super filling of sub-micron features , 2001 .

[6]  Deborah J. Jones,et al.  On the doping of sulfonated polybenzimidazole with strong bases , 2001 .

[7]  Stephen P. Miller,et al.  A thermodynamic approach to proton conductivity in acid-doped polybenzimidazole , 2001 .

[8]  Li Qingfeng,et al.  Phosphoric acid doped polybenzimidazole membranes: Physiochemical characterization and fuel cell applications , 2001 .

[9]  V. Antonucci,et al.  Sulfonated polybenzimidazole membranes — preparation and physico-chemical characterization , 2001 .

[10]  C. Kontoyannis,et al.  Development and Characterization of Acid-Doped Polybenzimidazole/Sulfonated Polysulfone Blend Polymer Electrolytes for Fuel Cells , 2001 .

[11]  C. Kontoyannis,et al.  New polymer electrolytes based on blends of sulfonated polysulfones with polybenzimidazole , 2001 .

[12]  J. Kerres.  Development of ionomer membranes for fuel cells , 2001 .

[13]  K. Sanui,et al.  Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers , 2000 .

[14]  M. Minutoli,et al.  Membranes based on phosphotungstic acid and polybenzimidazole for fuel cell application , 2000 .

[15]  O. Savadogo,et al.  Hydrogen/oxygen polymer electrolyte membrane fuel cells (PEMFCs) based on alkaline-doped polybenzimidazole (PBI) , 2000 .

[16]  V. Deimede,et al.  Miscibility Behavior of Polybenzimidazole/Sulfonated Polysulfone Blends for Use in Fuel Cell Applications , 2000 .

[17]  N. Ogata,et al.  Synthesis and proton conductivity of thermally stable polymer electrolyte: poly(benzimidazole) complexes with strong acid molecules , 2000 .

[18]  J. Kerres,et al.  Synthesis and characterization of novel acid-base polymer blends for application in membrane fuel cells , 1999 .

[19]  R. Bouchet,et al.  Proton conduction in acid doped polybenzimidazole , 1999 .

[20]  Deborah J. Jones,et al.  Investigation of the conduction properties of phosphoric and sulfuric acid doped polybenzimidazole , 1999 .

[21]  Jesse S. Wainright,et al.  High pressure electrical conductivity studies of acid doped polybenzimidazole , 1998 .

[22]  R. Savinell,et al.  Polybenzimidazoles/Phosphoric Acid Solid Polymer Electrolytes: Mechanical and Electrical Properties , 1998 .

[23]  Deborah J. Jones,et al.  Synthesis and characterisation of sulfonated polybenzimidazole: a highly conducting proton exchange polymer , 1997 .

[24]  R. Savinell,et al.  A direct methanol fuel cell using acid-doped polybenzimidazole as polymer electrolyte , 1996 .

[25]  R. Savinell,et al.  Thermal Stability of Proton Conducting Acid Doped Polybenzimidazole in Simulated Fuel Cell Environments , 1996 .

[26]  R. Savinell,et al.  Electro‐osmotic Drag Coefficient of Water and Methanol in Polymer Electrolytes at Elevated Temperatures , 1996 .

[27]  Jesse S. Wainright,et al.  A H2O2 fuel cell using acid doped polybenzimidazole as polymer electrolyte , 1996 .

[28]  Jesse S. Wainright,et al.  Acid-doped polybenzimidazoles : a new polymer electrolyte , 1995 .

[29]  R. Savinell,et al.  A Polymer Electrolyte for Operation at Temperatures up to 200°C , 1994 .

[30]  J. Wainright,et al.  AC impedance investigations of proton conduction in Nafion(sup TM) , 1993 .

[31]  Der-Tau Chin,et al.  On the conductivity of phosphoric acid electrolyte , 1989 .

[32]  R. Slade,et al.  Investigation of H+ motion in NAFION film by pulsed 1H NMR and A.C. conductivity measurements , 1983 .

[33]  T. H. Jordan,et al.  A refinement of the crystal structure of H3PO4.1/2H2O with neutron diffraction data , 1974 .

[34]  M. Litt,et al.  Synthesis and some properties of poly-(2,5-trimethylene benzimidazole) and poly-(2,5-trimethylene benzimidazole hydrochloride) , 1974 .

[35]  D. I. MacDonald,et al.  Density, electrical conductivity, and vapor pressure of concentrated phosphoric acid , 1969 .

[36]  J. P. Smith,et al.  The crystal structure of phosphoric acid hemihydrate, H3PO4.1/2H2O , 1969 .

[37]  C. E. Higgins,et al.  Dehydration of Orthophosphoric Acid , 1955 .