Membrane/Electrode Interface Design for Effective Water Management in Alkaline Membrane Fuel Cells.

The recent development of ultra-thin anion-exchange membranes and optimization of their operating conditions have significantly enhanced the performance of alkaline-membrane fuel cells (AMFCs); however, the effects of the membrane/electrode interface structure on the AMFC performance have not been seriously investigated thus far. Herein, we report on a high-performance AMFC system with a membrane/electrode interface of novel design. Commercially available membranes are modified in the form of well-aligned line arrays of both the anode and cathode sides by means of a solvent-assisted molding technique and sandwich-like assembly of the membrane and polydimethylsiloxane molds. Upon incorporating the patterned membranes into a single cell system, we observe a significantly enhanced performance of up to ~35% compared with that of the reference membrane. The enlarged interface area and reduced membrane thickness from the line-patterned membrane/electrode interface result in improved water management, reduced ohmic resistance, and effective utilization of the catalyst. We believe that our findings can significantly contribute further advancements in AMFCs.

[1]  W. Mustain.  Understanding how high-performance anion exchange membrane fuel cells were achieved: Component, interfacial, and cell-level factors , 2018, Current Opinion in Electrochemistry.

[2]  L. Dai,et al.  Efficient Oxygen Reduction Reaction (ORR) Catalysts Based on Single Iron Atoms Dispersed on a Hierarchically Structured Porous Carbon Framework. , 2018, Angewandte Chemie.

[3]  Dario R. Dekel,et al.  Water – A key parameter in the stability of anion exchange membrane fuel cells , 2018, Current Opinion in Electrochemistry.

[4]  Tianshou Zhao,et al.  Advances and challenges in alkaline anion exchange membrane fuel cells , 2018 .

[5]  L. Gubler,et al.  Perspective—Prospects for Durable Hydrocarbon-Based Fuel Cell Membranes , 2018 .

[6]  R. Zengerle,et al.  Tailoring the Membrane‐Electrode Interface in PEM Fuel Cells: A Review and Perspective on Novel Engineering Approaches , 2018 .

[7]  Dario R. Dekel,et al.  Anion exchange membrane fuel cells: Current status and remaining challenges , 2018 .

[8]  Travis J Omasta,et al.  Importance of balancing membrane and electrode water in anion exchange membrane fuel cells , 2018 .

[9]  Dario R. Dekel.  Review of cell performance in anion exchange membrane fuel cells , 2018 .

[10]  Mansoo Choi,et al.  Guided cracking of electrodes by stretching prism-patterned membrane electrode assemblies for high-performance fuel cells , 2018, Scientific Reports.

[11]  X. Sun,et al.  Engineered Graphene Materials: Synthesis and Applications for Polymer Electrolyte Membrane Fuel Cells , 2017, Advanced materials.

[12]  Jin Young Kim,et al.  Effect of the spirobiindane group in sulfonated poly(arylene ether sulfone) copolymer as electrode binder for polymer electrolyte membrane fuel cells , 2017 .

[13]  Chang Won Yoon,et al.  Base tolerant polybenzimidazolium hydroxide membranes for solid alkaline-exchange membrane fuel cells , 2016 .

[14]  D. Yoo,et al.  Moth-Eye TiO2 Layer for Improving Light Harvesting Efficiency in Perovskite Solar Cells. , 2016, Small.

[15]  Y. Choi,et al.  Facile Multiscale Patterning by Creep-Assisted Sequential Imprinting and Fuel Cell Application. , 2016, ACS applied materials & interfaces.

[16]  J. Grate,et al.  Solvent immersion imprint lithography. , 2014, Lab on a chip.

[17]  S. Nam,et al.  Cardo poly(arylene ether sulfone) block copolymers with pendant imidazolium side chains as novel anion exchange membranes for direct methanol alkaline fuel cell , 2013 .

[18]  Yung-Eun Sung,et al.  Ordered macroporous platinum electrode and enhanced mass transfer in fuel cells using inverse opal structure , 2013, Nature Communications.

[19]  J. Varcoe,et al.  Anion-exchange membranes for alkaline polymer electrolyte fuel cells: comparison of pendent benzyltrimethylammonium- and benzylmethylimidazolium-head-groups , 2012 .

[20]  Wei Yuan,et al.  Porous metal materials for polymer electrolyte membrane fuel cells – A review , 2012 .

[21]  N. Kotov,et al.  Incorporation of Indium Tin Oxide Nanoparticles in PEMFC Electrodes , 2012 .

[22]  Pei Kang Shen,et al.  A Highly Order‐Structured Membrane Electrode Assembly with Vertically Aligned Carbon Nanotubes for Ultra‐Low Pt Loading PEM Fuel Cells , 2011 .

[23]  A. Kirubakaran,et al.  A review on fuel cell technologies and power electronic interface , 2009 .

[24]  B. Popov,et al.  Effect of hydrophobicity and pore geometry in cathode GDL on PEM fuel cell performance , 2009 .

[25]  Mark Pritzker,et al.  On the role of the microporous layer in PEMFC operation , 2009 .

[26]  K. Karan,et al.  Investigation of Charge-Transfer and Mass-Transport Resistances in PEMFCs with Microporous Layer Using Electrochemical Impedance Spectroscopy , 2009 .

[27]  Rae Duk Lee,et al.  Importance of Proton Conductivity Measurement in Polymer Electrolyte Membrane for Fuel Cell Application , 2005 .

[28]  G. Whitesides,et al.  Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices. , 2003, Analytical chemistry.

[29]  George M. Whitesides,et al.  Solvent‐assisted microcontact molding: A convenient method for fabricating three‐dimensional structures on surfaces of polymers , 1997 .

[30]  I. Zenyuk,et al.  Hot topics in alkaline exchange membrane fuel cells , 2018 .

[31]  Hee‐Tak Kim,et al.  Three‐Dimensional Interlocking Interface: Mechanical Nanofastener for High Interfacial Robustness of Polymer Electrolyte Membrane Fuel Cells , 2017, Advanced materials.

[32]  Matthew M. Mench,et al.  Water Management in Polymer Electrolyte Fuel Cells through Asymmetric Thermal and Mass Transport Engineering of the Micro-Porous Layers , 2016 .

[33]  M. Perry,et al.  Oxygen gain analysis for proton exchange membrane fuel cells , 2012 .

[34]  D. Mahajan,et al.  Metal bipolar plates for PEM fuel cell—A review , 2007 .