Nanocomposites of PLA containing ZnO nanofibers made by solvent cast 3D printing: Production and characterization

[1]  Xue Yan,et al.  PII: 0010-4485(95)00035-6 , 2003 .

[2]  M. G. Norton,et al.  Practical Aspects of X-Ray Diffraction , 1998 .

[3]  Charles A. Wilkie,et al.  Photo-oxidation of polymeric-inorganic nanocomposites: chemical, thermal stability and fire retardancy investigations , 2001 .

[4]  S. Ray,et al.  Biodegradable Polylactide and Its Nanocomposites: Opening a New Dimension for Plastics and Composites , 2003 .

[5]  Douglas E. Hirt,et al.  Modification of poly(lactic acid) films: Enhanced wettability from surface-confined photografting and increased degradation rate due to an artifact of the photografting process , 2004 .

[6]  Yao Wang,et al.  Effects of organic nucleating agents and zinc oxide nanoparticles on isotactic polypropylene crystallization , 2004 .

[7]  T. Emrick,et al.  Impact of Surface-Modified Nanoparticles on Glass Transition Temperature and Elastic Modulus of Polymer Thin Films , 2007 .

[8]  J. Nie,et al.  Preparation of gelatin/PVA nanofibers and their potential application in controlled release of drugs , 2007 .

[9]  Masatoshi Matsuda,et al.  Crystallization and Melting Behavior of Poly (l-lactic Acid) , 2007 .

[10]  Y. Inoue,et al.  Effect of crystallization temperature on crystal modifications and crystallization kinetics of poly(L-lactide) , 2008 .

[11]  Angela M. Harris,et al.  Improving mechanical performance of injection molded PLA by controlling crystallinity , 2008 .

[12]  Y. Ono,et al.  Melting behavior of poly(l-lactic acid): X-ray and DSC analyses of the melting process , 2008 .

[13]  L. Lim,et al.  Processing technologies for poly(lactic acid) , 2008 .

[14]  Y. Qiu,et al.  Crystallization and Mechanical Properties of Nano ZnO/PP/PLA Composite Filaments , 2009 .

[15]  Yulong Ding,et al.  Ultrasound-assisted green synthesis of nanocrystalline ZnO in the ionic liquid [hmim][NTf2]. , 2009, Ultrasonics sonochemistry.

[16]  G. Wegner,et al.  Investigation of Oxygen Permeation through Composites of PMMA and Surface-Modified ZnO Nanoparticles. , 2009, Macromolecular rapid communications.

[17]  Ana C. Soria,et al.  Effect of ultrasound on the technological properties and bioactivity of food: a review. , 2010 .

[18]  C. Migliaresi,et al.  Interplay of kinetics and interfacial interactions in breath figure templating – A phenomenological interpretation , 2010 .

[19]  R. Auras,et al.  Effects of synthetic and natural zeolites on morphology and thermal degradation of poly(lactic acid) composites , 2010 .

[20]  P. Dubois,et al.  High-performance polylactide/ZnO nanocomposites designed for films and fibers with special end-use properties. , 2011, Biomacromolecules.

[21]  M. Arai,et al.  Ultrasound assisted additive free synthesis of nanocrystalline zinc oxide. , 2011, Ultrasonics sonochemistry.

[22]  J. Rhim.  Preparation and characterization of vacuum sputter silver coated PLA film , 2013 .

[23]  D. Therriault,et al.  Solvent-cast three-dimensional printing of multifunctional microsystems. , 2013, Small.

[24]  A. Rajulu,et al.  Structure and properties of poly (lactic acid)/Sterculia urens uniaxial fabric biocomposites. , 2013, Carbohydrate polymers.

[25]  G. Chadeyron,et al.  Influence of functional nanoparticles on the photostability of polymer materials: Recent progress and further applications , 2013 .

[26]  P. Dubois,et al.  PLA-ZnO nanocomposite films: Water vapor barrier properties and specific end-use characteristics , 2013 .

[27]  D. Paneva,et al.  Electrospinning/electrospraying vs. electrospinning: A comparative study on the design of poly(l-lactide)/zinc oxide non-woven textile , 2014 .

[28]  R. Farnood,et al.  Fabrication and characterization of fully biodegradable natural fiber-reinforced poly(lactic acid) composites , 2014 .

[29]  A. Pirrotta,et al.  PLA based biocomposites reinforced with Arundo donax fillers , 2014 .

[30]  V. Katiyar,et al.  Thermal degradation kinetics of sucrose palmitate reinforced poly(lactic acid) biocomposites. , 2014, International journal of biological macromolecules.

[31]  Chuanhui Xu,et al.  Physical blend of PLA/NR with co-continuous phase structure: Preparation, rheology property, mechanical properties and morphology , 2014 .

[32]  Meng Qu,et al.  Zinc oxide nanoparticles catalyze rapid hydrolysis of poly(lactic acid) at low temperatures , 2014 .

[33]  W. Zhen,et al.  Properties, Structure and Crystallization of Poly Lactic Acid/Zinc Oxide Pillared Organic Saponite Nanocomposites , 2014 .

[34]  B. Aderibigbe,et al.  Structure and properties of highly toughened biodegradable polylactide/ZnO biocomposite films. , 2014, International journal of biological macromolecules.

[35]  L. Natarajan,et al.  Surface morphology of electrospun PLA fibers: mechanisms of pore formation , 2014 .

[36]  Trudi-Heleen Joubert,et al.  Effect of nanoclay on optical properties of PLA/clay composite films , 2014 .

[37]  P. Dubois,et al.  Current progress in the production of PLA–ZnO nanocomposites: Beneficial effects of chain extender addition on key properties , 2015 .

[38]  Duo Wu,et al.  Recycling PLA to multifunctional oligomeric compatibilizers for PLA/starch composites , 2015 .

[39]  Marinella Levi,et al.  Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling , 2015 .

[40]  D. Paneva,et al.  Photocatalytic self-cleaning poly(L-lactide) materials based on a hybrid between nanosized zinc oxide and expanded graphite or fullerene. , 2016, Materials science & engineering. C, Materials for biological applications.

[41]  Brian J. Rohde,et al.  Synthesis of bottlebrush copolymers based on poly(dimethylsiloxane) for surface active additives , 2016 .

[42]  S. Choi,et al.  Effect of reinforcing particles on hydrolytic degradation behavior of poly (lactic acid) composites , 2016 .

[43]  Lizundia Erlantz,et al.  ポリ(L‐ラクチド)/ZnOナノ複合材の物理的劣化と力学的性能 , 2016 .

[44]  Renato C. Nonato,et al.  Solution parameters in the manufacture of ceramic ZnO nanofibers made by electrospinning , 2016 .

[45]  L. Pérez-Álvarez,et al.  Physical aging and mechanical performance of poly(l‐lactide)/ZnO nanocomposites , 2016 .

[46]  Renato C. Nonato,et al.  Process parameters in the manufacture of ceramic ZnO nanofibers made by electrospinning , 2016 .

[47]  Martine Dubé,et al.  Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications , 2016, Advanced materials.

[48]  Heriberto Rodríguez‐Tobías,et al.  Improvement of mechanical properties and antibacterial activity of electrospun poly(d,l-lactide)-based mats by incorporation of ZnO-graft-poly(d,l-lactide) nanoparticles , 2016 .

[49]  Heriberto Rodríguez‐Tobías,et al.  Photo-degradation of electrospun composite mats based on poly(D,L-lactide) submicron fibers and zinc oxide nanoparticles , 2018, Polymer Degradation and Stability.