Comparing Optimization Schemes for Solving Case Studies with Multiple Heat Exchangers Using High-Order Pinch Point Temperature Difference Methods

[1]  S. Jackson,et al.  UA and pinch point temperature difference modeling - Finding the best heat exchanger schemes , 2023, Comput. Chem. Eng..

[2]  Jianxin Xu,et al.  Thermal-economy optimization for single/dual/triple-pressure HRSG of gas-steam combined cycle by multi-objective genetic algorithm , 2022, Energy Conversion and Management.

[3]  A. Mitsos,et al.  Simultaneous deterministic global flowsheet optimization and heat integration: Comparison of formulations , 2022, Comput. Chem. Eng..

[4]  Jie Li,et al.  Novel feasible path optimisation algorithms using steady-state and/or pseudo-transient simulations , 2020, Comput. Chem. Eng..

[5]  C. Hui,et al.  A shortcut method for simultaneous energy and heat exchange area optimization with variable stream conditions , 2020 .

[6]  R. Venkata Rao,et al.  Design Optimization of Heat Exchangers with Advanced Optimization Techniques: A Review , 2020, Archives of Computational Methods in Engineering.

[7]  Eivind Brodal,et al.  Optimization study of heat pumps using refrigerant blends – Ejector versus expansion valve systems , 2020, International Journal of Refrigeration.

[8]  Liya Ren,et al.  Optimization and Comparison of Two Combined Cycles Consisting of CO2 and Organic Trans-Critical Cycle for Waste Heat Recovery , 2020, Energies.

[9]  Steve Jackson,et al.  Performance and design study of optimized LNG Mixed Fluid Cascade processes , 2019 .

[10]  Argimiro Resende Secchi,et al.  Integrating pinch analysis and process simulation within equation-oriented simulators , 2019, Comput. Chem. Eng..

[11]  S. Jackson,et al.  A comparative study of CO2 heat pump performance for combined space and hot water heating , 2019, International Journal of Refrigeration.

[12]  Z. Ayub,et al.  Literature survey and a universal evaporation correlation for plate type heat exchangers , 2019, International Journal of Refrigeration.

[13]  Cheng Chen,et al.  Analysis and optimisation of a mixed fluid cascade (MFC) process , 2017 .

[14]  T. Gundersen,et al.  Heat and work integration: Fundamental insights and applications to carbon dioxide capture processes , 2016 .

[15]  Miguel J. Bagajewicz,et al.  Global optimization of heat exchanger networks using a new generalized superstructure , 2016 .

[16]  Reinhard Radermacher,et al.  A survey of correlations for heat transfer and pressure drop for evaporation and condensation in plate heat exchangers , 2016 .

[17]  Paul I. Barton,et al.  Multistream heat exchanger modeling and design , 2015 .

[18]  Hua Tian,et al.  Thermodynamic performance assessment of carbon dioxide blends with low-global warming potential (GWP) working fluids for a heat pump water heater ☆ , 2015 .

[19]  E. H. Chimowitz,et al.  An algorithm for optimal waste heat recovery from chemical processes , 2015, Comput. Chem. Eng..

[20]  Luis M. Romeo,et al.  Efficiency improvement strategies for the feedwater heaters network designing in supercritical coal-fired power plants , 2014 .

[21]  Truls Gundersen,et al.  Annotated bibliography - Use of optimization in LNG process design and operation , 2014, Comput. Chem. Eng..

[22]  Vincent Lemort,et al.  Pure and Pseudo-pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp , 2014, Industrial & engineering chemistry research.

[23]  Z. Xue.  Preface , 2011 .

[24]  Denis Clodic,et al.  Multi-objective optimization of a multi water-to-water heat pump system using evolutionary algorithm , 2011 .

[25]  Eric W. Lemmon,et al.  Thermodynamic Properties of Propane. III. A Reference Equation of State for Temperatures from the Melting Line to 650 K and Pressures up to 1000 MPa , 2009 .

[26]  Louis Gosselin,et al.  Optimizing heat exchanger networks with genetic algorithms for designing each heat exchanger including condensers , 2009 .

[27]  Jahar Sarkar,et al.  Assessment of blends of CO2 with butane and isobutane as working fluids for heat pump applications , 2009 .

[28]  Predrag Stojan Hrnjak,et al.  Experimental validation of a prototype ejector designed to reduce throttling losses encountered in transcritical R744 system operation , 2008 .

[29]  L. Shampine.  Vectorized adaptive quadrature in MATLAB , 2008 .

[30]  James Kennedy,et al.  Particle swarm optimization , 2002, Proceedings of ICNN'95 - International Conference on Neural Networks.

[31]  Jorge Nocedal,et al.  An Interior Point Algorithm for Large-Scale Nonlinear Programming , 1999, SIAM J. Optim..

[32]  W. Wagner,et al.  A New Equation of State for Carbon Dioxide Covering the Fluid Region from the Triple‐Point Temperature to 1100 K at Pressures up to 800 MPa , 1996 .

[33]  H. Baehr,et al.  An International Standard Formulation for the Thermodynamic Properties of 1,1,1,2‐Tetrafluoroethane (HFC‐134a) for Temperatures from 170 K to 455 K and Pressures up to 70 MPa , 1994 .

[34]  John R. Flower,et al.  Synthesis of heat exchanger networks: I. Systematic generation of energy optimal networks , 1978 .

[35]  D. Shanno.  Conditioning of Quasi-Newton Methods for Function Minimization , 1970 .

[36]  Easa I. Al-musleh,et al.  Towards improved and multi-scale liquefied natural gas supply chains: Thermodynamic analysis , 2021, Comput. Chem. Eng..

[37]  Peter Spellucci,et al.  A new technique for inconsistent QP problems in the SQP method , 1998, Math. Methods Oper. Res..

[38]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[39]  Ignacio E. Grossmann,et al.  Simultaneous optimization and heat integration of chemical processes , 1986 .

[40]  John A. Nelder,et al.  A Simplex Method for Function Minimization , 1965, Comput. J..