Toughening of linear low-density polyethylene/brominated polystyrene blend by styrene-ethylene/butylene-styrene elastomer

[1]  Zhiyuan Jiang,et al.  Improved interlaminar fracture toughness of carbon fiber/epoxy composites by a combination of extrinsic and intrinsic multiscale toughening mechanisms , 2023, Composites Part B: Engineering.

[2]  H. Sue,et al.  Mechanical properties of reactive polyetherimide-modified tetrafunctional epoxy systems , 2023, Polymer.

[3]  Mingzhen Zhao,et al.  Multifunctional polyethylene nanocomposites based on polyethylene-grafted α-zirconium phosphate nanoplatelets , 2022, Polymer.

[4]  Mingzhen Zhao,et al.  Well‐dispersed poly(ether‐ether‐ketone)/multi‐walled carbon nanotubes nanocomposite for harsh environment applications , 2022, Journal of Applied Polymer Science.

[5]  Yaqing Liu,et al.  Bio-inspired, epoxy-based lamellar composites with superior fracture toughness by delignified wood scaffold , 2021 .

[6]  Mingzhen Zhao,et al.  Preparation of Well-Exfoliated Poly(ethylene-co-vinyl acetate)/α-Zirconium Phosphate Nanocomposites. , 2021, Langmuir : the ACS journal of surfaces and colloids.

[7]  Mingzhen Zhao,et al.  Well‐dispersed poly(ether‐ether‐ketone)/ multi‐walled carbon nanotube nanocomposites prepared via a simple solution mixing approach , 2021 .

[8]  P. Liu,et al.  The influence of processing conditions on the mechanical properties of poly(aryl‐ether‐ketone)/polybenzimidazole blends , 2020 .

[9]  Hao‐Bin Zhang,et al.  Electrically Conductive and Flame Retardant Graphene/Brominated Polystyrene/Maleic Anhydride Grafted High Density Polyethylene Nanocomposites with Satisfactory Mechanical Properties , 2019, Chinese Journal of Polymer Science.

[10]  P. Liu,et al.  Effect of annealing on the viscoelastic behavior of poly(ether-ether-ketone) , 2019, Polymer.

[11]  F. Ronkay,et al.  Investigation of compatibilization effects of SEBS-g-MA on polystyrene/polyethylene blend with a novel separation method in melted state , 2016, Polymer Bulletin.

[12]  Zhengping Fang,et al.  Effect of Friedel–Crafts reaction on the thermal stability and flammability of high‐density polyethylene/brominated polystyrene/graphene nanoplatelet composites , 2014 .

[13]  Zheng‐Huan Wu,et al.  Morphology, mechanical, and rheological properties of poly(lactic acid)/ethylene acrylic acid copolymer blends processing via vane extruder , 2014 .

[14]  Jongil Weon,et al.  Impact performance and toughening mechanisms of toughness-tailored polypropylene impact copolymers , 2013, Journal of Materials Science.

[15]  K. Shahbazi,et al.  Rheology, morphology and tensile properties of reactive compatibilized polyethylene/polystyrene blends via Friedel–Crafts alkylation reaction , 2012, Polymer Bulletin.

[16]  Xiaojie Guo,et al.  Effects of reactive blending temperature on impact toughness of poly(lactic acid) ternary blends , 2012 .

[17]  M. Šlouf,et al.  Morphology and Properties of SEBS Block Copolymer Compatibilized PS/HDPE Blends , 2008 .

[18]  H. Khonakdar,et al.  Correlation of morphology and rheological response of interfacially modified PTT/m-LLDPE blends with varying extent of modification , 2005 .

[19]  N. Capiati,et al.  Polyethylene–polystyrene grafting reaction: effects of polyethylene molecular weight , 2002 .

[20]  R. Braglia,et al.  Syndiotactic polystyrene/high‐density polyethylene blends compatibilized with SEBS copolymer: thermal, morphological, tensile, dynamic‐mechanical, and ultrasonic characterization , 2000 .

[21]  I. Luzinov,et al.  Dependence of phase morphology and mechanical properties of PS/SBR/PE ternary blends on composition: transition from core-shell to triple-phase continuity structures , 2000 .

[22]  C. Han,et al.  Evolution of polymer blend morphology during compounding in a twin-screw extruder , 2000 .

[23]  Jianjun Lu,et al.  Morphology and fracture behavior in aliphatic polyketones , 2000 .

[24]  C. Han,et al.  Evolution of polymer blend morphology during compounding in an internal mixer , 1999 .

[25]  G. Radonjič.  Compatibilization effects of styrenic/rubber block copolymers in polypropylene/polystyrene blends , 1999 .

[26]  Y. M. Lee,et al.  Compatibilizing effect of maleic anhydride functionalized SEBS triblock elastomer through a reaction induced phase formation in the blends of polyamide6 and polycarbonate: 2. Mechanical properties , 1997 .

[27]  C. Han,et al.  Plasticating single-screw extrusion of amorphous polymers: Development of a mathematical model and comparison with experiment , 1996 .

[28]  J. Rösch.  Modeling the mechanical properties in polypropylene/polyamide‐6 blends with core shell morphology , 1995 .

[29]  S. Balke,et al.  The compatibility of linear low density polyethylene‐polypropylene blends: Viscosity ratio plots , 1994 .

[30]  Heh Han Meijer,et al.  Droplet breakup mechanisms : stepwise equilibrium versus transient dispersion , 1993 .

[31]  S. Nagai,et al.  Thermal conductivity of polyethylene/polystyrene blends containing SEBS block copolymer , 1992 .

[32]  B. D. Favis,et al.  The effect of viscosity ratio on the morphology of polypropylene/polycarbonate blends during processing , 1987 .

[33]  W. E. Baker,et al.  Polystyrene-polyethylene melt blends obtained through reactive mixing process , 1987 .

[34]  Souheng Wu.  Formation of dispersed phase in incompatible polymer blends: Interfacial and rheological effects , 1987 .

[35]  A. Rudin.  Copolymers in Polymer Blends , 1980 .