A fibre-optic catheter-tip force sensor with MRI compatibility: A feasibility study

This paper presents the development of a low-cost, Magnetic Resonance Imaging (MRI) compatible fibre-optic sensor for integration with catheters allowing the detection of contact forces between blood vessel walls and the catheter tip. Three plastic optical-fibres are aligned inside a plastic catheter in a circular pattern. A reflector is attached to a separate small part of the catheter tip, which is connected with a small deformable material to the aligned optical-fibres. In this manner a force at the catheter tip leads to a deformation of the elastic material and thus a modulation of the light yields, this is sent and received through the optical-fibres. An electronic circuit amplifies the retrieved light signal and the output voltage is used to classify the forces on the tip. The materials used are of the shelf and have a low magnetic susceptibility making this sensor fully MRI-compatible and inexpensive. Preliminary, experimental results demonstrated good force linearity in static loading and unloading conditions. The sensor was also tested in an artificial blood artery showing good dynamic response.

[1]  H. Lambert,et al.  Novel Contact Force Sensor Incorporated in Irrigated Radiofrequency Ablation Catheter Predicts Lesion Size and Incidence of Steam Pop and Thrombus , 2008, Circulation. Arrhythmia and electrophysiology.

[2]  D. Hill,et al.  Cardiac catheterisation guided by MRI in children and adults with congenital heart disease , 2003, The Lancet.

[3]  L.D. Seneviratne,et al.  State-of-the-Art in Force and Tactile Sensing for Minimally Invasive Surgery , 2008, IEEE Sensors Journal.

[4]  Dominiek Reynaerts,et al.  TACTILE SENSING TECHNOLOGY FOR ROBOT ASSISTED MINIMALLY INVASIVE SURGERY , 2007 .

[5]  Miss A.O. Penney.  (b) , 1974, The New Yale Book of Quotations.

[6]  R. Riener,et al.  Review on MR-Compatible Robotic Systems , 2006, The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006..

[7]  Volkmar Schulz,et al.  Transmission line for improved RF safety of interventional devices , 2005, Magnetic resonance in medicine.

[8]  Y. Haga,et al.  MICROMACHINED 125μm DIAMETER ULTRA MINIATURE FIBER-OPTIC PRESSURE SENSOR FOR CATHETER , 2000 .

[9]  Benedetto Allotta,et al.  Robotics for medical applications , 1996, IEEE Robotics Autom. Mag..

[10]  Tobias Schaeffter,et al.  In vivo safe catheter visualization and slice tracking using an optically detunable resonant marker , 2004, Magnetic resonance in medicine.

[11]  G. S. Guthart,et al.  The Intuitive Telesurgery System , 2000 .

[12]  Shuxiang Guo,et al.  Realization of a Catheter Driving Mechanism with Micro tactile sensor for Intravascular Neurosurgery , 2006, 2006 IEEE International Conference on Robotics and Biomimetics.

[13]  John Kenneth Salisbury,et al.  The Intuitive/sup TM/ telesurgery system: overview and application , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[14]  Nicholas S. Peters,et al.  Experience of robotic catheter ablation in humans using a novel remotely steerable catheter sheath , 2008, Journal of Interventional Cardiac Electrophysiology.

[15]  Phillip Moore,et al.  MRI‐guided congenital cardiac catheterization and intervention: The future? , 2005, Catheterization and cardiovascular interventions : official journal of the Society for Cardiac Angiography & Interventions.