Reversible Rail Shear Apparatus Applied to the Study of Woven Laminate Shear Behavior

[1]  Pedro P. Camanho,et al.  Numerical simulation of the non-linear deformation of 5-harness satin weaves , 2012 .

[2]  C. Bouvet,et al.  A bundle-scale model of propagation of a through-the-thickness notch in a woven composite under fatigue loading , 2012 .

[3]  J. Barrau,et al.  Influence of woven ply degradation on fatigue crack growth in thin notched composites under tensile loading , 2010 .

[4]  Shuguang Li,et al.  Modified three rail shear fixture (ASTM D 4255/D 4255M) and an experimental study of nonlinear in-plane shear behaviour of FRC , 2009 .

[5]  Gérard Rio,et al.  Experimental and numerical study of polypropylene behavior using an hyper-visco-hysteresis constitutive law , 2009 .

[6]  W. Paepegem,et al.  Design of a modified three-rail shear test for shear fatigue of composites , 2008 .

[7]  W. Nowacki,et al.  Experimental study of a PA66 solid polymer in the case of cyclic shear loading , 2002 .

[8]  V. Kulakov,et al.  Measurements of shear characteristics of textile composites , 2000 .

[9]  Sun-Pui Ng,et al.  Numerical and experimental determination of in-plane elastic properties of 2/2 twill weave fabric composites , 1998 .

[10]  M. Shokrieh,et al.  Modification of the Three-Rail Shear Test for Composite Materials Under Static and Fatigue Loading , 1997 .

[11]  M. Shokrieh,et al.  Testing of In-Plane Shear Properties under Fatigue Loading , 1995 .

[12]  J. W. Lee,et al.  Method for Monitoring In-Plane Shear Modulus in Fatigue Testing of Composites , 1989 .

[13]  S. C. Tan,et al.  Fracture of composite laminates containing cracks due to shear loading , 1988 .

[14]  S. Lee,et al.  Evaluation of in-plane shear test methods for advanced composite materials by the decision analysis technique , 1986 .

[15]  Carl T. Herakovich,et al.  A Normal Stress Criterion for Crack Extension Direction in Orthotropic Composite Materials , 1985 .

[16]  H. Lakshminarayana.  A Symmetric Rail Shear Test for Mode II Fracture Toughness (GIIC) of Composite Materials—Finite Element Analysis , 1984 .

[17]  R. R. Mcwithey,et al.  An experimental and analytical investigation of the rail shear-test method as applied to composite materials , 1980 .

[18]  J. Mandell.  Fatigue crack propagation rates in woven and nonwoven fiber glass laminates , 1975 .

[19]  D. Sims.  In-Plane Shear Stress-Strain Response of Unidirectional Composite Materials , 1973 .

[20]  J. Whitney,et al.  Analysis of the Rail Shear Test-Applications and Limitations , 1971 .

[21]  Ernest George Coker,et al.  An optical determination of the variation of stress in a thin rectangular plate subjected to shear , 1912 .