Optimal design of distillation column using three dimensional exergy analysis curves

This paper presents two main contributions. Firstly, a new exergy graphical method is proposed for optimal design of distillation column with minimum exergy lost. The method is applicable to both grass-root and retrofit cases, respectively. The effect of design and operating parameters of a distillation column on the exergy lost is graphically visualized by three dimensional exergy analysis curves. The curve shows the correlations between exergy lost, design and operating parameters of a distillation column. This technique can be used as an effective method to reduce the simulation effort to search for the optimum design and operating parameters of a distillation column at minimum exergy lost. Besides, visualization also enhances the engineers’ understanding of the column performance. The other contribution is a four-level idealization concept, which is based on three dimensional graphical exergy analysis curves. The concept defines the effect of transport rate and configuration on exergy lost of distillation column. The effectiveness of the method has been demonstrated on a xylene column, which suggested that an implementation of feed pre-heater yields a significant reduction in exergy lost by up to 15.5%.

[1]  Arief Budiman,et al.  A new method for disclosing internal phenomena in a distillation column by use of material-utilization diagram , 2004 .

[2]  P. S. Buckley,et al.  Design of Distillation Column Control Systems , 1985 .

[3]  B. Suphanit,et al.  Exergy loss analysis of heat transfer across the wall of the dividing-wall distillation column , 2007 .

[4]  D.-J. Kim,et al.  Exergetic and thermoeconomic analyses of power plants , 2003 .

[5]  Hsuan Chang,et al.  A new exergy method for process analysis and optimization , 2005 .

[6]  Adrian Bejan,et al.  Exergy analysis of energy conversion during the thermal interaction between hot particles and water , 1998 .

[7]  Marc A. Rosen,et al.  Second-law analysis of aquifer thermal energy storage systems , 1999 .

[8]  Hsuan Chang,et al.  Process analysis using the concept of intrinsic and extrinsic exergy losses , 2003 .

[9]  Tatiana Morosuk,et al.  New proposal in the thermodynamic analysis of complex heat regeneration systems , 2004 .

[10]  J. Segovia,et al.  Low-grade coal and biomass co-combustion on fluidized bed: exergy analysis. , 2006 .

[11]  Ho-Young Kwak,et al.  Exergoeconomic analysis of thermal systems , 1998 .

[12]  Qunxiong Zhu,et al.  Design and control of an ideal heat-integrated distillation column (ideal HIDIC) system separating a close-boiling ternary mixture , 2007 .

[13]  Signe Kjelstrup,et al.  The second law optimal state of a diabatic binary tray distillation column , 2005 .

[14]  G. Tsatsaronis,et al.  A new approach to the exergy analysis of absorption refrigeration machines , 2008 .

[15]  Arief Budiman,et al.  Three-dimensional graphical exergy analysis of a distillation column , 1996 .

[16]  A. Araújo,et al.  Exergetic analysis of distillation processes—A case study , 2007 .

[17]  N. Lior,et al.  The theory and practice of energy saving in the chemical industry: some methods for reducing thermodynamic irreversibility in chemical technology processes , 2003 .

[18]  Nobuhiro Maruoka,et al.  Exergy recovery from steelmaking off-gas by latent heat storage for methanol production , 2006 .

[19]  Ricardo Rivero,et al.  Exergy and exergoeconomic analysis of a crude oil combined distillation unit , 2004 .

[20]  D. A. Rasheva,et al.  Exergy efficiency evaluation of the production of sulfuric acid from liquid sulfur , 2002 .

[21]  Masaru Ishida,et al.  Application of energy-utilization diagram for graphic exergy analysis of multicomponent distillation columns , 1992 .

[22]  Peter Harriott,et al.  Unit Operations of Chemical Engineering , 2004 .

[23]  D. Y. Goswami,et al.  A combined power and cooling cycle modified to improve resource utilization efficiency using a distillation stage , 2006 .

[24]  Ricardo Rivero.  Application of the exergy concept in the petroleum refining and petrochemical industry , 2002 .

[25]  George Tsatsaronis,et al.  ON AVOIDABLE AND UNAVOIDABLE EXERGY DESTRUCTIONS AND INVESTMENT COSTS IN THERMAL SYSTEMS , 2002 .

[26]  R. Rivero,et al.  Simulation, exergy analysis and application of diabatic distillation to a tertiary amyl methyl ether production unit of a crude oil refinery , 2004 .

[27]  Zengliang Gao,et al.  Avoidable thermodynamic inefficiencies and costs in an externally fired combined cycle power plant , 2006 .

[28]  Ricardo Rivero.  Exergy simulation and optimization of adiabatic and diabatic binary distillation , 2001 .

[29]  K. Wark,et al.  Advanced thermodynamics for engineers , 1994 .

[30]  Xiao Feng,et al.  Allocation of cumulative exergy in multiple product separation processes , 2007 .