Mechanical behaviour and tribological properties of cenosphere-copper composites using design of experiments

[1]  S. K. Acharya,et al.  Mechanical and dry sliding wear behavior of LM6/cenosphere composites , 2018, International Journal of Engineering, Science and Technology.

[2]  M. Z. Khan,et al.  Utilisation of industrial waste (Fly ash) in synthesis of copper based surface composite through friction stir processing route for wear applications , 2018, Journal of Cleaner Production.

[3]  I. Dinaharan,et al.  Low cost metal matrix composites based on aluminum, magnesium and copper reinforced with fly ash prepared using friction stir processing , 2018, Composites Communications.

[4]  H. Sharifi,et al.  Dry sliding wear behavior of open-cell Al-Mg/Al2O3 and Al-Mg/SiC-Al2O3 composite preforms produced by a pressureless infiltration technique , 2017 .

[5]  Jing-fu Li,et al.  Effects of environment on dry sliding wear behavior of silver–copper based composites containing tungsten disulfide , 2017 .

[6]  T. Thankachan,et al.  Parametric optimization of dry sliding wear loss of copper–MWCNT composites , 2017 .

[7]  C. Ramesh,et al.  Effect of carbon nanotube and silicon carbide on microstructure and dry sliding wear behavior of copper hybrid nanocomposites , 2016 .

[8]  K. Zhou,et al.  Sliding wear behavior of copper-based composites reinforced with graphene nanosheets and graphite , 2015 .

[9]  Hong Huang,et al.  Tribological properties of copper-based composites with copper coated NbSe2 and CNT , 2015 .

[10]  Ping Huang,et al.  Dry Sliding Wear Studies of Copper-Based Powder Metallurgy Brake Materials , 2014 .

[11]  M. Uthayakumar,et al.  Wear Studies on SiC and Fly Ash Reinforced Copper Based Composites by Grey Relational Analysis , 2014 .

[12]  J. Cano,et al.  Structure-fracture properties relationship for Polypropylene reinforced with fly ash with and without maleic anhydride functionalized isotactic Polypropylene as coupling agent , 2014 .

[13]  A. Elaya Perumal,et al.  Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites , 2013 .

[14]  Zhigang Zang,et al.  All-optical switching in Sagnac loop mirror containing an ytterbium-doped fiber and fiber Bragg grating. , 2013, Applied optics.

[15]  Bheemappa Suresha,et al.  Grey-based Taguchi approach for wear assessment of SiC filled carbon–epoxy composites , 2012 .

[16]  I. Murthy,et al.  Mechanical properties and corrosion behaviour of fly ash particles reinforced AA 2024 composites , 2012 .

[17]  G. Kumar,et al.  Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles , 2012 .

[18]  M. Barsoum,et al.  On the tribology of the MAX phases and their composites during dry sliding: A review , 2011 .

[19]  R. Keshavamurthy,et al.  A study on microstructure and mechanical properties of Al 6061–TiB2 in-situ composites , 2011 .

[20]  J. Cano,et al.  Rheological, thermal, and mechanical characterization of fly ash-thermoplastic composites with different coupling agents , 2010 .

[21]  A. Ahamed,et al.  Development of Al 6063–TiB2 in situ composites , 2010 .

[22]  M. V. Deepthi,et al.  Mechanical and thermal characteristics of high density polyethylene-fly ash Cenospheres composites , 2010 .

[23]  K. Sivaprasad,et al.  Microstructure and mechanical properties of fly ash particle reinforced AA6061 composites produced by press and extrusion , 2009 .

[24]  Kishore,et al.  Investigations on the influence of graphite filler on dry sliding wear and abrasive wear behaviour of carbon fabric reinforced epoxy composites , 2009 .

[25]  K. Sivaprasad,et al.  Sliding wear behaviour of Al 6063/TiB2 in situ composites at elevated temperatures , 2009 .

[26]  A. Raju,et al.  Preparation and Properties of Sintered Copper–Tin Composites Containing Copper Coated or Uncoated Fly Ash , 2008 .

[27]  A. Al-Qutub,et al.  Wear and friction of Al–Al2O3 composites at various sliding speeds , 2008 .

[28]  B. Kieback,et al.  Interfacial design of Cu-based composites prepared by powder metallurgy for heat sink applications , 2008 .

[29]  Di Zhang,et al.  Production of Boron Carbide Reinforced 2024 Aluminum Matrix Composites by Mechanical Alloying , 2007 .

[30]  S. Tjong,et al.  Mechanical and thermal expansion behavior of hipped aluminum–TiB2 composites , 2006 .

[31]  W. M. Rainforth.  The wear behaviour of oxide ceramics-A Review , 2004 .

[32]  P. Shipway,et al.  Reaction synthesis of Cu-TiCx master-alloys for the production of copper-based composites , 2004 .

[33]  K. Tandon,et al.  Microstructural characterization of mechanically mixed layer and wear debris in sliding wear of an Al alloy and an Al based composite , 2000 .

[34]  M. Gupta,et al.  In situ preparation of TiB2 reinforced Al based composites , 1998 .

[35]  E. Gibson,et al.  Sliding wear behavior of deformation-processed Cu-15vol.%Cr in situ composites , 1996 .

[36]  N. Hutzler,et al.  Quantitative Mineral Determinations of Industrial Coal Ash , 1993 .

[37]  F. J. Carignan,et al.  Observations on the Sliding Wear of Ceramics , 1985 .