Positioning accuracy characterization of assembled microscale components for micro-optical benches
暂无分享,去创建一个
[1] Dan O. Popa,et al. Precise Motion Control of a Piezoelectric Microgripper for Microspectrometer Assembly , 2009 .
[2] Pierre De Lit,et al. A four‐degree‐of‐freedom microprehensile microrobot on chip , 2004 .
[3] Hans Zappe,et al. Fiber optic tunable probe for endoscopic optical coherence tomography , 2008 .
[4] Ning Tan,et al. Calibration and validation of XYΘ micropositioners with vision , 2012, 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).
[5] Stéphane Régnier,et al. Microrobotics for Micromanipulation. , 2010 .
[6] Philippe Lutz,et al. Current integration force and displacement self-sensing method for cantilevered piezoelectric actuators. , 2009, The Review of scientific instruments.
[7] Quan Zhou,et al. Hybrid Microassembly Combining Robotics and Water Droplet Self-Alignment , 2010, IEEE Transactions on Robotics.
[8] Philippe Lutz,et al. Towards micro-assembly of hybrid MOEMS components on a reconfigurable silicon free-space micro-optical bench , 2010 .
[9] Harry E. Stephanou,et al. A Multiscale Assembly and Packaging System for Manufacturing of Complex Micro-Nano Devices , 2012, IEEE Transactions on Automation Science and Engineering.
[10] A. Seifert,et al. Scanning and Tunable Micro-Optics for Endoscopic Optical Coherence Tomography , 2011, Journal of Microelectromechanical Systems.
[11] F. Santoyo,et al. Modal vibration analysis of a metal plate by using a laser vibrometer and the POD method , 2005 .
[12] Ning Tan,et al. Calibration of single-axis nanopositioning cell subjected to thermal disturbance , 2013, 2013 IEEE International Conference on Robotics and Automation.
[13] Philippe Lutz,et al. Complete Open Loop Control of Hysteretic, Creeped, and Oscillating Piezoelectric Cantilevers , 2010, IEEE Transactions on Automation Science and Engineering.
[14] W. Cleghorn,et al. Microassembly of 3-D microstructures using a compliant, passive microgripper , 2004, Journal of Microelectromechanical Systems.
[15] Brahim Tamadazte,et al. Robotic Micromanipulation and Microassembly Using Monoview and Multiscale Visual Servoing , 2011, IEEE/ASME Transactions on Mechatronics.
[16] Philippe Lutz,et al. Automated Guiding Task of a Flexible Micropart Using a Two-Sensing-Finger Microgripper , 2013, IEEE Transactions on Automation Science and Engineering.
[17] Fumihito Arai,et al. Prototyping design and automation of micro/nano manipulation system , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).
[18] C. Clevy,et al. A micro-assembly station used for 3D reconfigurable hybrid MOEMS assembly , 2009, 2009 IEEE International Symposium on Assembly and Manufacturing.
[19] Micky Rakotondrabe,et al. Signal Measurement and Estimation Techniques for Micro and Nanotechnology. , 2011 .
[20] Mark J. Jackson,et al. Commercializing Micro-Nanotechnology Products , 2007 .
[21] Harry E. Stephanou,et al. High Yield Automated MEMS Assembly , 2007, 2007 IEEE International Conference on Automation Science and Engineering.
[22] Philippe Lutz,et al. Modular and Reconfigurable 3D Micro-Optical Benches: Concept, Validation, and Characterization , 2011 .
[23] Philippe Lutz,et al. Robotic microassembly and micromanipulation at FEMTO-ST , 2013 .
[24] Philippe Lutz,et al. Hybrid force/position control applied to automated guiding tasks at the microscale , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[25] H. Miyazaki,et al. Microassembly of semiconductor three-dimensional photonic crystals , 2003, Nature materials.
[26] Adha Imam Cahyadi,et al. Robotic Micro-Assembly , 2012 .
[27] Yingtian Pan,et al. MEMS-based Endoscopic Optical Coherence Tomography , 2004 .