Three-dimensional interconnect with excellent moisture resistance for low-cost MMICs

The moisture resistance of three-dimensional (3-D) interconnects using organic insulator films and Au metals has been investigated to ascertain the feasibility of housing monolithic-microwave integrated circuits with these interconnects in inexpensive nonhermetic packages. By comparing polyimide and benzocyclobutene (BCB) for organic insulator films, it was found that although polyimide has higher moisture absorption than BCB, it has a greater moisture resistance. This suggests that moisture absorption is not the dominant factor in moisture resistance and that BCB has higher water permeability than polyimide. As an adhesion layer between Au metal and insulator film, W and WN have better moisture resistance than WSi and WSiN; adhesion layer compositions containing Si oxidize easily. Further, the metal patterning method has an effect on moisture resistance in terms of leakage current. Reactive ion etching (RIE) with SF/sub 6/ gas is necessary in order to completely remove the metal atom residue left after ion milling with Ar gas. An interconnect using polyimide insulator film, W or WN adhesion metal, and metal patterned by ion milling and RIE, did not fail in terms of contact resistance and leakage current under stress of 85/spl deg/C and 85% relative humidity with a bias for 1000 h.

[1]  A. Lin,et al.  Evaluation of polyimides as dielectric materials for multichip packages with multilevel interconnection structure , 1989, Proceedings., 39th Electronic Components Conference.

[2]  A. Saiki,et al.  A New Transistor with Two‐Level Metal Electrodes , 1977 .

[3]  P. Garrou,et al.  Benzocyclobutene (BCB) Dielectrics for the High Density, Thin Film Multichip Modules Fabrication of , 1990 .

[4]  Haksoo Han,et al.  Water diffusion studies in polyimide thin films , 2001 .

[5]  Huma Ashraf,et al.  Advanced silicon etching using high-density plasmas , 1995, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[6]  Kiyomitsu Onodera,et al.  Three-Dimensional MMIC Interconnect Process using Photosensitive BCB and STO Capacitors , 1998, 1998 28th European Microwave Conference.

[7]  H. Kita,et al.  Sorption and diffusion of water vapor in polyimide films , 1992 .

[8]  E. Sacher,et al.  Water permeation of polymer films. I. Polyimide , 1979 .

[9]  J.D. LeGrange,et al.  Enhanced moisture protection of electronic devices by ultra-thin polyimide films , 1989, Proceedings., 39th Electronic Components Conference.

[10]  Kang-Wook Lee,et al.  Sorption of water and organic solutes in polyimide films and its effects on dielectric properties , 1993 .

[11]  K. Yamasaki,et al.  Novel Fabrication Technology for Ultra-Compact Three-Dimensional MMICs , 1997, 27th European Solid-State Device Research Conference.

[12]  Ichihiko Toyoda,et al.  Quick Development of Multifunctional MMICs by Using Three-Dimensional Masterslice MMIC Technology , 1999 .

[13]  Stephen D. Senturia,et al.  Moisture diffusion in poltimide films in integrated circuits , 1985 .

[14]  S. Greenbaum,et al.  Dielectric relaxation and deuteron NMR of water in polyimide films , 1989 .

[15]  Mau-Chung Frank Chang,et al.  Millimeter-wave silicon MMIC interconnect and coupler using multilayer polyimide technology , 2000 .

[16]  Philip E. Garrou,et al.  Benzocyclobutene (BCB) dielectrics for the fabrication of high density, thin film multichip modules , 1991 .

[17]  I. Toyoda,et al.  A compact V-band 3DMMIC single-chip down-converter using photosensitive BCB dielectric film , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[18]  A.J.G. Strandjord,et al.  Stress-buffer and passivation processes for Si and GaAs IC's and passive components using photosensitive BCB: process technology and reliability data , 1999 .

[19]  J. Coburn,et al.  Structural Effects on the Transport of Water in Polyimides , 1994 .

[20]  Denice D. Denton,et al.  Moisture Uptake of Bisbenzocyclobutene (BCB) Films for Electronic Packaging Applications , 1990 .

[21]  T. Tokumitsu,et al.  Highly integrated three-dimensional MMIC technology applied to novel masterslice GaAs- and Si-MMICs , 1997 .

[22]  I. Toyoda,et al.  Three-dimensional passive circuit technology for ultra-compact MMICs , 1995, Proceedings of 1995 IEEE MTT-S International Microwave Symposium.

[23]  M. Best,et al.  SOLUBILITY OF WATER IN POLYIMIDES : QUARTZ CRYSTAL MICROBALANCE MEASUREMENTS , 1991 .

[24]  Kenjiro Nishikawa,et al.  Three-dimensional MMIC technology for low-cost millimeter-wave MMICs , 2001 .

[26]  P. Garrou,et al.  A photosensitive-BCB on laminate technology (MCM-LD) , 1994, 1994 Proceedings. 44th Electronic Components and Technology Conference.

[27]  G. Arlt,et al.  Dielectric effects of moisture in polyimide , 1989 .

[28]  Wen-Li Wu,et al.  Interface effects on moisture absorption in ultrathin polyimide films , 1998 .