Probing into the asymmetric nature of electromigration performance of submicron interconnect via structure

The void locations of via electromigration failures for multi-level dual damascene copper interconnect structure are highly asymmetric with respect to the current flow direction. In this work, finite element analysis is performed to investigate the nature of the asymmetries, and to identify the likely failure locations in the via structures at different test conditions. By coupling the current density, temperature and the stress fields in the analysis, and using the site with maximum atomic flux divergence as the void location site, a good correlation between the model predictions and experimental observations is obtained.

[1]  Stefan P. Hau-Riege,et al.  The Effects of the Mechanical Properties of the Confinement Material on Electromigration in Metallic Interconnects , 2000 .

[2]  Cher Ming Tan,et al.  Dynamic study of the physical processes in the intrinsic line electromigration of deep-submicron copper and aluminum interconnects , 2004 .

[3]  Hyoung Seop Kim.  Finite element analysis of torsional deformation , 2001 .

[4]  Matthew R. Begley,et al.  Delamination of Thin Films From Two-Dimensional Interface Flaws at Corners and Edges , 2001 .

[5]  Paul S. Ho,et al.  Thermal stress characteristics of Cu/oxide and Cu/low-k submicron interconnect structures , 2003 .

[6]  Kirsten Weide-Zaage,et al.  Three-Dimensional Voids Simulation in chip Metallization Structures: a Contribution to Reliability Evaluation , 2001, Microelectron. Reliab..

[7]  Andrew P. Horsfield,et al.  Electromigration of vacancies in copper , 2000 .

[8]  Ehrenfried Zschech,et al.  In situ observation of electromigration-induced void migration in dual-damascene Cu interconnect structures , 2004 .

[9]  Ahila Krishnamoorthy,et al.  Electromigration behavior of dual-damascene Cu interconnects--Structure, width, and length dependences , 2004, Microelectron. Reliab..

[10]  Yu-Lin Shen,et al.  Temperature-dependent inelastic response of passivated copper films: Experiments, analyses, and implications , 2003 .

[11]  Cher Ming Tan,et al.  Investigation of the effect of temperature and stress gradients on accelerated EM test for Cu narrow interconnects , 2006 .

[12]  Yu-Lin Shen,et al.  On the prediction of electromigration voiding using stress-based modeling , 2000 .

[13]  A. Krishnamoorthy,et al.  Current crowding effect on copper dual damascene via bottom failure for ULSI applications , 2005, IEEE Transactions on Device and Materials Reliability.

[14]  A. J. Mouthaan,et al.  Fast temperature cycling and electromigration induced thin film cracking in multilevel interconnection: experiments and modeling , 2002, Microelectron. Reliab..

[15]  P. Ho,et al.  Statistical study for electromigration reliability in dual-damascene Cu interconnects , 2004, IEEE Transactions on Device and Materials Reliability.

[16]  King-Ning Tu,et al.  Effect of current crowding on vacancy diffusion and void formation in electromigration , 2000 .

[17]  Karen Maex,et al.  Impact of current crowding on electromigration-induced mass transport , 2004 .

[18]  Valeriy Sukharev,et al.  A model for electromigration-induced degradation mechanisms in dual-inlaid copper interconnects: Effect of interface bonding strength , 2004 .

[19]  Christine S. Hau-Riege,et al.  An introduction to Cu electromigration , 2004, Microelectron. Reliab..

[20]  Baozhen Li,et al.  Line depletion electromigration characterization of Cu interconnects , 2004 .

[21]  Erik H. Anderson,et al.  Dynamical x-ray microscopy investigation of electromigration in passivated inlaid Cu interconnect structures , 2002 .

[22]  Valeriy Sukharev,et al.  Physically based simulation of electromigration-induced degradation mechanisms in dual-inlaid copper interconnects , 2005, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[23]  James R. Lloyd,et al.  Comment on “Effect of current crowding on vacancy diffusion and void formation in electromigration” [Appl. Phys. Lett. 76, 988 (2000)] , 2001 .

[24]  Deenesh Padhi,et al.  Effect of electron flow direction on model parameters of electromigration-induced failure of copper interconnects , 2003 .