Development of a package model for process simulation and cost estimation of seawater reverse osmosis desalination plant

Seawater reverse osmosis (SWRO) desalination is rising as an alternative solution for the water shortage problem which is more severe than before. In this study, a package of process models was developed and tested by four-year SWRO plant operation data obtained from Fujairah in UAE, as a tool not only for simulating the performance of SWRO desalination process but for estimating the total profits of the plant operation. The simulation results based on the developed process models were reasonably satisfied to predict the SWRO desalination plant performance in terms of permeate water concentration and flow rate. And the results of cost estimation show a possibility that the models can successfully predict total annual profits (TAP) within the order of magnitude of USD/year, according to operating date, feed water concentration, and permeate water condition. Consequently, the developed package model is applicable to support design criteria and efficient operation of SWRO desalination plant as references.

[1]  W. T. Hanbury,et al.  Numerical simulation and optimisation of spiral-wound modules , 1992 .

[2]  S. Nisan,et al.  A new method for the treatment of the reverse osmosis process, with preheating of the feedwater , 2005 .

[3]  Lloyd P. M. Johnston,et al.  Optimal design of reverse osmosis module networks , 2000 .

[4]  Joon Ha Kim,et al.  Overview of systems engineering approaches for a large-scale seawater desalination plant with a reverse osmosis network , 2009 .

[5]  Suhan Kim,et al.  SEAHERO R&D program and key strategies for the scale-up of a seawater reverse osmosis (SWRO) system , 2009 .

[6]  Abderrahim Abbas,et al.  Modeling of an RO water desalination unit using neural networks , 2005 .

[7]  Pio A. Aguirre,et al.  Global optimal design of reverse osmosis networks for seawater desalination: modeling and algorithm , 2005 .

[8]  Miguel Angel Sanza,et al.  Fujairah reverse osmosis plant: 2 years of operation , 2007 .

[9]  In S. Kim,et al.  A control methodology for the feed water temperature to optimize SWRO desalination process using genetic programming , 2009 .

[10]  Abderrahim Abbas,et al.  Predicting the performance of RO membranes , 2000 .

[11]  Joon Ha Kim,et al.  Artificial neural network model for optimizing operation of a seawater reverse osmosis desalination plant. , 2009 .

[12]  Yang-Dong Hu,et al.  Optimum design of reverse osmosis system under different feed concentration and product specification , 2007 .

[13]  Dong-mei Xu,et al.  Optimum design of reverse osmosis seawater desalination system considering membrane cleaning and replacing , 2006 .

[14]  H. Mehdizadeh,et al.  Membrane desalination plants from an energy–exergy viewpoint , 2006 .

[15]  Mohammad Nurul Alam Hawlader,et al.  Desalination of seawater: an experiment with RO membranes , 2000 .

[16]  Vítor Geraldes,et al.  Simulation and optimization of medium-sized seawater reverse osmosis processes with spiral-wound modules , 2005 .

[17]  Abderrahim Abbas,et al.  Modeling an industrial reverse osmosis unit , 1999 .

[18]  R. Audebert,et al.  Adsorption of neutral polysaccharides at the silica-water interface role in the formation of a fouling cake at the filtration membrane surfaces used in water treatment , 1992 .

[19]  Mohammad Nurul Alam Hawlader,et al.  Design and economics of RO seawater desalination , 1996 .

[20]  Joon Ha Kim,et al.  Site-specific raw seawater quality impact study on SWRO process for optimizing operation of the pressurized step , 2009 .