Hardware-software Reconfigurable Techniques for Wireless Sensor Network

Now-a-days, the industrial based real time embedded applications are highly developed and they act as a major role in the production cost and real world safety environment. In that, one of the advanced technique is that reconfigurable techniques. This technique plays a major role with wireless sensor networks for the efficient data transmissions. In recent days, most of the industrial applications are works to minimize the size and cost of device. The foremost improvement of the reconfigurable technique is that it circumvents the unnecessary hang and deferral in the device performance. In modern biosphere, Field Programmable Gate Array (FPGA) is one of the supreme operative reconfigurable devices and generally used for most of the hardware and software reconfiguration applications. In this study, the exertion pacts with whatever going to make changes in the hardware and software during runtime, it should not disturb the present successively process. This is the main impartial of the study that the changes to be done in an analogous manner at the same time concentrating the cost and power transmission problems during data trans-receiving and also the results to be seen with the help of online manner via the Ethernet cable.

[1]  Eric Monmasson,et al.  FPGA Design Methodology for Industrial Control Systems—A Review , 2007, IEEE Transactions on Industrial Electronics.

[2]  Feng Zhao,et al.  mPlatform: a reconfigurable architecture and efficient data sharing mechanism for modular sensor nodes , 2007, IPSN.

[3]  Teresa Riesgo Alcaide,et al.  Wireless Sensor Networks Node with Remote HW/SW Reconfiguration Capabilities , 2009 .

[4]  Diederik Verkest,et al.  Run-Time Management of a MPSoC Containing FPGA Fabric Tiles , 2008, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[5]  Teresa Riesgo,et al.  A Hardware Library for Sensors/Actuators Interfaces in Sensor Networks , 2006, 2006 13th IEEE International Conference on Electronics, Circuits and Systems.

[6]  David E. Culler,et al.  Telos: enabling ultra-low power wireless research , 2005, IPSN 2005. Fourth International Symposium on Information Processing in Sensor Networks, 2005..

[7]  Gutierrez Abascal Embedded Runtime Reconfigurable Nodes for Wireless Sensor Networks Applications , 2011 .

[8]  Marco Platzner,et al.  Operating systems for reconfigurable embedded platforms: online scheduling of real-time tasks , 2004, IEEE Transactions on Computers.

[9]  Andreas Willig,et al.  Recent and Emerging Topics in Wireless Industrial Communications: A Selection , 2008, IEEE Transactions on Industrial Informatics.

[10]  M.C.E. Yagoub,et al.  FPGA Implementation of a Fuzzy Controller for Neural Network Based Adaptive Control of a Flexible Joint with Hard Nonlinearities , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[11]  John W. Lockwood,et al.  Automated Method to Generate Bitstream Intellectual Property Cores for Virtex FPGAs , 2004, FPL.

[12]  Jing-Bing Zhang,et al.  The wireless sensor networks for factory automation: Issues and challenges , 2007, 2007 IEEE Conference on Emerging Technologies and Factory Automation (EFTA 2007).

[13]  Manfred Glesner,et al.  Design Concepts for a Dynamically ReconfigurableWireless Sensor Node , 2006, First NASA/ESA Conference on Adaptive Hardware and Systems (AHS'06).