Improvement of sound absorption and flexural compliance of porous alumina-mullite ceramics by engineering the microstructure and segmentation into topologically interlocked blocks

Abstract Ceramic plates composed of topologically interlocked osteomorphic blocks with mono- and bimodal pore size distributions are fabricated by combining freeze gelation and sacrificial templating and trialled for sound absorption. These blocks present a concavo-convex geometry that constrains their movement solely by the contact with the neighbors. Our studies show that by using porous osteomorphic blocks, enhanced sound absorption coefficient (α) of 0.97 at 420 Hz can be reached, indicating that the gaps between blocks have a significant effect on the sound absorption at frequencies lower than 600 Hz, whereas the bimodal porosity of the block material enhances sound absorption for higher frequencies. Indentation tests confirm the advantages of the topologically interlocked structures, such as a spectacularly high flexural compliance, as compared to monolithic parts made from the same material. We concluded that materials design based on topological interlocking leads to an excellent combination of mechanical and sound absorption properties.

[1]  Franck Sgard,et al.  On the use of perforations to improve the sound absorption of porous materials , 2005 .

[2]  Yuri Estrin,et al.  Damping properties of an assembly of topologically interlocked cubes , 2009 .

[3]  Elena Pasternak,et al.  Topological interlocking of platonic solids: A way to new materials and structures , 2003 .

[4]  Arcady Dyskin,et al.  Mortarless structures based on topological interlocking , 2012 .

[5]  C. Baudín,et al.  Mechanical properties of mullite materials , 1996 .

[6]  J. Ferreira,et al.  Fabrication of Highly Porous Mullite Materials , 2005 .

[7]  Hoda S. Seddeq,et al.  Factors Influencing Acoustic Performance of Sound Absorptive Materials , 2009 .

[8]  Elena Pasternak,et al.  A new concept in design of materials and structures: assemblies of interlocked tetrahedron-shaped elements , 2001 .

[9]  Arcady Dyskin,et al.  Toughening by Fragmentation—How Topology Helps , 2001 .

[10]  T. Ohji,et al.  Fabrication and characterization of highly porous mullite ceramics , 2003 .

[11]  Elena Pasternak,et al.  Fracture Resistant Structures Based on Topological Interlocking with Non‐planar Contacts , 2003 .

[12]  Elena Pasternak,et al.  Topological interlocking as a material design concept , 2011 .

[13]  L. Hervella-Nieto,et al.  Review in Sound Absorbing Materials , 2008 .

[14]  Elena Pasternak,et al.  Percolation mechanism of failure of a planar assembly of interlocked osteomorphic elements , 2007 .

[15]  Raymond J. Cipra,et al.  Transverse loading of cellular topologically interlocked materials , 2012 .

[16]  Yuri Estrin,et al.  Enhancement of sound absorption properties using topologically interlocked elements , 2012 .

[17]  K. Rezwan,et al.  Near-Net-Shaped Porous Ceramics for Potential Sound Absorption Applications at High Temperatures , 2013 .

[18]  Eduardo Saiz,et al.  Architectural Control of Freeze‐Cast Ceramics Through Additives and Templating , 2009, 1710.04095.

[19]  André R. Studart,et al.  Processing Routes to Macroporous Ceramics: A Review , 2006 .

[20]  Sylvain Deville,et al.  Freeze-Casting of Porous Ceramics: A Review of Current Achievements and Issues , 2008, 1710.04201.

[21]  Arcady Dyskin,et al.  A new principle in design of composite materials: reinforcement by interlocked elements , 2003 .

[22]  J. Hermann,et al.  Combination of Active Instability Control and Passive Measures to Prevent Combustion Instabilities in a 260MW Heavy Duty Gas Turbine , 2001 .

[23]  G. Frank,et al.  A Novel Production Method for Porous Sound‐Absorbing Ceramic Material for High‐Temperature Applications , 2011 .

[24]  Raymond J. Cipra,et al.  Structural integrity during remanufacture of a topologically interlocked material , 2012 .

[25]  Dietmar Koch,et al.  Mechanical Properties of Topologically Interlocked Structures with Elements Produced by Freeze Gelation of Ceramic Slurries , 2012 .

[26]  Paul Duval,et al.  Indentation Behaviour of Interlocked Structures Made of Ice: Influence of the Friction Coefficient , 2007 .