Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering.
暂无分享,去创建一个
[1] Dietmar W Hutmacher,et al. Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. , 2004, Trends in biotechnology.
[2] S A Goldstein,et al. The relationship between the structural and orthogonal compressive properties of trabecular bone. , 1994, Journal of biomechanics.
[3] Dong-Woo Cho,et al. Cell adhesion and proliferation evaluation of SFF-based biodegradable scaffolds fabricated using a multi-head deposition system , 2009, Biofabrication.
[4] W. Hayes,et al. Mechanical properties of trabecular bone from the proximal femur: a quantitative CT study. , 1990, Journal of computer assisted tomography.
[5] Chee Kai Chua,et al. Characterization of SLS parts for drug delivery devices , 2001 .
[6] Benjamin Grosser,et al. Customization of Load‐Bearing Hydroxyapatite Lattice Scaffolds , 2005 .
[7] Nuno M. Neves,et al. Hydroxyapatite Reinforced Chitosan and Polyester Blends for Biomedical Applications , 2005 .
[8] Jin Man Kim,et al. In vitro and in vivo characteristics of PCL scaffolds with pore size gradient fabricated by a centrifugation method. , 2007, Biomaterials.
[9] K. Dalgarno,et al. Development of custom-built bone scaffolds using mesenchymal stem cells and apatite-wollastonite glass-ceramics. , 2007, Tissue engineering.
[10] Dietmar W. Hutmacher,et al. Comparison of the degradation of polycaprolactone and polycaprolactone–(β‐tricalcium phosphate) scaffolds in alkaline medium , 2007 .
[11] Rui L Reis,et al. Bone tissue engineering: state of the art and future trends. , 2004, Macromolecular bioscience.
[12] D. Kaplan,et al. Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.
[13] N. Gadegaard,et al. 3D polymer scaffolds for tissue engineering. , 2006, Nanomedicine.
[14] L G Griffith,et al. Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition. , 2001, Tissue engineering.
[15] Paulo Jorge Da Silva bartolo,et al. Advanced Processes to Fabricate Scaffolds for Tissue Engineering , 2008 .
[16] Andreas Lendlein,et al. Design and preparation of polymeric scaffolds for tissue engineering , 2006, Expert review of medical devices.
[17] R. Legras,et al. Physico-mechanical properties of poly (epsilon-caprolactone) for the construction of rumino-reticulum devices for grazing animals. , 1995, Biomaterials.
[18] A. L. Petrov,et al. The synthesis of a biocomposite based on nickel titanium and hydroxyapatite under selective laser sintering conditions , 2001 .
[19] Yunpeng Bi,et al. Selective laser sintering technology for customized fabrication of facial prostheses. , 2008, The Journal of prosthetic dentistry.
[20] C K Chua,et al. Fabrication of porous polymeric matrix drug delivery devices using the selective laser sintering technique , 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[21] P. Marquis,et al. Selective laser sintering of ultra high molecular weight polyethylene for clinical applications. , 2000, Journal of biomedical materials research.
[22] Zhang Tao,et al. Custom fabrication of composite tibial hemi-knee joint combining CAD/CAE/CAM techniques , 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[23] L. Griffith,et al. Tissue Engineering--Current Challenges and Expanding Opportunities , 2002, Science.
[24] R. Wehrenberg. Lactic acid polymers: strong, degradable thermoplastics , 1981 .
[25] D. Hutmacher,et al. In vitro bone engineering based on polycaprolactone and polycaprolactone–tricalcium phosphate composites , 2007 .
[26] K. Leong,et al. The design of scaffolds for use in tissue engineering. Part I. Traditional factors. , 2001, Tissue engineering.
[27] S. Howdle,et al. Laser technologies for fabricating individual implants and matrices for tissue engineering , 2007 .
[28] C K Chua,et al. Fabrication and characterization of three-dimensional poly(ether-ether-ketone)/-hydroxyapatite biocomposite scaffolds using laser sintering , 2005, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[29] C K Chua,et al. Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects , 2004, Journal of materials science. Materials in medicine.
[30] J. Kohn,et al. Physico-mechanical properties of degradable polymers used in medical applications: a comparative study. , 1991, Biomaterials.
[31] J. Vacanti,et al. Tissue engineering : Frontiers in biotechnology , 1993 .
[32] V. Goldberg,et al. The Effect of Implants Loaded with Autologous Mesenchymal Stem Cells on the Healing of Canine Segmental Bone Defects* , 1998, The Journal of bone and joint surgery. American volume.
[33] K. Leong,et al. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. , 2003, Biomaterials.
[34] Rui L. Reis,et al. Properties of melt processed chitosan and aliphatic polyester blends , 2005 .
[35] S. Lohfeld,et al. Finite element predictions compared to experimental results for the effective modulus of bone tissue engineering scaffolds fabricated by selective laser sintering , 2009, Journal of materials science. Materials in medicine.
[36] K. Hong,et al. Osteoconduction at porous hydroxyapatite with various pore configurations. , 2000, Biomaterials.
[37] J. A. Cooper,et al. Tissue engineering: orthopedic applications. , 1999, Annual review of biomedical engineering.
[38] S. Goldstein. The mechanical properties of trabecular bone: dependence on anatomic location and function. , 1987, Journal of biomechanics.
[39] F. E. Wiria,et al. Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering , 2007 .
[40] Colleen L Flanagan,et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.
[41] C K Chua,et al. Selective laser sintering of biocompatible polymers for applications in tissue engineering. , 2005, Bio-medical materials and engineering.
[42] Wilson C. Hayes,et al. Basic Orthopaedic Biomechanics , 1995 .
[43] Antonios G. Mikos,et al. Biodegradable polymer scaffolds to regenerate organs , 1995 .
[44] D D Moyle,et al. Correlation of mechanical properties of vertebral trabecular bone with equivalent mineral density as measured by computed tomography. , 1988, The Journal of bone and joint surgery. American volume.
[45] Fergal J O'Brien,et al. The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering. , 2010, Biomaterials.
[46] Suman Das,et al. Selective laser sintering process optimization for layered manufacturing of CAPA® 6501 polycaprolactone bone tissue engineering scaffolds , 2006 .
[47] A. Schindler,et al. Aliphatic polyesters. I. The degradation of poly(ϵ‐caprolactone) in vivo , 1981 .
[48] K. Leong,et al. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. , 2002, Tissue engineering.
[49] Yuki Kanno,et al. Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology , 2009, Journal of Artificial Organs.
[50] Wei Sun,et al. Computer‐aided tissue engineering: application to biomimetic modelling and design of tissue scaffolds , 2004, Biotechnology and applied biochemistry.
[51] Wei Sun,et al. Computer‐aided tissue engineering: overview, scope and challenges , 2004, Biotechnology and applied biochemistry.
[52] I Zein,et al. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.
[53] K. H. Low,et al. Characterization of microfeatures in selective laser sintered drug delivery devices , 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[54] Cato T. Laurencin,et al. Bone-Graft Substitutes: Facts, Fictions, and Applications , 2001, The Journal of bone and joint surgery. American volume.
[55] Giovanni Vozzi,et al. Blends of Poly-(ε-caprolactone) and Polysaccharides in Tissue Engineering Applications , 2005 .
[56] Stefan Lohfeld,et al. Selective laser sintering of hydroxyapatite/poly-epsilon-caprolactone scaffolds. , 2010, Acta biomaterialia.
[57] S. Hollister,et al. The interaction between bone marrow stromal cells and RGD-modified three-dimensional porous polycaprolactone scaffolds. , 2009, Biomaterials.
[58] E Berry,et al. Preliminary experience with medical applications of rapid prototyping by selective laser sintering. , 1997, Medical engineering & physics.
[59] J. Eguiazábal,et al. Structure and mechanical properties of blends of poly(ε‐caprolactone) with a poly(amino ether) , 2008 .
[60] C. X. Song,et al. Synthesis and evaluation of biodegradable block copolymers of ε‐caprolactone and DL‐lactide , 1983 .
[61] C. V. van Donkelaar,et al. Finite Element Analysis of Meniscal Anatomical 3D Scaffolds: Implications for Tissue Engineering , 2007, The open biomedical engineering journal.
[62] A. Mikos,et al. Effect of osteoblastic culture conditions on the structure of poly(DL-lactic-co-glycolic acid) foam scaffolds. , 1999, Tissue engineering.
[63] A. G. Pedroso,et al. Evaluation of the thermal and mechanical properties of poly(ε-caprolactone), low-density polyethylene, and their blends , 2004 .
[64] Toshiki Niino,et al. Avidin-biotin binding-based cell seeding and perfusion culture of liver-derived cells in a porous scaffold with a three-dimensional interconnected flow-channel network. , 2007, Biomaterials.
[65] G L Kimmel,et al. Aliphatic polyesters II. The degradation of poly (DL-lactide), poly (epsilon-caprolactone), and their copolymers in vivo. , 1981, Biomaterials.
[66] D. Hutmacher,et al. Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.
[67] Robert Langer,et al. Preparation and characterization of poly(l-lactic acid) foams , 1994 .
[68] K. Leong,et al. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.
[69] I. Zein,et al. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.
[70] Jerry Y. H. Fuh,et al. Selective Laser Sintering , 2001 .
[71] A.C.W. Lau,et al. Precision extruding deposition and characterization of cellular poly‐ε‐caprolactone tissue scaffolds , 2004 .
[72] Wei Sun,et al. Precision extruding deposition (PED) fabrication of polycaprolactone (PCL) scaffolds for bone tissue engineering , 2009, Biofabrication.
[73] Richard O C Oreffo,et al. Biocompatibility and osteogenic potential of human fetal femur-derived cells on surface selective laser sintered scaffolds. , 2009, Acta biomaterialia.
[74] D. Ingber,et al. Prevascularization of porous biodegradable polymers , 1993, Biotechnology and bioengineering.
[75] T. Einhorn. Clinical applications of recombinant human BMPs: early experience and future development. , 2003, The Journal of bone and joint surgery. American volume.
[76] E. Sachlos,et al. Making tissue engineering scaffolds work. Review: the application of solid freeform fabrication technology to the production of tissue engineering scaffolds. , 2003, European cells & materials.
[77] S Z Zhong,et al. Biomechanical characteristics of human trabecular bone. , 1997, Clinical biomechanics.
[78] Dietmar W. Hutmacher,et al. Scaffold design and fabrication technologies for engineering tissues — state of the art and future perspectives , 2001, Journal of biomaterials science. Polymer edition.
[79] Scott J. Hollister,et al. Freeform fabrication of Nylon‐6 tissue engineering scaffolds , 2003 .
[80] Minglun Fang,et al. The Mechanical Properties of Bone Tissue Engineering Scaffold Fabricating Via Selective Laser Sintering , 2007, LSMS.
[81] K. An,et al. Mechanical properties of a biodegradable bone regeneration scaffold. , 2000, Journal of biomechanical engineering.