A hybrid poly(dimethylsiloxane) microsystem for on-chip whole blood filtration optimized for steroid screening

Miniaturized biochemical devices in glass, silicon and polymer materials are starting to find their way from the academic laboratories to real-life applications. However, most attention has been given to miniaturize the downstream functions of various microfluidic systems, leaving the sample introduction and preparation steps to more conventional, bulkier solutions. For point-of-care diagnostics in particular, it becomes crucial to be able to handle complex human samples in a miniaturized format.In this work, we report on a microsystem for on-chip sample preparation that is able to remove blood cells from whole blood. The hybrid system consists of a commercially available membrane filter incorporated into a poly(dimethylsiloxane) (PDMS) casted device. Membrane materials were evaluated on the bases of low nonspecific adsorption of free and protein-bound testosterone as analyte substance. The hybrid system including a hydrophilic polypropylene filter successfully removed blood cells from diluted human whole blood. Surface oxidation was sufficient to make the plasma filtrate flow through the membrane filter and the channel system by capillary force alone and thus no external pumping source was needed.

[1]  T. Bäckström,et al.  Calculation of free and bound fractions of testosterone and estradiol-17 beta to human plasma proteins at body temperature. , 1982, Journal of steroid biochemistry.

[2]  F. Wu,et al.  Endocrine aspects of anabolic steroids. , 1997, Clinical chemistry.

[3]  Ulf W. Gedde,et al.  Hydrophobicity Recovery of Polydimethylsiloxane after Exposure to Corona Discharges , 1998 .

[4]  F. Regnier,et al.  Microfabricated filters for microfluidic analytical systems. , 1999, Analytical chemistry.

[5]  P. Yager,et al.  Microfluidic Diffusion-Based Separation and Detection , 1999, Science.

[6]  Peter Enoksson,et al.  Micromachined flow-through filter-chamber for chemical reactions on beads , 2000 .

[7]  G. Whitesides,et al.  Fabrication of microfluidic systems in poly(dimethylsiloxane) , 2000, Electrophoresis.

[8]  P. Wilding,et al.  Microchip module for blood sample preparation and nucleic acid amplification reactions. , 2001, Genome research.

[9]  L. Locascio,et al.  Integrated microfluidic system enabling protein digestion, peptide separation, and protein identification. , 2001, Analytical chemistry.

[10]  G. Whitesides,et al.  Microfluidic arrays of fluid-fluid diffusional contacts as detection elements and combinatorial tools. , 2001, Analytical chemistry.

[11]  N Avdalovic,et al.  Initial study of using a laminar fluid diffusion interface for sample preparation in high-performance liquid chromatography. , 2002, Journal of chromatography. A.

[12]  Ute Drechsler,et al.  Autonomous microfluidic capillary system. , 2002, Analytical chemistry.

[13]  Jan Lichtenberg,et al.  Sample pretreatment on microfabricated devices. , 2002, Talanta.

[14]  D. Beebe,et al.  In situ fabricated porous filters for microsystems. , 2003, Lab on a chip.

[15]  Nigel Beard,et al.  Dealing with real samples: sample pre-treatment in microfluidic systems. , 2003, Lab on a chip.

[16]  J Michael Ramsey,et al.  Sample filtration, concentration, and separation integrated on microfluidic devices. , 2003, Analytical chemistry.

[17]  Paul W. Bohn,et al.  Hybrid three-dimensional nanofluidic/microfluidic devices using molecular gates , 2003 .

[18]  T. Crowley,et al.  Isolation of plasma from whole blood using planar microfilters for lab-on-a-chip applications. , 2005, Lab on a chip.

[19]  Fredrik Nikolajeff,et al.  Bioactive heparin immobilized onto microfluidic channels in poly(dimethylsiloxane) results in hydrophilic surface properties. , 2005, Colloids and surfaces. B, Biointerfaces.