Additive Manufacturing for Tissue Engineering

[1]  Dong-Woo Cho,et al.  Development of nano- and microscale composite 3D scaffolds using PPF/DEF-HA and micro-stereolithography , 2009 .

[2]  Ashkan Shafiee,et al.  Tissue Engineering: Toward a New Era of Medicine. , 2017, Annual review of medicine.

[3]  Ian Wimpenny,et al.  The application of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) scaffolds for tendon repair in the rat model. , 2013, Biomaterials.

[4]  Anja Lode,et al.  Alginate/nanohydroxyapatite scaffolds with designed core/shell structures fabricated by 3D plotting and in situ mineralization for bone tissue engineering. , 2015, ACS applied materials & interfaces.

[5]  Nan Ma,et al.  Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration. , 2011, Biomaterials.

[6]  P. Bloomfield.  Choice of heart valve prosthesis , 2002, Heart.

[7]  Anthony Atala,et al.  Printing Technologies for Medical Applications. , 2016, Trends in molecular medicine.

[8]  James J. Yoo,et al.  Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology. , 2013, Biomaterials.

[9]  Jintamai Suwanprateeb,et al.  Development of porous powder printed high density polyethylene for personalized bone implants , 2012, Journal of Porous Materials.

[10]  Stefan Lohfeld,et al.  Interaction of cell culture with composition effects on the mechanical properties of polycaprolactone-hydroxyapatite scaffolds fabricated via selective laser sintering (SLS) , 2012 .

[11]  Anthony Atala,et al.  A 3D bioprinted complex structure for engineering the muscle–tendon unit , 2015, Biofabrication.

[12]  C. V. van Blitterswijk,et al.  Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique. , 2004, Biomaterials.

[13]  R. Cameron,et al.  Synthetic collagen fascicles for the regeneration of tendon tissue. , 2012, Acta biomaterialia.

[14]  Henrique A. Almeida,et al.  Additive manufacturing techniques for scaffold-based cartilage tissue engineering , 2013 .

[15]  Ashkan Shafiee,et al.  Fabrication of organic solar cells based on a blend of poly (3-octylthiophene-2, 5-diyl) and fullerene derivative using inkjet printing technique , 2009, International Conference on Smart Materials and Nanotechnology in Engineering.

[16]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[17]  Gabor Forgacs,et al.  Post-deposition bioink self-assembly: a quantitative study , 2015, Biofabrication.

[18]  Krishnendu Roy,et al.  A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds. , 2006, Journal of biomedical materials research. Part A.

[19]  D. Hutmacher,et al.  In vitro bone engineering based on polycaprolactone and polycaprolactone–tricalcium phosphate composites , 2007 .

[20]  Ibrahim T. Ozbolat,et al.  Bioprinting Toward Organ Fabrication: Challenges and Future Trends , 2013, IEEE Transactions on Biomedical Engineering.

[21]  L. Murr,et al.  Compression deformation behavior of Ti-6Al-4V alloy with cellular structures fabricated by electron beam melting. , 2012, Journal of the mechanical behavior of biomedical materials.

[22]  Amir A. Zadpoor,et al.  Additive Manufacturing of Biomaterials, Tissues, and Organs , 2016, Annals of Biomedical Engineering.

[23]  J. Suwanprateeb,et al.  Three-dimensional printing of porous polyethylene structure using water-based binders. , 2006, Journal of biomedical materials research. Part B, Applied biomaterials.

[24]  Ashkan Shafiee,et al.  Structural, optical and electrical properties of fluorine doped tin oxide thin films deposited using inkjet printing technique , 2011 .

[25]  Peter F. M. Choong,et al.  3D Bioprinting of Cartilage for Orthopedic Surgeons: Reading between the Lines , 2015, Front. Surg..

[26]  Joseph Cesarano,et al.  Robotic deposition of model hydroxyapatite scaffolds with multiple architectures and multiscale porosity for bone tissue engineering. , 2007, Journal of biomedical materials research. Part A.

[27]  Eduardo Saiz,et al.  Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration. , 2011, Acta biomaterialia.

[28]  I. Silver,et al.  A long-term in vivo investigation on the effects of xenogenous based, electrospun, collagen implants on the healing of experimentally-induced large tendon defects. , 2013, Journal of musculoskeletal & neuronal interactions.

[29]  Dong-Woo Cho,et al.  Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification , 2009, Journal of materials science. Materials in medicine.

[30]  A. A. Zadpoor,et al.  Effect of Alkali-Acid-Heat Chemical Surface Treatment on Electron Beam Melted Porous Titanium and Its Apatite Forming Ability , 2015, Materials.

[31]  GeunHyung Kim,et al.  Cells (MC3T3-E1)-laden alginate scaffolds fabricated by a modified solid-freeform fabrication process supplemented with an aerosol spraying. , 2012, Biomacromolecules.

[32]  D. Barritault,et al.  Growth factors in skeletal muscle regeneration. , 1996, Cytokine & growth factor reviews.

[33]  A. Singh,et al.  Ti based biomaterials, the ultimate choice for orthopaedic implants – A review , 2009 .

[34]  N. Resnina,et al.  Influence of chemical composition and pre-heating temperature on the structure and martensitic transformation in porous TiNi-based shape memory alloys, produced by self-propagating high-temperature synthesis , 2013 .

[35]  Jos Malda,et al.  A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering , 2011 .

[36]  S. Teoh,et al.  Knitted poly-lactide-co-glycolide scaffold loaded with bone marrow stromal cells in repair and regeneration of rabbit Achilles tendon. , 2003, Tissue engineering.

[37]  Dietmar W Hutmacher,et al.  Dynamics of in vitro polymer degradation of polycaprolactone-based scaffolds: accelerated versus simulated physiological conditions , 2008, Biomedical materials.

[38]  Chien-Tzung Chen,et al.  Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering. , 2014, Materials science & engineering. C, Materials for biological applications.

[39]  Emeka Nkenke,et al.  In vivo performance of selective electron beam-melted Ti-6Al-4V structures. , 2010, Journal of biomedical materials research. Part A.

[40]  Jukka Seppälä,et al.  Porous 3D modeled scaffolds of bioactive glass and photocrosslinkable poly(ε-caprolactone) by stereolithography , 2013 .

[41]  Ashkan Shafiee,et al.  Preparation Nanostructure Thin Films of Fluorine Doped Tin Oxide by Inkjet Printing Technique , 2010 .

[42]  Harrie Weinans,et al.  Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats , 2013, PloS one.

[43]  S. Hsu,et al.  Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen , 2009, Biomedical microdevices.

[44]  Shivakumar Raman,et al.  Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). , 2010, Journal of the mechanical behavior of biomedical materials.

[45]  L. Murr,et al.  Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting. , 2011, Journal of the mechanical behavior of biomedical materials.

[46]  N. Orhan,et al.  Investigation of combustion channel in fabrication of porous NiTi alloy implants by SHS , 2012 .

[47]  Zhongmin Jin,et al.  Application of 3D printed customized external fixator in fracture reduction. , 2015, Injury.

[48]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[49]  Ian Gibson,et al.  Composite PLDLLA/TCP Scaffolds for Bone Engineering: Mechanical and In Vitro Evaluations , 2009 .

[50]  Shan-hui Hsu,et al.  Chondrogenesis from human placenta-derived mesenchymal stem cells in three-dimensional scaffolds for cartilage tissue engineering. , 2011, Tissue engineering. Part A.

[51]  Xiaofeng Cui,et al.  Application of inkjet printing to tissue engineering , 2006, Biotechnology journal.

[52]  A. Bandyopadhyay,et al.  Bone tissue engineering using 3D printing , 2013 .

[53]  Vahid Hosseini,et al.  Skeletal Muscle Tissue Engineering: Methods to Form Skeletal Myotubes and Their Applications , 2014 .

[54]  Ung-il Chung,et al.  Tailor-made tricalcium phosphate bone implant directly fabricated by a three-dimensional ink-jet printer , 2006, Journal of Artificial Organs.

[55]  Eric D. Miller,et al.  Inkjet-based biopatterning of bone morphogenetic protein-2 to spatially control calvarial bone formation. , 2010, Tissue engineering. Part A.

[56]  Masatoshi Sato,et al.  Reconstruction of rabbit Achilles tendon with three bioabsorbable materials: histological and biomechanical studies , 2000, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[57]  L. Niklason,et al.  Scaffold-free vascular tissue engineering using bioprinting. , 2009, Biomaterials.

[58]  Siew Lok Toh,et al.  A bFGF-releasing silk/PLGA-based biohybrid scaffold for ligament/tendon tissue engineering using mesenchymal progenitor cells. , 2010, Biomaterials.

[59]  W. Suwanpreuk,et al.  Fabrication of bioactive hydroxyapatite/bis-GMA based composite via three dimensional printing , 2008, Journal of materials science. Materials in medicine.

[60]  Anand Doraiswamy,et al.  Two-dimensional differential adherence and alignment of C2C12 myoblasts , 2005 .

[61]  Zhongmin Jin,et al.  Design and fabrication of a novel porous implant with pre-set channels based on ceramic stereolithography for vascular implantation , 2011, Biofabrication.

[62]  Rui L Reis,et al.  Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency. , 2011, Acta biomaterialia.

[63]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[64]  Jung-Woog Shin,et al.  Fabrication and characterization of novel nano- and micro-HA/PCL composite scaffolds using a modified rapid prototyping process. , 2008, Journal of biomedical materials research. Part A.

[65]  Z. Xia,et al.  In vitro two‐dimensional and three‐dimensional tenocyte culture for tendon tissue engineering , 2016, Journal of tissue engineering and regenerative medicine.

[66]  R. Wyrwa,et al.  Two‐Photon Polymerization of Biocompatible Photopolymers for Microstructured 3D Biointerfaces , 2011 .

[67]  Richard O C Oreffo,et al.  Biocompatibility and osteogenic potential of human fetal femur-derived cells on surface selective laser sintered scaffolds. , 2009, Acta biomaterialia.

[68]  Dietmar W. Hutmacher,et al.  Comparison of the degradation of polycaprolactone and polycaprolactone–(β‐tricalcium phosphate) scaffolds in alkaline medium , 2007 .

[69]  A. A. Zadpoor,et al.  How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials? , 2017, Journal of the mechanical behavior of biomedical materials.

[70]  Benjamin Chu,et al.  Functional electrospun nanofibrous scaffolds for biomedical applications. , 2007, Advanced drug delivery reviews.

[71]  Morteza Oghbaei,et al.  Microwave versus Conventional Sintering: A Review of Fundamentals, Advantages and Applications , 2010 .

[72]  James J. Yoo,et al.  Tissue-engineered autologous bladders for patients needing cystoplasty , 2006, The Lancet.

[73]  G. Vunjak‐Novakovic,et al.  Concise Review: Personalized Human Bone Grafts for Reconstructing Head and Face , 2012, Stem cells translational medicine.

[74]  A. Schambach,et al.  Skin tissue generation by laser cell printing , 2012, Biotechnology and bioengineering.

[75]  George J Christ,et al.  The influence of electrospun aligned poly(epsilon-caprolactone)/collagen nanofiber meshes on the formation of self-aligned skeletal muscle myotubes. , 2008, Biomaterials.

[76]  Fernando Guiberteau,et al.  Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration. , 2010, Acta biomaterialia.

[77]  S. Hollister.  Porous scaffold design for tissue engineering , 2005, Nature materials.

[78]  D. Hutmacher,et al.  Scaffold development using 3D printing with a starch-based polymer , 2002 .

[79]  Robert Liska,et al.  Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing , 2009 .

[80]  C K Chua,et al.  Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds. , 2011, Acta biomaterialia.

[81]  J. Bono,et al.  Custom and modular components in primary total hip replacement. , 1997, Clinical orthopaedics and related research.

[82]  Xiaofeng Cui,et al.  Thermal inkjet printing in tissue engineering and regenerative medicine. , 2012, Recent patents on drug delivery & formulation.

[83]  S. Hsu,et al.  Synthesis and 3D Printing of Biodegradable Polyurethane Elastomer by a Water‐Based Process for Cartilage Tissue Engineering Applications , 2014, Advanced healthcare materials.

[84]  Wei Sun,et al.  Accelerated differentiation of osteoblast cells on polycaprolactone scaffolds driven by a combined effect of protein coating and plasma modification , 2010, Biofabrication.

[85]  Baolin Guo,et al.  Nanofiber Yarn/Hydrogel Core-Shell Scaffolds Mimicking Native Skeletal Muscle Tissue for Guiding 3D Myoblast Alignment, Elongation, and Differentiation. , 2015, ACS nano.

[86]  M. Yahaya,et al.  Fabrication of organic solar cells based on a blend of donor-acceptor molecules by inkjet printing technique , 2008, 2008 IEEE International Conference on Semiconductor Electronics.

[87]  Guanglei Xiong,et al.  Current progress in 3D printing for cardiovascular tissue engineering , 2015, Biomedical materials.

[88]  Vamsi Krishna Balla,et al.  Microwave‐sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering , 2013, Journal of tissue engineering and regenerative medicine.

[89]  Amit Bandyopadhyay,et al.  Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling , 2003 .

[90]  Brendon M. Baker,et al.  Rapid casting of patterned vascular networks for perfusable engineered 3D tissues , 2012, Nature materials.

[91]  A. Jakus,et al.  In situ forming collagen-hyaluronic acid membrane structures: mechanism of self-assembly and applications in regenerative medicine. , 2013, Acta biomaterialia.

[92]  Eric Farrell,et al.  Selective laser melting porous metallic implants with immobilized silver nanoparticles kill and prevent biofilm formation by methicillin-resistant Staphylococcus aureus. , 2017, Biomaterials.

[93]  A. Khademhosseini,et al.  Modular Tissue Engineering: Engineering Biological Tissues from the Bottom Up. , 2009, Soft matter.

[94]  F. E. Wiria,et al.  Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering , 2007 .

[95]  Stefan Lohfeld,et al.  Selective laser sintering of hydroxyapatite/poly-epsilon-caprolactone scaffolds. , 2010, Acta biomaterialia.

[96]  Wouter J A Dhert,et al.  Prolonged presence of VEGF promotes vascularization in 3D bioprinted scaffolds with defined architecture. , 2014, Journal of controlled release : official journal of the Controlled Release Society.

[97]  Yanen Wang,et al.  Electron Beam Melting Fabrication of Porous Ti6Al4V Scaffolds: Cytocompatibility and Osteogenesis , 2015 .

[98]  Guangdong Zhou,et al.  In vivo tendon engineering with skeletal muscle derived cells in a mouse model. , 2012, Biomaterials.

[99]  Jorge Vicente Lopes da Silva,et al.  3D Printing of Poly(3‐hydroxybutyrate) Porous Structures Using Selective Laser Sintering , 2012 .

[100]  Robert Liska,et al.  Processing of 45S5 Bioglass® by lithography-based additive manufacturing , 2012 .

[101]  L. Murr,et al.  Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[102]  J. Lewis,et al.  Omnidirectional Printing of 3D Microvascular Networks , 2011, Advanced materials.

[103]  D. Cho,et al.  Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system , 2012 .

[104]  Barbara Mazzolai,et al.  The Osteoprint: a bioinspired two-photon polymerized 3-D structure for the enhancement of bone-like cell differentiation. , 2014, Acta biomaterialia.

[105]  Malcolm N. Cooke,et al.  Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth. , 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

[106]  Chikara Ohtsuki,et al.  Biological evaluation of an apatite-mullite glass-ceramic produced via selective laser sintering. , 2007, Acta biomaterialia.

[107]  Michael J Yaszemski,et al.  Poly(propylene fumarate) bone tissue engineering scaffold fabrication using stereolithography: effects of resin formulations and laser parameters. , 2007, Biomacromolecules.

[108]  Fábio Pinto da Silva,et al.  Medical design: Direct metal laser sintering of Ti–6Al–4V , 2010 .

[109]  Yongnian Yan,et al.  Multinozzle low-temperature deposition system for construction of gradient tissue engineering scaffolds. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[110]  Na Wang,et al.  Fabrication of individual scaffolds based on a patient-specific alveolar bone defect model. , 2011, Journal of biotechnology.

[111]  V. Barron,et al.  Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds. , 2012, Acta biomaterialia.

[112]  Guifang Gao,et al.  Human cartilage tissue fabrication using three-dimensional inkjet printing technology. , 2014, Journal of visualized experiments : JoVE.

[113]  Miji Yeo,et al.  Combining a micro/nano-hierarchical scaffold with cell-printing of myoblasts induces cell alignment and differentiation favorable to skeletal muscle tissue regeneration , 2016, Biofabrication.

[114]  Zhi-Yong Zhang,et al.  Porous titanium-6 aluminum-4 vanadium cage has better osseointegration and less micromotion than a poly-ether-ether-ketone cage in sheep vertebral fusion. , 2013, Artificial organs.

[115]  Mark A. Skylar-Scott,et al.  Three-dimensional bioprinting of thick vascularized tissues , 2016, Proceedings of the National Academy of Sciences.

[116]  Ryan B. Wicker,et al.  Fabrication of 3D Biocompatible/Biodegradable Micro-Scaffolds Using Dynamic Mask Projection Microstereolithography , 2009 .

[117]  Frank Sonntag,et al.  Fabrication of porous scaffolds by three‐dimensional plotting of a pasty calcium phosphate bone cement under mild conditions , 2014, Journal of tissue engineering and regenerative medicine.

[118]  D. Cho,et al.  Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres. , 2011, Biomaterials.

[119]  Klaus Liefeith,et al.  Two-Photon Polymerization for Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering Application , 2009 .

[120]  Ventola Cl.  Medical Applications for 3D Printing: Current and Projected Uses. , 2014 .

[121]  Yongnian Yan,et al.  Fabrication of porous poly(l-lactic acid) scaffolds for bone tissue engineering via precise extrusion , 2001 .

[122]  A.C.W. Lau,et al.  Precision extruding deposition and characterization of cellular poly‐ε‐caprolactone tissue scaffolds , 2004 .

[123]  R L Reis,et al.  Nucleation and growth of biomimetic apatite layers on 3D plotted biodegradable polymeric scaffolds: effect of static and dynamic coating conditions. , 2009, Acta biomaterialia.

[124]  E. Kapetanovic,et al.  Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells. , 2014, Acta biomaterialia.

[125]  Shan-hui Hsu,et al.  Air plasma treated chitosan fibers-stacked scaffolds , 2012, Biofabrication.

[126]  GeunHyung Kim,et al.  Cell-laden poly(ɛ-caprolactone)/alginate hybrid scaffolds fabricated by an aerosol cross-linking process for obtaining homogeneous cell distribution: fabrication, seeding efficiency, and cell proliferation and distribution. , 2013, Tissue engineering. Part C, Methods.

[127]  K. Marra,et al.  Injectable in situ forming biodegradable chitosan-hyaluronic acid based hydrogels for cartilage tissue engineering. , 2009, Biomaterials.

[128]  Ritu Raman,et al.  Three-dimensionally printed biological machines powered by skeletal muscle , 2014, Proceedings of the National Academy of Sciences.

[129]  Jean-Pierre Kruth,et al.  In vitro cell-biological performance and structural characterization of selective laser sintered and plasma surface functionalized polycaprolactone scaffolds for bone regeneration. , 2013, Materials science & engineering. C, Materials for biological applications.

[130]  Gabor Forgacs,et al.  Tissue engineering: Perfusable vascular networks. , 2012, Nature materials.

[131]  F. Carpi,et al.  Polyurethane unimorph bender microfabricated with Pressure Assisted Microsyringe (PAM) for biomedical applications , 2009 .

[132]  Dong-Woo Cho,et al.  Application of microstereolithography in the development of three-dimensional cartilage regeneration scaffolds , 2008, Biomedical microdevices.

[133]  Jan Feijen,et al.  Flexible and elastic scaffolds for cartilage tissue engineering prepared by stereolithography using poly(trimethylene carbonate)-based resins. , 2013, Macromolecular bioscience.

[134]  Geunhyung Kim,et al.  Collagen/alginate scaffolds comprising core (PCL)-shell (collagen/alginate) struts for hard tissue regeneration: fabrication, characterisation, and cellular activities. , 2013, Journal of materials chemistry. B.

[135]  M Browne,et al.  Long-term biocompatibility and osseointegration of electron beam melted, free-form–fabricated solid and porous titanium alloy: Experimental studies in sheep , 2013, Journal of biomaterials applications.

[136]  Jos Malda,et al.  Biofabrication of osteochondral tissue equivalents by printing topologically defined, cell-laden hydrogel scaffolds. , 2012, Tissue engineering. Part C, Methods.

[137]  Xiaofeng Cui,et al.  Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging. , 2015, Biotechnology journal.

[138]  Dong-Woo Cho,et al.  3D scaffold fabrication with PPF/DEF using micro-stereolithography , 2007 .

[139]  Costas Fotakis,et al.  Three-dimensional biodegradable structures fabricated by two-photon polymerization. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[140]  P. R. van Weeren,et al.  Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs. , 2013, Macromolecular bioscience.

[141]  Shan-hui Hsu,et al.  Evaluation of the growth of chondrocytes and osteoblasts seeded into precision scaffolds fabricated by fused deposition manufacturing. , 2007, Journal of biomedical materials research. Part B, Applied biomaterials.

[142]  Birgit Glasmacher,et al.  Laser printing of stem cells for biofabrication of scaffold-free autologous grafts. , 2011, Tissue engineering. Part C, Methods.

[143]  G. Tosun,et al.  Analysis of Process Parameters for Porosity in Porous NiTi Implants , 2012 .

[144]  H. Seitz,et al.  Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[145]  Qing Gao,et al.  3D Printing Surgical Implants at the clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction , 2016, Scientific Reports.

[146]  Jan Feijen,et al.  A poly(D,L-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography. , 2009, Biomaterials.

[147]  J. Lewis,et al.  3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.

[148]  Harri Korhonen,et al.  Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography. , 2011, Acta biomaterialia.

[149]  David L. Kaplan,et al.  Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting. , 2016, ACS biomaterials science & engineering.

[150]  S. Downes,et al.  Aligned electrospun polymer fibres for skeletal muscle regeneration. , 2010, European cells & materials.

[151]  Scott C. Brown,et al.  A three-dimensional osteochondral composite scaffold for articular cartilage repair. , 2002, Biomaterials.

[152]  Amit Bandyopadhyay,et al.  Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds. , 2012, Dental materials : official publication of the Academy of Dental Materials.

[153]  Xiaofeng Cui,et al.  Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA , 2015, Biotechnology Letters.

[154]  Dong-Woo Cho,et al.  Development of a bone scaffold using HA nanopowder and micro-stereolithography technology , 2007 .

[155]  Ming-Yih Lee,et al.  Selective laser sintered poly-ε-caprolactone scaffold hybridized with collagen hydrogel for cartilage tissue engineering , 2014, Biofabrication.

[156]  Aleksandr Ovsianikov,et al.  Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells , 2015, Advanced healthcare materials.

[157]  L. Hao,et al.  In vitro biocompatibility of hydroxyapatite-reinforced polymeric composites manufactured by selective laser sintering. , 2009, Journal of biomedical materials research. Part A.

[158]  James J. Yoo,et al.  Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications , 2012, Biofabrication.

[159]  A. Mikos,et al.  Review: tissue engineering for regeneration of articular cartilage. , 2000, Biomaterials.

[160]  Wei Liu,et al.  Fabrication of electrospun poly(L-lactide-co-ε-caprolactone)/collagen nanoyarn network as a novel, three-dimensional, macroporous, aligned scaffold for tendon tissue engineering. , 2013, Tissue engineering. Part C, Methods.

[161]  I Zein,et al.  Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.

[162]  Miguel Castilho,et al.  Fabrication of computationally designed scaffolds by low temperature 3D printing , 2013, Biofabrication.

[163]  Haojiang Li,et al.  Fabrication and biocompatibility of nano non-stoichiometric apatite and poly(ε-caprolactone) composite scaffold by using prototyping controlled process , 2010, Journal of materials science. Materials in medicine.

[164]  Dong-Woo Cho,et al.  The optimization of hybrid scaffold fabrication process in precision deposition system using design of experiments , 2009 .

[165]  Ken Doyle,et al.  Bioprinting: From Patches to Parts , 2014 .

[166]  Yuki Kanno,et al.  Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology , 2009, Journal of Artificial Organs.

[167]  R. Singer,et al.  Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. , 2008, Acta biomaterialia.

[168]  Jennifer H. Elisseeff,et al.  Engineering Structurally Organized Cartilage and Bone Tissues , 2004, Annals of Biomedical Engineering.

[169]  W. Świȩszkowski,et al.  Microfluidic-enhanced 3D bioprinting of aligned myoblast-laden hydrogels leads to functionally organized myofibers in vitro and in vivo. , 2017, Biomaterials.

[170]  Hermann Seitz,et al.  A review on 3D micro-additive manufacturing technologies , 2012, The International Journal of Advanced Manufacturing Technology.

[171]  Bin Duan,et al.  Customized Ca–P/PHBV nanocomposite scaffolds for bone tissue engineering: design, fabrication, surface modification and sustained release of growth factor , 2010, Journal of The Royal Society Interface.

[172]  K W Dalgarno,et al.  Processing of an apatite-mullite glass-ceramic and an hydroxyapatite/phosphate glass composite by selective laser sintering , 2005, Journal of materials science. Materials in medicine.

[173]  J. Russias,et al.  Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting. , 2007, Journal of biomedical materials research. Part A.

[174]  Thomas Eschenhagen,et al.  Engineering Cardiac Muscle Tissue: A Maturating Field of Research. , 2017, Circulation research.

[175]  Chee Kai Chua,et al.  Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling , 2008 .

[176]  Dong-Woo Cho,et al.  Solid Free‐Form Fabrication of Tissue‐Engineering Scaffolds with a Poly(lactic‐co‐glycolic acid) Grafted Hyaluronic Acid Conjugate Encapsulating an Intact Bone Morphogenetic Protein–2/Poly(ethylene glycol) Complex , 2011 .

[177]  Yongnian Yan,et al.  Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition , 2002 .

[178]  Dong-Woo Cho,et al.  A new method of fabricating robust freeform 3D ceramic scaffolds for bone tissue regeneration , 2013, Biotechnology and bioengineering.

[179]  R. Tuan,et al.  Projection Stereolithographic Fabrication of Human Adipose Stem Cell-Incorporated Biodegradable Scaffolds for Cartilage Tissue Engineering , 2015, Front. Bioeng. Biotechnol..

[180]  Joselito M. Razal,et al.  Wet‐Spun Biodegradable Fibers on Conducting Platforms: Novel Architectures for Muscle Regeneration , 2009 .

[181]  Ali Khademhosseini,et al.  Skeletal muscle tissue engineering: methods to form skeletal myotubes and their applications. , 2014, Tissue engineering. Part B, Reviews.

[182]  K H Kang,et al.  Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds , 2012, Biofabrication.

[183]  S. Teoh,et al.  Scaffold design and in vitro study of osteochondral coculture in a three-dimensional porous polycaprolactone scaffold fabricated by fused deposition modeling. , 2003, Tissue engineering.

[184]  Gabriel Popescu,et al.  High‐Resolution Projection Microstereolithography for Patterning of Neovasculature , 2016, Advanced healthcare materials.

[185]  S. M. Ahmadi,et al.  Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells. , 2014, Journal of the mechanical behavior of biomedical materials.

[186]  Fabien Guillemot,et al.  In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice , 2010, Biofabrication.

[187]  Bin Duan,et al.  Encapsulation and release of biomolecules from Ca-P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering , 2010 .

[188]  Amit Bandyopadhyay,et al.  3D printed tricalcium phosphate bone tissue engineering scaffolds: effect of SrO and MgO doping on in vivo osteogenesis in a rat distal femoral defect model , 2013 .

[189]  Jean-Pierre Kruth,et al.  Material incress manufacturing by rapid prototyping techniques , 1991 .

[190]  Stefan Stübinger,et al.  Histological and biomechanical analysis of porous additive manufactured implants made by direct metal laser sintering: a pilot study in sheep. , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

[191]  Wei Sun,et al.  Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro. , 2007, Biomaterials.

[192]  D. D’Lima,et al.  Direct human cartilage repair using three-dimensional bioprinting technology. , 2012, Tissue engineering. Part A.

[193]  Anders Snis,et al.  Electron beam-melted, free-form-fabricated titanium alloy implants: Material surface characterization and early bone response in rabbits. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

[194]  Deok‐Ho Kim,et al.  Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink , 2014, Nature Communications.

[195]  Johnson H. Y. Chung,et al.  Bio-ink properties and printability for extrusion printing living cells. , 2013, Biomaterials science.

[196]  Jan Feijen,et al.  Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(D,L-lactide)-based resins. , 2010, Journal of controlled release : official journal of the Controlled Release Society.

[197]  Chee Kai Chua,et al.  Fabrication of customised scaffolds using computer‐aided design and rapid prototyping techniques , 2005 .

[198]  A. Bandyopadhyay,et al.  From CT Scan to Ceramic Bone Graft , 2003 .

[199]  Frank A. Müller,et al.  Direct Printing of Bioceramic Implants with Spatially Localized Angiogenic Factors , 2007 .

[200]  A Piattelli,et al.  Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants. , 2008, Dental materials : official publication of the Academy of Dental Materials.

[201]  Y. L. Chuan,et al.  Extrusion based rapid prototyping technique: An advanced platform for tissue engineering scaffold fabrication , 2012, Biopolymers.

[202]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[203]  Lian Qin,et al.  The Research of Technique on Fabricating Hydrogel Scaffolds for Cartilage Tissue Engineering Based on Stereo-lithography , 2010, 2010 International Conference on Digital Manufacturing & Automation.

[204]  Wim E Hennink,et al.  In vivo biocompatibility and biodegradation of 3D-printed porous scaffolds based on a hydroxyl-functionalized poly(ε-caprolactone). , 2012, Biomaterials.

[205]  Jake E. Barralet,et al.  3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies , 2008 .

[206]  Ji Hyun Kim,et al.  Three-dimensional cell-based bioprinting for soft tissue regeneration , 2016, Tissue Engineering and Regenerative Medicine.

[207]  P. Greil,et al.  Sintering of 3D‐Printed Glass/HAp Composites , 2012 .

[208]  Florencia Edith Wiria,et al.  Printing of Titanium implant prototype , 2010 .

[209]  P. Calvert,et al.  Trabecular scaffolds created using micro CT guided fused deposition modeling. , 2008, Materials science & engineering. C, Materials for biological applications.

[210]  Shaun Eshraghi,et al.  Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering. , 2010, Acta biomaterialia.

[211]  J. Planell,et al.  High-resolution PLA-based composite scaffolds via 3-D printing technology. , 2013, Acta biomaterialia.

[212]  Fabrication of an osteochondral graft with using a solid freeform fabrication system , 2015, Tissue Engineering and Regenerative Medicine.

[213]  Chee Kai Chua,et al.  Development of a 95/5 poly(L-lactide-co-glycolide)/hydroxylapatite and beta-tricalcium phosphate scaffold as bone replacement material via selective laser sintering. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

[214]  N. Orhan,et al.  A study on microstructure and porosity of NiTi alloy implants produced by SHS , 2009 .

[215]  James J. Yoo,et al.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.

[216]  A. L. Oliveira,et al.  Peripheral mineralization of a 3D biodegradable tubular construct as a way to enhance guidance stabilization in spinal cord injury regeneration , 2012, Journal of Materials Science: Materials in Medicine.

[217]  S. Milz,et al.  Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing , 2005, Journal of materials science. Materials in medicine.

[218]  Bin Duan,et al.  Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering. , 2010, Acta biomaterialia.

[219]  Wan-Ju Li,et al.  Braided nanofibrous scaffold for tendon and ligament tissue engineering. , 2013, Tissue engineering. Part A.

[220]  J. M. Centanni,et al.  StrataGraft Skin Substitute Is Well-tolerated and Is Not Acutely Immunogenic in Patients With Traumatic Wounds: Results From a Prospective, Randomized, Controlled Dose Escalation Trial , 2011, Annals of surgery.

[221]  G. Reilly,et al.  Emulsion templated scaffolds with tunable mechanical properties for bone tissue engineering , 2016, Journal of the mechanical behavior of biomedical materials.

[222]  Anthony Atala,et al.  Essentials of 3D Biofabrication and Translation , 2015 .

[223]  David Dean,et al.  Continuous digital light processing (cDLP): Highly accurate additive manufacturing of tissue engineered bone scaffolds , 2012, Virtual and physical prototyping.

[224]  Joseph Suhan,et al.  Bioprinting of Growth Factors onto Aligned Sub-micron Fibrous Scaffolds for Simultaneous Control of Cell Differentiation and Alignment , 2022 .

[225]  M. Vallet‐Regí,et al.  Bioactive glass as precursor of designed-architecture scaffolds for tissue engineering. , 2007, Journal of biomedical materials research. Part A.

[226]  Amit Bandyopadhyay,et al.  Pore size and pore volume effects on alumina and TCP ceramic scaffolds , 2003 .

[227]  Swee Hin Teoh,et al.  Repair of calvarial defects with customised tissue-engineered bone grafts II. Evaluation of cellular efficiency and efficacy in vivo. , 2003, Tissue engineering.

[228]  Visar Ajeti,et al.  Myocardial Tissue Engineering With Cells Derived From Human-Induced Pluripotent Stem Cells and a Native-Like, High-Resolution, 3-Dimensionally Printed Scaffold , 2017, Circulation research.

[229]  J. Goh,et al.  Characterization of a novel polymeric scaffold for potential application in tendon/ligament tissue engineering. , 2006, Tissue engineering.

[230]  Jan Feijen,et al.  Fumaric acid monoethyl ester-functionalized poly(D,L-lactide)/N-vinyl-2-pyrrolidone resins for the preparation of tissue engineering scaffolds by stereolithography. , 2009, Biomacromolecules.

[231]  Ming-Chuan Leu,et al.  Progress in Additive Manufacturing and Rapid Prototyping , 1998 .

[232]  Uwe Gbureck,et al.  Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices. , 2007, Journal of controlled release : official journal of the Controlled Release Society.

[233]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[234]  A. Criollo,et al.  Cardiomyocyte death: mechanisms and translational implications , 2011, Cell Death and Disease.

[235]  Yang Wu,et al.  Direct E-jet printing of three-dimensional fibrous scaffold for tendon tissue engineering. , 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

[236]  Swee Hin Teoh,et al.  Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo. , 2009, Journal of biomedical materials research. Part A.

[237]  B. Duan,et al.  3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels. , 2013, Journal of biomedical materials research. Part A.

[238]  R. Misra,et al.  The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting. , 2016, Journal of the mechanical behavior of biomedical materials.

[239]  Lorenzo Moroni,et al.  Polymer hollow fiber three-dimensional matrices with controllable cavity and shell thickness. , 2006, Biomaterials.

[240]  Dong-Woo Cho,et al.  Effect of pore architecture and stacking direction on mechanical properties of solid freeform fabrication-based scaffold for bone tissue engineering. , 2012, Journal of biomedical materials research. Part A.

[241]  Sheila MacNeil,et al.  The Tissue-Engineered Vascular Graft—Past, Present, and Future , 2015, Tissue engineering. Part B, Reviews.

[242]  Ashkan Shafiee,et al.  Predictive modeling of post bioprinting structure formation. , 2014, Soft matter.

[243]  Jean-Pierre Kruth,et al.  Effect of SLM Parameters on Transformation Temperatures of Shape Memory Nickel Titanium Parts , 2014 .

[244]  Wei Sun,et al.  Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds , 2005 .

[245]  Sangwon Chung,et al.  Hierarchical starch‐based fibrous scaffold for bone tissue engineering applications , 2009, Journal of tissue engineering and regenerative medicine.

[246]  Ashkan Shafiee,et al.  Transparent conducting thin films of fluoro doped tin oxide (FTO) deposited using inkjet printing technique , 2010, 2010 IEEE International Conference on Semiconductor Electronics (ICSE2010).

[247]  D. Hutmacher,et al.  Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.

[248]  Clemens A van Blitterswijk,et al.  Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing. , 2010, Acta biomaterialia.

[249]  J. Suwanprateeb,et al.  Mechanical and in vitro performance of apatite–wollastonite glass ceramic reinforced hydroxyapatite composite fabricated by 3D-printing , 2009, Journal of materials science. Materials in medicine.

[250]  Jin Man Kim,et al.  In vitro and in vivo characteristics of PCL scaffolds with pore size gradient fabricated by a centrifugation method. , 2007, Biomaterials.

[251]  Frederik L. Giesel,et al.  3D printing based on imaging data: review of medical applications , 2010, International Journal of Computer Assisted Radiology and Surgery.

[252]  W. Tsai,et al.  The roles of RGD and grooved topography in the adhesion, morphology, and differentiation of C2C12 skeletal myoblasts , 2012, Biotechnology and bioengineering.

[253]  Xiaofeng Cui,et al.  Synergistic action of fibroblast growth factor‐2 and transforming growth factor‐beta1 enhances bioprinted human neocartilage formation , 2012, Biotechnology and bioengineering.

[254]  E. Tan,et al.  Proliferation and Differentiation of Human Osteoblasts within 3D printed Poly-Lactic-co-Glycolic Acid Scaffolds , 2009, Journal of biomaterials applications.

[255]  M. Leu,et al.  Effect of material, process parameters, and simulated body fluids on mechanical properties of 13-93 bioactive glass porous constructs made by selective laser sintering. , 2012, Journal of the mechanical behavior of biomedical materials.

[256]  Eric D. Miller,et al.  Microenvironments Engineered by Inkjet Bioprinting Spatially Direct Adult Stem Cells Toward Muscle‐ and Bone‐Like Subpopulations , 2008, Stem cells.

[257]  Colleen L Flanagan,et al.  Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.

[258]  H. Ouyang,et al.  Allogenous Tendon Stem/Progenitor Cells in Silk Scaffold for Functional Shoulder Repair , 2012, Cell transplantation.

[259]  Wei Zhu,et al.  Improved Human Bone Marrow Mesenchymal Stem Cell Osteogenesis in 3D Bioprinted Tissue Scaffolds with Low Intensity Pulsed Ultrasound Stimulation , 2016, Scientific Reports.

[260]  Eduardo Saiz,et al.  Sintering and robocasting of beta-tricalcium phosphate scaffolds for orthopaedic applications. , 2005, Acta biomaterialia.

[261]  Ali Khademhosseini,et al.  Dielectrophoretically Aligned Carbon Nanotubes to Control Electrical and Mechanical Properties of Hydrogels to Fabricate Contractile Muscle Myofibers , 2013, Advanced materials.

[262]  Gabriele Grimm,et al.  Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants , 2007, Journal of materials science. Materials in medicine.

[263]  Bin Duan,et al.  Current progress in tissue engineering of heart valves: multiscale problems, multiscale solutions , 2015, Expert opinion on biological therapy.

[264]  E. Pişkin,et al.  A novel biodegradable PCL film for tendon reconstruction: Achilles tendon defect model in rats. , 2003, The International journal of artificial organs.

[265]  Mallory R. Busso,et al.  Digital micromirror device (DMD)-based 3D printing of poly(propylene fumarate) scaffolds. , 2016, Materials science & engineering. C, Materials for biological applications.

[266]  A Ahluwalia,et al.  Microsyringe-based deposition of two-dimensional and three-dimensional polymer scaffolds with a well-defined geometry for application to tissue engineering. , 2002, Tissue engineering.

[267]  A. Seifalian,et al.  Tendon Reconstruction with Tissue Engineering Approach--A Review. , 2015, Journal of biomedical nanotechnology.

[268]  Inês Pires,et al.  Design and production of sintered β-tricalcium phosphate 3D scaffolds for bone tissue regeneration , 2012 .

[269]  S. Howdle,et al.  In vitro study of hydroxyapatite-based photocurable polymer composites prepared by laser stereolithography and supercritical fluid extraction. , 2008, Acta biomaterialia.

[270]  P. Bártolo,et al.  Additive manufacturing of tissues and organs , 2012 .

[271]  Swathi Rangarajan,et al.  Use of Flow, Electrical, and Mechanical Stimulation to Promote Engineering of Striated Muscles , 2013, Annals of Biomedical Engineering.

[272]  W. Tan,et al.  In situ controlled release of rhBMP-2 in gelatin-coated 3D porous poly(ε-caprolactone) scaffolds for homogeneous bone tissue formation. , 2014, Biomacromolecules.

[273]  Hyeongjin Lee,et al.  Functional cell-laden alginate scaffolds consisting of core/shell struts for tissue regeneration. , 2013, Carbohydrate polymers.

[274]  Peng Xiu,et al.  Enhanced angiogenesis and osteogenesis in critical bone defects by the controlled release of BMP-2 and VEGF: implantation of electron beam melting-fabricated porous Ti6Al4V scaffolds incorporating growth factor-doped fibrin glue , 2015, Biomedical materials.

[275]  Dong-Woo Cho,et al.  An additive manufacturing‐based PCL–alginate–chondrocyte bioprinted scaffold for cartilage tissue engineering , 2015, Journal of tissue engineering and regenerative medicine.

[276]  S. Jacobsson,et al.  Split skin graft reconstruction in vaginal agenesis: a long-term follow-up. , 2004, Scandinavian journal of plastic and reconstructive surgery and hand surgery.

[277]  Precision extruding deposition of composite polycaprolactone/hydroxyapatite scaffolds for bone tissue engineering , 2005, Proceedings of the IEEE 31st Annual Northeast Bioengineering Conference, 2005..

[278]  Chuanbin Mao,et al.  3D printed personalized titanium plates improve clinical outcome in microwave ablation of bone tumors around the knee , 2017, Scientific Reports.

[279]  D. Grijpma,et al.  Preparation of designed poly(D,L-lactide)/nanosized hydroxyapatite composite structures by stereolithography. , 2013, Acta biomaterialia.

[280]  A. Ahluwalia,et al.  Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition. , 2003, Biomaterials.

[281]  G. Thouas,et al.  Bone tissue engineering scaffolding: computer-aided scaffolding techniques , 2014, Progress in Biomaterials.

[282]  Fernando Guiberteau,et al.  Finite element modeling as a tool for predicting the fracture behavior of robocast scaffolds. , 2008, Acta biomaterialia.

[283]  Uwe Gbureck,et al.  3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects. , 2010, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[284]  Eric D. Miller,et al.  Engineered spatial patterns of FGF-2 immobilized on fibrin direct cell organization. , 2005, Biomaterials.

[285]  Ashkan Shafiee,et al.  Transparent Conductive Electrode of Fluorine Doped Tin Oxide Prepared by Inkjet Printing Technique , 2010 .

[286]  Wei Sun,et al.  Precision extruding deposition (PED) fabrication of polycaprolactone (PCL) scaffolds for bone tissue engineering , 2009, Biofabrication.

[287]  Igor Shishkovsky,et al.  Porous titanium and nitinol implants synthesized by SHS/SLS: Microstructural and histomorphological analyses of tissue reactions , 2010 .

[288]  James J. Yoo,et al.  Bioprinting technology and its applications. , 2014, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.

[289]  Jukka Seppälä,et al.  Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling. , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

[290]  Ryan B. Wicker,et al.  Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting , 2012, International journal of biomaterials.

[291]  Ming-Yih Lee,et al.  EFFECTS OF GELATIN MODIFICATION ON RAPID PROTOTYPING PCL SCAFFOLDS FOR CARTILAGE ENGINEERING , 2011 .

[292]  Francesca De Crescenzio,et al.  Direct metal laser sintering (DMLS) of a customized titanium mesh for prosthetically guided bone regeneration of atrophic maxillary arches , 2011, Medical & Biological Engineering & Computing.

[293]  G Majni,et al.  Structural characterization of biomedical Co-Cr-Mo components produced by direct metal laser sintering. , 2015, Materials science & engineering. C, Materials for biological applications.

[294]  Peter Greil,et al.  Additive Manufacturing of Ceramic‐Based Materials , 2014 .

[295]  H Weinans,et al.  Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties. , 2017, Acta biomaterialia.

[296]  Guifang Gao,et al.  Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells. , 2014, Biotechnology journal.

[297]  Michael P. Murphy,et al.  Comparison of biomaterial-dependent and -independent bioprinting methods for cardiovascular medicine , 2017 .

[298]  R Langer,et al.  Neocartilage formation in vitro and in vivo using cells cultured on synthetic biodegradable polymers. , 1993, Journal of biomedical materials research.

[299]  A. A. Zadpoor,et al.  Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing , 2013 .

[300]  N Verdonschot,et al.  Bone ingrowth potential of electron beam and selective laser melting produced trabecular-like implant surfaces with and without a biomimetic coating , 2013, Journal of Materials Science: Materials in Medicine.

[301]  Miguel Castilho,et al.  Application of a 3D printed customized implant for canine cruciate ligament treatment by tibial tuberosity advancement , 2014, Biofabrication.

[302]  Wenguang Zhang,et al.  Fabrication and characterization of porous Ti6Al4V parts for biomedical applications using electron beam melting process , 2009 .

[303]  Antonios G. Mikos,et al.  Formation of highly porous biodegradable scaffolds for tissue engineering , 2000 .

[304]  S. Hsu,et al.  Fabrication of precision scaffolds using liquid-frozen deposition manufacturing for cartilage tissue engineering. , 2009, Tissue engineering. Part A.

[305]  C. Norotte,et al.  Cellular bioink surface tension: A tunable biophysical parameter for faster maturation of bioprinted tissue , 2017 .

[306]  Han Zhang,et al.  Microassembly Fabrication of Tissue Engineering Scaffolds With Customized Design , 2008, IEEE Transactions on Automation Science and Engineering.

[307]  C. Shuai,et al.  In vitro bioactivity and degradability of β‐tricalcium phosphate porous scaffold fabricated via selective laser sintering , 2013, Biotechnology and applied biochemistry.