In-vitro evaluation of Polylactic acid (PLA) manufactured by fused deposition modeling

[1]  N. Spencer,et al.  Proliferation, behavior, and differentiation of osteoblasts on surfaces of different microroughness. , 2016, Dental materials : official publication of the Academy of Dental Materials.

[2]  Ruijing Guo,et al.  Fabrication of 3D Scaffolds with Precisely Controlled Substrate Modulus and Pore Size by Templated‐Fused Deposition Modeling to Direct Osteogenic Differentiation , 2015, Advanced healthcare materials.

[3]  Christian J. Petropolis,et al.  Accuracy of medical models made by consumer-grade fused deposition modelling printers , 2015, Plastic surgery.

[4]  Guohua Xu,et al.  3D artificial bones for bone repair prepared by computed tomography-guided fused deposition modeling for bone repair. , 2014, ACS applied materials & interfaces.

[5]  Paulo Jorge Da Silva bartolo,et al.  Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering , 2014 .

[6]  Dominik Rietzel,et al.  Suitability of PLA/TCP for fused deposition modeling , 2012 .

[7]  T. Maekawa,et al.  POLYMERIC SCAFFOLDS IN TISSUE ENGINEERING APPLICATION: A REVIEW , 2011 .

[8]  S. Zhang,et al.  The effect of poly (L-lactic acid) nanofiber orientation on osteogenic responses of human osteoblast-like MG63 cells. , 2011, Journal of the mechanical behavior of biomedical materials.

[9]  Pierre Weiss,et al.  Behaviour of mesenchymal stem cells, fibroblasts and osteoblasts on smooth surfaces. , 2011, Acta biomaterialia.

[10]  P. Pavasant,et al.  Human osteoblast-like cell spreading and proliferation on Ti-6Al-7Nb surfaces of varying roughness. , 2011, Journal of oral science.

[11]  E. Kontou,et al.  Effects of aging on the thermomechanical properties of poly(lactic acid) , 2011 .

[12]  J. Mühling,et al.  Resorbable versus titanium osteosynthesis devices in bilateral sagittal split ramus osteotomy of the mandible - the results of a two centre randomised clinical study with an eight-year follow-up. , 2010, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[13]  Gang Chai,et al.  Rapid prototyped PGA/PLA scaffolds in the reconstruction of mandibular condyle bone defects , 2010, The international journal of medical robotics + computer assisted surgery : MRCAS.

[14]  Antonio Gloria,et al.  3D fiber deposition technique to make multifunctional and tailor-made scaffolds for tissue engineering applications. , 2009, Journal of applied biomaterials & biomechanics : JABB.

[15]  E. Nkenke,et al.  In vitro behavior of layer-by-layer deposited molecular oligoelectrolyte films on Ti–6Al–4V surfaces , 2009, Journal of materials science. Materials in medicine.

[16]  Dominik Rietzel,et al.  Additive Processing of Polymers , 2008 .

[17]  Cato T. Laurencin,et al.  Electrospun poly(lactic acid-co-glycolic acid) scaffolds for skin tissue engineering. , 2008, Biomaterials.

[18]  Syed H. Masood,et al.  Design and fabrication of reconstructive mandibular models using fused deposition modeling , 2008 .

[19]  L. Lim,et al.  Processing technologies for poly(lactic acid) , 2008 .

[20]  Christoph Hanisch,et al.  Evolvability and the intangibles , 2008 .

[21]  Yunzhi Yang,et al.  The effect of titanium surface roughening on protein absorption, cell attachment, and cell spreading. , 2008, The International journal of oral & maxillofacial implants.

[22]  P. Coelho,et al.  In vitro degradation of poly-l-d-lactic acid (PLDLA) pellets and powder used as synthetic alloplasts for bone grafting , 2008, Journal of materials science. Materials in medicine.

[23]  Minna Kellomäki,et al.  A review of rapid prototyping techniques for tissue engineering purposes , 2008, Annals of medicine.

[24]  Robert F. Singer,et al.  Cellular Titanium by Selective Electron Beam Melting , 2007 .

[25]  Shan-hui Hsu,et al.  Evaluation of the growth of chondrocytes and osteoblasts seeded into precision scaffolds fabricated by fused deposition manufacturing. , 2007, Journal of biomedical materials research. Part B, Applied biomaterials.

[26]  W. D. de Jong,et al.  Tissue response to partially in vitro predegraded poly-L-lactide implants. , 2005, Biomaterials.

[27]  Eduardo Abreu,et al.  Mow VC, Huiskes R: Basic Orthopaedic Biomechanics and Mechano-Biology , 2005 .

[28]  Amit Bandyopadhyay,et al.  Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling , 2003 .

[29]  E. Sachlos,et al.  Making tissue engineering scaffolds work. Review: the application of solid freeform fabrication technology to the production of tissue engineering scaffolds. , 2003, European cells & materials.

[30]  R. Adhikari,et al.  Biodegradable synthetic polymers for tissue engineering. , 2003, European cells & materials.

[31]  G. Reilly,et al.  Attachment of human marrow stromal cells to titanium surfaces. , 2003, The Journal of oral implantology.

[32]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[33]  I Zein,et al.  Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.

[34]  J C Middleton,et al.  Synthetic biodegradable polymers as orthopedic devices. , 2000, Biomaterials.

[35]  Nureddin Ashammakhi,et al.  Strength retention of self-reinforced drawn poly-L/DL-lactide 70/30 (SR-PLA70) rods and fixation properties of distal femoral osteotomies with these rods. An experimental study on rats , 2000, Journal of biomaterials science. Polymer edition.

[36]  Duc Truong Pham,et al.  A comparison of rapid prototyping technologies , 1998 .

[37]  O. Böstman,et al.  Absorbable pins of self-reinforced poly-L-lactic acid for fixation of fractures and osteotomies. , 1992, The Journal of bone and joint surgery. British volume.

[38]  P. Törmälä,et al.  Comparison of in vitro hydrolysis, subcutaneous and intramedullary implantation to evaluate the strength retention of absorbable osteosynthesis implants. , 1990, Biomaterials.

[39]  S. Santavirta,et al.  Immune response to polyglycolic acid implants. , 1990, The Journal of bone and joint surgery. British volume.

[40]  Alessandro Marro,et al.  Three-Dimensional Printing and Medical Imaging: A Review of the Methods and Applications. , 2016, Current problems in diagnostic radiology.

[41]  L. Bačáková,et al.  Adhesion, growth and differentiation of osteoblasts on surface-modified materials developed for bone implants. , 2011, Physiological research.

[42]  Emeka Nkenke,et al.  In vivo performance of selective electron beam-melted Ti-6Al-4V structures. , 2010, Journal of biomedical materials research. Part A.

[43]  H.W.J. Huiskes,et al.  Basic orthopaedic biomechanics and mechano-biology , 2005 .

[44]  R. Suuronen,et al.  Bioabsorbable plates and screws: Current state of the art in facial fracture repair. , 2000, The Journal of cranio-maxillofacial trauma.

[45]  C T Laurencin,et al.  Three-dimensional degradable porous polymer-ceramic matrices for use in bone repair. , 1996, Journal of biomaterials science. Polymer edition.

[46]  R. Bos,et al.  Degradation of and tissue reaction to biodegradable poly(L-lactide) for use as internal fixation of fractures: a study in rats. , 1991, Biomaterials.

[47]  J. Rudigier,et al.  [Release and diffusion of methylmethacrylic monomers after the implantation of self curing bone cements. Study on laboratory specimens and animal experiments (author's transl)]. , 1981, Unfallchirurgie.