Life Cycle Assessment of Lighting Systems and Light Loss Factor: A Case Study for Indoor Workplaces in France

Life cycle assessment (LCA) methodology has been used to evaluate the performance of the following lighting systems: compact fluorescent lamps (CFL), light-emitting diode (LED) lamps, and fluorescent tubes (T5 type). This work covers the singularity of the French electricity mix for indoor workplaces lighting and describes the best strategy for lamp replacement. We have defined the light loss factor to integrate the following additional parameters: lumen depreciation, dirt accumulation, and risks of failure. Therefore, we propose a new definition of the functional unit (maintained megalumen hour), and we conduct this assessment to be compliant with the standards of lighting system equipment (NF EN 12464-1). Unlike previous studies, we observed that the manufacturing phase is the most impacting over the whole life cycle, thus making the extension of LED lamps’ lifetime a more effective strategy to reduce the potential environmental impacts than increasing their efficacy. This paper highlights how the light loss factor affects the LCA results and proves that it should be taken into account for subsequent assessments. Finally, this new approach includes the real usage of the lamps in the study and contributes to lay the foundation for life cycle sustainability assessment to also evaluate the economic, social, and human impacts of lighting.

[1]  Lorenz M. Hilty,et al.  Environmental impacts of lighting technologies — Life cycle assessment and sensitivity analysis , 2011 .

[2]  Leena Tähkämö,et al.  Life cycle assessment of road lighting luminaires Comparison of light-emitting diode and high-pressure sodium technologies , 2015 .

[3]  Ben Amor,et al.  Exploring the Current Challenges and Opportunities of Life Cycle Sustainability Assessment , 2019, Sustainability.

[4]  Zhihua Zhou,et al.  A comparative life-cycle assessment of hydro-, nuclear and wind power: A China study , 2019, Applied Energy.

[5]  Paolo Principi,et al.  A comparative life cycle assessment of luminaires for general lighting for the office – compact fluorescent (CFL) vs Light Emitting Diode (LED) – a case study , 2014 .

[6]  Kuldip Singh Sangwan,et al.  Life Cycle Assessment of Incandescent, Fluorescent, Compact Fluorescent and Light Emitting Diode Lamps in an Indian Scenario☆ , 2014 .

[7]  Rachel Dzombak,et al.  Assessment of end-of-life design in solid-state lighting , 2017 .

[8]  Manuela Franz,et al.  Critical review on life cycle inventories and environmental assessments of LED-lamps , 2017 .

[9]  R. Baumgartner,et al.  The Third Wave of LCA as the “Decade of Consolidation” , 2019, Sustainability.

[10]  G. Zissis,et al.  Life cycle assessment of light-emitting diode downlight luminaire—a case study , 2013, The International Journal of Life Cycle Assessment.

[11]  Michael P. Royer Lumen Maintenance and Light Loss Factors: Consequences of Current Design Practices for LEDs , 2014 .