Experimental study on an integrated collector storage solar air heater based on flat micro-heat pipe arrays

Abstract This study investigated the performance of an integrated collector storage solar air heater based on latent heat storage and flat micro-heat pipe arrays. The structure and working principle of the device were explained in detail. The effective area of the collector is 0.93 m 2 , and the mass of the phase change material (PCM) is 45.8 kg. An integrated collector storage experimental system was set up, and outdoor experiments were conducted to demonstrate the feasibility of the device for energy storage and air heating. The temperature distribution of the PCM was recorded during charging and discharging to monitor the propagation of the melting and freezing front. Efficiency and power during charging and discharging were also calculated. The integrative device exhibited 59% and 91.6% efficiencies for solar air charging and discharging at 393 and 344 W power, respectively.

[1]  John Currie,et al.  Integrated collector storage solar water heater: Temperature stratification , 2009 .

[2]  E. Mettawee,et al.  Experimental study of a compact PCM solar collector , 2006 .

[3]  S. O. Enibe,et al.  Thermal analysis of a natural circulation solar air heater with phase change material energy storage , 2003 .

[4]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[5]  S. Devahastin,et al.  Use of latent heat storage to conserve energy during drying and its effect on drying kinetics of a food product , 2006 .

[6]  Spiros Papaefthimiou,et al.  Integrated collector storage solar water heaters: survey and recent developments , 2015, Energy Systems.

[7]  K. Sagara,et al.  Latent Heat Storage Materials and Systems: A Review , 2005 .

[8]  S. Himran,et al.  Characterization of Alkanes and Paraffin Waxes for Application as Phase Change Energy Storage Medium , 1994 .

[9]  R. Velraj,et al.  Experimental investigation on phase change material based thermal storage system for solar air heating applications , 2013 .

[10]  Daniel Chemisana,et al.  Experimental study of integrated collector storage solar water heaters , 2013 .

[11]  Marc A. Rosen,et al.  Comparative performance investigation of integrated collector‐storage solar water heaters with various heat loss reduction strategies , 2011 .

[12]  Mervyn Smyth,et al.  Heat retaining integrated collector/storage solar water heaters , 2003 .

[13]  Cemil Alkan,et al.  Enthalpy of melting and solidification of sulfonated paraffins as phase change materials for thermal energy storage , 2006 .

[14]  David Faiman,et al.  Reducing the heat loss at night from solar water heaters of the integrated collector-storage variety , 2001 .

[15]  Mervyn Smyth,et al.  Integrated collector storage solar water heaters , 2006 .

[16]  Wasim Saman,et al.  Thermal performance of PCM thermal storage unit for a roof integrated solar heating system , 2005 .

[17]  Sukhmeet Singh,et al.  Low cost solar air heater , 2012 .

[18]  Kamaruzzaman Sopian,et al.  Review of thermal energy storage for air conditioning systems , 2012 .

[19]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[20]  Deng Yuechao.  Heat transfer characteristics of flat micro-heat pipe array , 2011 .

[21]  S. Kanev,et al.  Thermophysical properties of some paraffins applicable to thermal energy storage , 1992 .

[22]  N. D. Kaushika,et al.  Comparative study of transparent insulation materials cover systems for integrated-collector-storage solar water heaters , 1999 .

[23]  Mervyn Smyth,et al.  Annual performance of heat retaining integrated collector/storage solar water heaters in a northern maritime climate , 2001 .

[24]  N. K. Bansal,et al.  Performance equations of a collector cum storage system using phase change materials , 1992 .