Modelling the arterial wall by finite elements.

The mechanical behaviour of the arterial wall was determined theoretically utilizing some parameters of blood flow measured in vivo. Continuous experimental measurements of pressure and diameter were recorded in anesthetized dogs on the thoracic ascending and midabdominal aorta. The pressure was measured by using a catheter, and the diameter firstly, at the same site, by a plethysmograph with mercury gauge and secondly, by a sonomicrometer with ferroelectric ceramic transducers. The unstressed radius and thickness were measured at the end of each experiment in situ. Considering that the viscous component is not important relatively to the nonlinear component of the elasticity and utilizing several equations for Young modulus calculation (thick and thin wall circular cylindrical tube formulas and Bergel's equation) the following values were obtained for this parameter: 0.6 MPa-2 MPa in midabdominal aorta and 2 MPa-6.5 MPa in thoracic ascending aorta. The behaviour of the aorta wall was modelled considering an elastic law and using the finite element program "Lagamine" working in large deformations. The discretized equilibrium equations are non-linear and a unique axi-symmetric, iso-parametric element of 1 cm in length with 8 knots was used for this bi-dimensional problem. The theoretical estimation of radius vessel, utilizing a constant 5 MPa Young modulus and also a variable one, are in good agreement with the experimental results, showing that this finite element model can be applied to study mechanical properties of the arteries in physiological and pathological conditions.

[1]  D. L. Fry.  Acute Vascular Endothelial Changes Associated with Increased Blood Velocity Gradients , 1968, Circulation research.

[2]  R. Kormos,et al.  Effect of variations in pressure and flow on the geometry of isolated canine carotid arteries. , 1987, Journal of biomechanics.

[3]  J. Hoffmeister,et al.  Biomechanics of the arterial wall under simulated flow conditions. , 1988, Journal of biomechanics.

[4]  C. J. Ruissen,et al.  Transcutaneous detection of relative changes in artery diameter. , 1985, Ultrasound in medicine & biology.

[5]  Y. Fung,et al.  Biomechanics: Mechanical Properties of Living Tissues , 1981 .

[6]  H. Yasuda,et al.  Arteriosclerotic change in the human abdominal aorta in vivo in relation to coronary heart disease and risk factors. , 1988, Atherosclerosis.

[7]  R S Reneman,et al.  Carotid artery wall properties in normotensive and borderline hypertensive subjects of various ages. , 1988, Ultrasound in medicine & biology.

[8]  M. Sato.  [Mechanical properties of living tissues]. , 1986, Iyo denshi to seitai kogaku. Japanese journal of medical electronics and biological engineering.

[9]  M. Sharma.  Viscoelastic behavior of conduit arteries. , 1974, Biorheology.

[10]  R. N. Vaishnav,et al.  Residual stress and strain in aortic segments. , 1987, Journal of biomechanics.

[11]  M. Anliker,et al.  Biomechanics Its Foundations And Objectives , 1972 .

[12]  R S Reneman,et al.  Age-related changes in carotid artery wall properties in men. , 1986, Ultrasound in medicine & biology.

[13]  Segmental aortic wall stiffness from intravascular ultrasound at normal and subnormal aortic pressure in pigs. , 1991, Acta physiologica Scandinavica.

[14]  H. Yasuda,et al.  In vivo viscoelastic behavior in the human aorta. , 1990, Circulation research.

[15]  M Anliker,et al.  Dispersion and Attenuation of Small Artificial Pressure Waves in the Canine Aorta , 1968, Circulation Research.

[16]  A model of the arterial wall. , 1973, Journal of biomechanics.

[17]  M. G. Taylor,et al.  Alterations with Age in the Viscoelastic Properties of Human Arterial Walls , 1966, Circulation research.

[18]  J. Manak.  The two-dimensional in vitro passive stress-strain elasticity relationships for the steer thoracic aorta blood vessel tissue. , 1980, Journal of biomechanics.

[19]  D. Bergel,et al.  The dynamic elastic properties of the arterial wall , 1961, The Journal of physiology.