MODELLING THE IMPACT BEHAVIOUR OF SANDWICH STRUCTURES WITH FOLDED COMPOSITE CORES

Abstract The European aircraft industry has strong interest in novel structural concepts for future aircraft fuselage with lower fabrication costs and high performance. A critical safety issue for the design of aircraft structure is vulnerability and damage tolerance due to foreign object impact. This paper focuses on the improvement of modelling techniques for foldcore sandwich structures with composite skins under low velocity impact. A new modelling approach for the foldcore cell wall material – aramid paper – is presented, which considers the aramid papers inhomogeneous nature in the thickness direction. In combination with in-ply continuum damage mechanics and a cohesive delamination interface for the modelling of the composite surface skin the proposed modelling approach is used to reproduce drop tower impact tests performed at various impact velocities. Results and interpretation of the numerical and experimental work are presented. The strengths and weaknesses of the presented modelling approach are discussed and evaluated.

[1]  Reza Vaziri,et al.  A physically based continuum damage mechanics model for thin laminated composite structures , 2003 .

[2]  Alastair Johnson,et al.  Mechanical tests for foldcore base material properties , 2009 .

[3]  Alastair Johnson,et al.  Influence of delamination on impact damage in composite structures , 2006 .

[4]  C. Santiuste,et al.  Modelling of composite sandwich structures with honeycomb core subjected to high-velocity impact , 2010 .

[5]  A. K. Pickett,et al.  Delamination testing and modelling for composite crash simulation , 2006 .

[6]  Laurent Daudeville,et al.  A damage mechanics tool for laminate delamination , 1993 .

[7]  S. Heimbs.  Foldcore Sandwich Structures and Their Impact Behaviour: An Overview , 2013 .

[8]  Emmanuel Baranger,et al.  Modelling of the Behaviour of Aramid Folded Cores Up to Global Crushing , 2011 .

[9]  Emmanuel Baranger,et al.  Numerical modeling of the geometrical defects of an origami-like sandwich core , 2011 .

[10]  Alastair Johnson,et al.  Analysis of Crushing Response of Composite Crashworthy Structures , 2013, Applied Composite Materials.

[11]  Alastair Johnson,et al.  Determination of delamination damage in composites under impact loads , 2008 .

[12]  Pierre Ladevèze,et al.  Damage modelling of the elementary ply for laminated composites , 1992 .

[13]  L. Kärger,et al.  Stiffness and failure behaviour of folded sandwich cores under combined transverse shear and compression , 2007 .

[14]  K. Sab,et al.  Homogenization of thick periodic plates: Application of the Bending-Gradient plate theory to a folded core sandwich panel , 2012 .

[15]  Michele Meo,et al.  Numerical simulations of low-velocity impact on an aircraft sandwich panel , 2003 .

[16]  Sebastian Kilchert.  Nonlinear finite element modelling of degradation and failure in folded core composite sandwich structures , 2013 .

[17]  Alastair Johnson,et al.  Computational methods for predicting impact damage in composite structures , 2001 .

[18]  Michelle S. Hoo Fatt,et al.  A wave propagation model for the high velocity impact response of a composite sandwich panel , 2010 .

[19]  A. K. Pickett,et al.  A fracture damaging law suitable for anisotropic short fibre/matrix materials in an explicit finite element code , 1990 .

[20]  Andrew J. Gunnion,et al.  Investigation into laminate design of open carbon–fibre/epoxy sections by quasi–static and dynamic crushing , 2011 .

[21]  Alastair Johnson,et al.  Prediction of impact damage on sandwich composite panels , 2005 .

[22]  O. Allix,et al.  Interlaminar interface modelling for the prediction of delamination , 1992 .

[23]  Alastair Johnson,et al.  Numerical modelling of honeycomb core crush behaviour , 2008 .

[24]  N. Gupta,et al.  Experimental and numerical investigations of residual strength after impact of sandwich panels , 2012 .

[25]  Alastair Johnson,et al.  Sandwich structures with textile-reinforced composite foldcores under impact loads , 2010 .

[26]  Alastair Johnson,et al.  Experimental and Numerical Analysis of Composite Folded Sandwich Core Structures Under Compression , 2007 .

[27]  Murray L. Scott,et al.  Simulation of impact on sandwich structures , 2005 .

[28]  Alastair Johnson,et al.  Modelling impact damage in composite structural elements , 2005 .

[29]  Srinivasan Sridharan,et al.  Delamination Behaviour of Composites , 2008 .

[30]  T N Bitzer,et al.  Honeycomb Technology: Materials, Design, Manufacturing, Applications and Testing , 1997 .