Comparison and analysis of energy loss and flow characteristics of T-junctions via secondary flow and entropy production

[1]  M. Realff,et al.  Reduced building energy consumption by combined indoor CO2 and H2O composition control , 2022, Applied Energy.

[2]  R. Crawford,et al.  A review of existing policy for reducing embodied energy and greenhouse gas emissions of buildings , 2022, Energy Policy.

[3]  Ling Bai,et al.  Application of entropy production theory for energy losses and other investigation in pumps and turbines: A review , 2022, Applied Energy.

[4]  Maohui Luo,et al.  Thermal comfort performance and energy-efficiency evaluation of six personal heating/cooling devices , 2022, Building and Environment.

[5]  Xin Zhang,et al.  Resistance reduction of an elbow with a guide vane based on the field synergy principle and viscous dissipation analysis , 2022, Journal of Building Engineering.

[6]  M. Hussain,et al.  Effect of surface roughness and coating alternatives of seawater pipes on energy efficiency of ships , 2022, International Journal of Energy and Water Resources.

[7]  Harvey Arellano-Garcia,et al.  Optimal design of heating and cooling pipeline networks for residential distributed energy resource systems , 2021 .

[8]  Angui Li,et al.  Study on resistance reduction in a jugular profiled bend based on entropy increase analysis and the field synergy principle , 2021 .

[9]  Angui Li,et al.  An anti-channeling flue tee with cycloidal guide vanes based on variational calculus: Subscripts: , 2021 .

[10]  R. Yao,et al.  The development of energy conservation policy of buildings in China: A comprehensive review and analysis , 2021, Journal of Building Engineering.

[11]  Angui Li,et al.  A low-resistance elbow with a bionic sawtooth guide vane in ventilation and air conditioning systems , 2021, Building Simulation.

[12]  Lingyan Li,et al.  Impact of natural and social environmental factors on building energy consumption: Based on bibliometrics , 2021 .

[13]  K. Logachev,et al.  Numerical Study of the Flow in a Symmetrical Ventilation Junction Tee with a Baffle Vane , 2021, Lecture Notes in Civil Engineering.

[14]  Sichao Tan,et al.  Numerical simulation of single and two-phase flow across 90° vertical elbows , 2021 .

[15]  K. Logachev,et al.  Numerical simulation of a z-shaped ventilation elbow and reduction of its resistance , 2020, IOP Conference Series: Materials Science and Engineering.

[16]  K. Logachev,et al.  Minimizing local drag by shaping a flanged slotted hood along the boundaries of vortex zones occurring at inlet , 2020 .

[17]  K. Logachev,et al.  A study of separated flows at inlets of flanged slotted hoods , 2020 .

[18]  Dazhuan Wu,et al.  Investigation on inner flow quality assessment of centrifugal pump based on Euler head and entropy production analysis , 2019, IOP Conference Series: Earth and Environmental Science.

[19]  M.Y. Han,et al.  Energy consumption and greenhouse gas emissions by buildings: A multi-scale perspective , 2019, Building and Environment.

[20]  Zhiwen Luo,et al.  A novel flow-guide device for uniform exhaust in a central air exhaust ventilation system , 2019, Building and Environment.

[21]  Angui Li,et al.  Resistance reduction via guide vane in dividing manifold systems with parallel pipe arrays (DMS-PPA) based on analysis of energy dissipation , 2018, Building and Environment.

[22]  Po Ting Lin,et al.  Optimal duct layout for HVAC using topology optimization , 2018 .

[23]  Angui Li,et al.  Study of the shape optimization of a tee guide vane in a ventilation and air-conditioning duct , 2018 .

[24]  V. Costanzo,et al.  The effect of passive measures on thermal comfort and energy conservation. A case study of the hot summer and cold winter climate in the Yangtze River region , 2018 .

[25]  A. Guha,et al.  Secondary motion in three-dimensional branching networks. , 2017, Physics of fluids.

[26]  Jianxin Xu,et al.  Analysis of field synergy principle and the relationship between secondary flow and heat transfer in double-layered microchannels with cavities and ribs , 2016 .

[27]  Soolyeon Cho,et al.  Energy efficiency and thermal comfort in historic buildings: A review , 2016 .

[28]  Suad Jakirlić,et al.  Comparative computational study of turbulent flow in a 90° pipe elbow , 2015 .

[29]  Heinz Herwig,et al.  The head change coefficient for branched flows: Why “losses” due to junctions can be negative , 2015 .

[30]  K. Tsujimoto,et al.  Effects of flow rate ratio on loss reduction of T-junction pipe , 2014 .

[31]  Heinz Herwig,et al.  Loss Coefficients for Periodically Unsteady Flows in Conduit Components: Illustrated for Laminar Flow in a Circular Duct and a 90 Degree Bend , 2013 .

[32]  Olivier Le Corre,et al.  Entropy production and field synergy principle in turbulent vortical flows , 2011 .

[33]  Heinz Herwig,et al.  Diffuser and Nozzle Design Optimization by Entropy Generation Minimization , 2011, Entropy.

[34]  J. Cui,et al.  Comparison of turbulence models in simulating swirling pipe flows , 2010 .

[35]  Luis Pérez-Lombard,et al.  A review on buildings energy consumption information , 2008 .

[36]  Fernando T. Pinho,et al.  Edge Effects on the Flow Characteristics in a 90deg Tee Junction , 2006 .

[37]  K. Sudo,et al.  Experimental investigation on turbulent flow in a circular-sectioned 90-degree bend , 1998 .

[38]  J. T. Haskew,et al.  Performance evaluation of vaned pipe bends in turbulent flow of liquid propellants , 1997 .

[39]  H. Itō,et al.  Pressure Losses in Vaned Elbows of a Circular Cross Section , 1966 .

[40]  G WERNER,et al.  The measurement of uncertainty , 1961, Clinical pharmacology and therapeutics.