Analysis of Biomass Integrated Gasification Fuel Cell Plants in Industrial CHP Applications

The gasification of biomass wastes deriving from certain industrial processes is an interesting option for cogenerating heat and power. The utilization of the syngas in a high temperature fuel cell could lead to the improvement of electrical efficiency in comparison with traditional CHP plants. In this paper the performance of various Biomass Integrated Gasification Fuel Cell (BIGFC) plants are investigated. In particular an atmospheric down-draft gasifier has been considered for syngas production. The fuel cell used for power generation is a 250 kW solid oxide fuel cell, which has been simulated through a zero-dimensional steady-state model and integrated in Aspen Plus® software for evaluating the performance of the entire plant. Various system lay-outs have been investigated to analyze the effect on plant efficiency of the following parameters: (i) gasification air pre-heating; (ii) use of 90% pure oxygen for gasification; (iii) use of enriched air (55% O2 ) for gasification; (iv) recirculation of anodic gas flow; (v) installation of a SOFC/GT hybrid cycle for power production. BIGFC plants show an electrical efficiency in the range 20–27%, and a thermal efficiency of 39–59%. If a SOFC/GT hybrid cycle is installed electrical efficiency grows up to 39%.Copyright © 2006 by ASME

[1]  André Faaij,et al.  Future prospects for production of methanol and hydrogen from biomass , 2002 .

[2]  Nigel P. Brandon,et al.  Modelling system efficiencies and costs of two biomass-fuelled SOFC systems , 2004 .

[3]  Stefano Campanari,et al.  Thermodynamic model and parametric analysis of a tubular SOFC module , 2001 .

[4]  S. Singhal.  Advances in solid oxide fuel cell technology , 2000 .

[5]  Y. Tian,et al.  Modelling for part-load operation of solid oxide fuel cell–gas turbine hybrid power plant , 2003 .

[6]  R. Burzacca,et al.  Energy recovery from industrial waste of a confectionery plant by means of BIGFC plant , 2004 .

[7]  Lars Sjunnesson,et al.  Combined solid oxide fuel cell and gas turbine systems for efficient power and heat generation , 2000 .

[8]  H. Ho,et al.  Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant , 2002 .

[9]  A. J. Toft,et al.  A techno-economic comparison of power production by biomass fast pyrolysis with gasification and combustion , 2002 .

[10]  A. Faaij,et al.  Efficiency and economy of wood-fired biomass energy systems in relation to scale regarding heat and power generation using combustion and gasification technologies , 2001 .

[11]  Giacomo M. Bisio,et al.  Thermodynamics applied to oxygen enrichment of combustion air , 2002 .

[12]  A. Bridgwater.  The technical and economic feasibility of biomass gasification for power generation , 1995 .

[13]  S. P. Singh,et al.  Stoichiometric, mass, energy and exergy balance analysis of countercurrent fixed-bed gasification of post-consumer residues , 2004 .

[14]  Aristide F. Massardo,et al.  Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a micro gas turbine , 2001 .

[15]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[16]  S. Campanari,et al.  Definition and sensitivity analysis of a finite volume SOFC model for a tubular cell geometry , 2004 .

[17]  H. Ho,et al.  Multi-level modeling of SOFC–gas turbine hybrid system , 2003 .

[18]  S. Chan,et al.  Modeling of a catalytic autothermal methane reformer for fuel cell applications , 2004 .

[19]  Nigel M. Sammes,et al.  SOFC mathematic model for systems simulations. Part one: from a micro-detailed to macro-black-box model , 2005 .

[20]  S. Channiwala,et al.  A UNIFIED CORRELATION FOR ESTIMATING HHV OF SOLID, LIQUID AND GASEOUS FUELS , 2002 .

[21]  T. Nussbaumer,et al.  Gas cleaning for IC engine applications from fixed bed biomass gasification , 1999 .