Life cycle assessment of repurposed waste electric and electronic equipment in comparison with original equipment

Abstract Reuse is considered as a priority alternative for the management of Waste from Electrical and Electronic Equipment (WEEE). The reason is that it is thought that reuse always has a lower environmental impact. However, few studies have evaluated in detail the environmental impacts of reuse, and even fewer have analysed cases of reuse for a purpose other than the original one. In this study, life cycle assessment (LCA) following the ISO 14040 standard, was employed to assess the environmental impacts of two preparing for reuse processes of desktop computer considered as WEEE, whose results were repurposed products with industrial application: a programmable logic controller (PLC) and a perimeter security system (PSA). These scenarios were compared with other equivalents in which the products come from virgin raw materials. The results showed a worse environmental performance of repurposed PLC than one original, due mainly to differences in distribution and use stages. The greater weight, the shorter lifespan and mainly the higher operating power were responsible for the greater negative effects of the reuse scenario. However, repurposed PSA has a lower negative impact than original equipment in all environmental categories analysed. This was mainly due to its lower operating power and also not having demanding technical characteristics. Therefore, in this case, the usage profile, the composition and the lifespan can be considered as the main factors that determine the environmental advantage of repurposed products. The main conclusion of this work is that the environmental viability of the reuse of WEEE depends on the existing commercial alternatives for the application of the new product obtained; being one of the main factors the power consumption and the lifespan. This constitutes an important aspect to take into account when developing regulations, strategies and policies to prevent the implementation of WEEE management systems with environmental impacts greater than other alternatives. Further, the specific information about environmental performance of repurposing can contribute to the development of new processes of preparing for reuse. In this way, the commercialization of new products from these processes is favoured, which contributes to improving the environmental management of WEEE and the development of the circular economy.

[1]  Sarah J. Cowell,et al.  Extended Producer Responsibility for Waste Electronics: An Example of Printer Recycling in the United Kingdom , 2005 .

[2]  Valeria Ibáñez-Forés,et al.  Potential reuse of small household waste electrical and electronic equipment: Methodology and case study. , 2016, Waste management.

[3]  N. Saccani,et al.  Circular Economy in the WEEE industry: a systematic literature review and a research agenda , 2020 .

[4]  Fernanda Andreola,et al.  Cathode ray tube glass recycling: an example of clean technology , 2005, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[5]  Hang-Sik Shin,et al.  Life Cycle Assessment of a Personal Computer and its Effective Recycling Rate (7 pp) , 2006 .

[6]  Martin P. Foster,et al.  Repurposing ATX Power Supply for Battery Charging Applications , 2016 .

[7]  Fabrice Mathieux,et al.  Life Cycle Assessment of repurposed electric vehicle batteries: an adapted method based on modelling energy flows , 2018, Journal of Energy Storage.

[8]  Patrick Wäger,et al.  Does WEEE recycling make sense from an environmental perspective?: The environmental impacts of the Swiss take-back and recycling systems for waste electrical and electronic equipment (WEEE) , 2005 .

[9]  Xianlai Zeng,et al.  The life cycle assessment of an e-waste treatment enterprise in China , 2013 .

[10]  Paul Teehan,et al.  Sources of Variation in Life Cycle Assessments of Desktop Computers , 2012 .

[11]  I. Pulford.  Waste Electrical and Electronic Equipment (WEEE) , 2013 .

[12]  Winifred Ijomah,et al.  Technical solutions to improve global sustainable management of waste electrical and electronic equipment (WEEE) in the EU and China , 2016 .

[13]  Helmut Rechberger,et al.  Contribution to resource conservation by reuse of electrical and electronic household appliances , 2006 .

[14]  Venkatesh Akella,et al.  Comparative life cycle assessment of smartphone reuse: repurposing vs. refurbishment , 2014, The International Journal of Life Cycle Assessment.

[15]  S. Abuzed,et al.  Second life of computer power supplies in PV battery charging applications , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[16]  Pascal Maussion,et al.  Life cycle assessment for a solar energy system based on reuse components for developing countries , 2019, Journal of Cleaner Production.

[17]  Deborah L Thurston,et al.  E-Waste Stream Analysis and Design Implications , 2011 .

[18]  L Biganzoli,et al.  Mass balance and life cycle assessment of the waste electrical and electronic equipment management system implemented in Lombardia Region (Italy). , 2015, The Science of the total environment.

[19]  Wolfgang Grimm,et al.  Reuse of Electric Motors in Consumer Products , 1998 .

[20]  Wahidul K. Biswas,et al.  Sustainability Assessment of Remanufactured Computers , 2016 .

[21]  C. Fitzpatrick,et al.  Success factors and barriers in re-use of electrical and electronic equipment , 2013 .

[22]  Evaluating the sustainability potential of a white goods refurbishment program , 2013, Sustainability Science.

[23]  Anand Jaiswal,et al.  Go Green with WEEE: Eco-friendly approach for handling e- waste , 2015 .

[24]  Lihui Wang,et al.  Reusability based on Life Cycle Sustainability Assessment: Case Study on WEEE☆ , 2014 .

[25]  Mette Mosgaard,et al.  Constraints and opportunities for integrating preparation for reuse in the Danish WEEE management system , 2018, Resources, Conservation and Recycling.

[26]  Julie M. Schoenung,et al.  Environmental and economic evaluation of cathode ray tube (CRT) funnel glass waste management options in the United States , 2013 .

[27]  Jinglan Hong,et al.  Life cycle assessment of electronic waste treatment. , 2015, Waste management.

[28]  Rita Gamberini,et al.  On the integration of planning and environmental impact assessment for a WEEE transportation network—A case study , 2010 .

[29]  Eric Williams,et al.  Energy analysis of end-of-life options for personal computers: resell, upgrade, recycle , 2003, IEEE International Symposium on Electronics and the Environment, 2003..

[30]  B. Glazebrook,et al.  An integrated life cycle assessment and cost analysis of the implications of implementing the proposed waste from electrical and electronic equipment (WEEE) directive , 2000, Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment (Cat. No.00CH37082).

[31]  Alastair Buckley,et al.  Repurposing of ATX computer power supplies for PV applications in developing countries , 2013, 2013 International Conference on Renewable Energy Research and Applications (ICRERA).

[32]  Colin Fitzpatrick,et al.  Repurposing end of life notebook computers from consumer WEEE as thin client computers – A hybrid end of life strategy for the Circular Economy in electronics , 2018, Journal of Cleaner Production.

[33]  R.J. Caudill,et al.  Sustainability and end-of-life product management: a case study of electronics collection scenarios , 2004, IEEE International Symposium on Electronics and the Environment, 2004. Conference Record. 2004.

[34]  Azadeh Dindarian,et al.  Reuse of EEE/WEEE in UK: Review on functionality of EEE/WEEE at the point of disposal , 2011, Proceedings of the 2011 IEEE International Symposium on Sustainable Systems and Technology.

[35]  Daniel R. Cooper,et al.  The Environmental Impacts of Reuse: A Review , 2017 .

[36]  Bin Lu,et al.  The environmental impact of technology innovation on WEEE management by Multi-Life Cycle Assessment , 2015 .

[37]  Atsushi Terazono,et al.  Reuse of secondhand TVs exported from Japan to the Philippines. , 2010, Waste management.

[38]  P A Wäger,et al.  Environmental impacts of the Swiss collection and recovery systems for Waste Electrical and Electronic Equipment (WEEE): a follow-up. , 2011, The Science of the total environment.

[39]  Dennis Brandão,et al.  Utilization of Life Cycle Assessment methodology to compare two strategies for recovery of copper from printed circuit board scrap , 2014 .

[40]  Casper Boks,et al.  Quotes for environmentally weighted recyclability (QWERTY): Concept of describing product recyclability in terms of environmental value , 2003 .

[41]  Wim Dewulf,et al.  The eco-efficiency of reuse centres critically explored – the washing machine case , 2006 .

[42]  Mohammad Nazrul Islam,et al.  A comparison of repaired, remanufactured and new compressors used in Western Australian small- and medium-sized enterprises in terms of global warming , 2013 .

[43]  Guilherme Marcelo Zanghelini,et al.  Waste management Life Cycle Assessment: the case of a reciprocating air compressor in Brazil , 2014 .

[44]  Scott O'Connell,et al.  Product carbon footprint (PCF) assessment of Dell laptop - Results and recommendations , 2010, Proceedings of the 2010 IEEE International Symposium on Sustainable Systems and Technology.

[45]  T. Cooper,et al.  Enhancing reuse and resource recovery of electrical and electronic equipment with reverse logistics to meet carbon reduction targets , 2018 .

[46]  Joyce Smith Cooper,et al.  A life cycle assessment of end-of-life computer monitor management in the Seattle metropolitan region , 2011 .

[47]  S. Sahni,et al.  Reusing personal computer devices - good or bad for the environment? , 2010, Proceedings of the 2010 IEEE International Symposium on Sustainable Systems and Technology.

[48]  S. Jena,et al.  Sustainability through remanufacturing of e-waste: Examination of critical factors in the Indian context , 2019, Sustainable Production and Consumption.

[49]  Jacqueline M. Bloemhof,et al.  An Analysis of the Eco-Efficiency of Remanufactured Personal Computers and Mobile Phones , 2012 .