Particle image velocimetry in a foam-like porous structure using refractive index matching: a method to characterize the hydrodynamic performance of porous structures

We present a method to measure two-dimensional velocity fields inside an artificial foam-like porous structure using particle image velocimetry and a refractive index matching technique to avoid optical distortion. The porous structure is manufactured by stereolithography with the epoxy resin WaterShed® XC 11122 as solid material, and anisole is used as refractive index-matched fluid. It was found that the direction of build-up of the stereolithographic structure plays an important role for the quality of the recorded images. The velocity fields measured in this study and the turbulent statistics derived thereof allow to characterize the hydrodynamic performance of the artificial foam-like structure and clarify the mechanisms of mixing. Results from this study compare well to results from a large eddy simulation reported by Hutter et al. (Chem Eng Sci 66:519–529, 2011b) and hence reinforce these simulations.

[1]  P. Rohr,et al.  Heat transfer in metal foams and designed porous media , 2011 .

[2]  Gaël Epely-Chauvin,et al.  Refractive-index and density matching in concentrated particle suspensions: a review , 2011 .

[3]  C. Vafidis,et al.  Flow in the coolant passages of an internal combustion engine cylinder head , 1990 .

[4]  Goodarz Ahmadi,et al.  Flow Characterization Through a Network Cell Using Particle Image Velocimetry , 2005 .

[5]  M. Stöhr,et al.  Measurement of 3D pore-scale flow in index-matched porous media , 2003 .

[6]  Thomas J. Kulp,et al.  Measurement of porous medium velocity fields and their volumetric averaging characteristics using particle tracking velocimetry , 1995 .

[7]  Adrian Zenklusen,et al.  Axial dispersion in metal foams and streamwise-periodic porous media , 2011 .

[8]  S. Kuhn,et al.  Scalar transport in a milli-scale metal foam reactor , 2010 .

[9]  Y. Hassan,et al.  Flow visualization in a pebble bed reactor experiment using PIV and refractive index matching techniques , 2008 .

[10]  Mark L Brusseau,et al.  A review of non-invasive imaging methods and applications in contaminant hydrogeology research. , 2010, Journal of contaminant hydrology.

[11]  T. Kulp,et al.  Fluorescent particle image velocimetry: application to flow measurement in refractive index-matched porous media. , 1991, Applied optics.

[12]  The influence of wavy walls on the transport of a passive scalar in turbulent flows , 2008 .

[13]  T. Aminabhavi,et al.  Density, Viscosity, Refractive Index, and Speed of Sound for Binary Mixtures of Anisole with 2-Chloroethanol, 1,4-Dioxane, Tetrachloroethylene, Tetrachloroethane, DMF, DMSO, and Diethyl Oxalate at (298.15, 303.15, and 308.15) K , 2005 .

[14]  Mehdi Rashidi,et al.  Experimental analysis of pore-scale flow and transport in porous media , 1996 .

[15]  Monica Moroni,et al.  Three‐dimensional particle tracking velocimetry studies of the transition from pore dispersion to Fickian Dispersion for homogeneous porous media , 2001 .

[16]  Simon Kuhn,et al.  Large eddy simulation of flow through a streamwise-periodic structure , 2011 .

[17]  Ryan B. Wicker,et al.  Full-field measurements of flow through a scaled metal foam replica , 2011 .

[18]  O. Reynolds.  On the dynamical theory of incompressible viscous fluids and the determination of the criterion , 1995, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[19]  R. Budwig.  Refractive index matching methods for liquid flow investigations , 1994 .