Hot tensile properties, microstructure evolution and fracture mechanisms of Ti-6Al-4V alloy with initial coarse equiaxed phases

[1]  Y. Lin,et al.  Precipitation of Secondary Phase and Phase Transformation Behavior of a Solution‐Treated Ti–6Al–4V Alloy during High‐Temperature Aging , 2020, Advanced Engineering Materials.

[2]  Y. Lin,et al.  Constitutive Model and Processing Maps for a Ti‐55511 Alloy in β Region , 2019, Advanced Engineering Materials.

[3]  Y. Lin,et al.  Effects of solution temperature and cooling rate on α phases and mechanical properties of a forged Ti-55511 alloy , 2019, Materials Research Express.

[4]  Y. Lin,et al.  Hot compressive deformation behavior and microstructure evolution of a Ti-55511 alloy with basket-weave microstructures , 2019, Vacuum.

[5]  Y. Lin,et al.  Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression , 2019, Journal of Alloys and Compounds.

[6]  Y. Lin,et al.  Precipitation behavior of a β-quenched Ti-5Al-5Mo-5V-1Cr-1Fe alloy during high-temperature compression , 2019, Materials Characterization.

[7]  Qinyang Zhao,et al.  Evaluation of the hot workability and deformation mechanisms for a metastable beta titanium alloy prepared from powder , 2019, Materials Characterization.

[8]  S. Abbasi,et al.  A comparative study on the hot deformation behavior of Ti 5Al 5Mo 5V 3Cr and newly developed Ti 4Al 7Mo 3V 3Cr alloys , 2019, Vacuum.

[9]  Y. Lin,et al.  Effects of solution temperature and cooling rate on microstructure and micro-hardness of a hot compressed Ti-6Al-4V alloy , 2019, Vacuum.

[10]  J. Merwe,et al.  Hot working of Ti-6Al-4V with a complex initial microstructure , 2018, International Journal of Material Forming.

[11]  Y. Lin,et al.  Phase transformation and constitutive models of a hot compressed TC18 titanium alloy in the α+β regime , 2018, Vacuum.

[12]  Y. C. Lin,et al.  Isothermal tensile deformation behaviors and fracture mechanism of Ti-5Al-5Mo-5V-1Cr-1Fe alloy in β phase field , 2018, Vacuum.

[13]  Huang Liang,et al.  Hot deformation and dynamic recrystallization of a near-beta titanium alloy in the β single phase region , 2018, Vacuum.

[14]  Qing Liu,et al.  Microstructure evolution and static recrystallization during hot rolling and annealing of an equiaxed-structure TC21 titanium alloy , 2018, Journal of Alloys and Compounds.

[15]  B. Tang,et al.  Dynamic recrystallization and texture evolution of Ti-22Al-25Nb alloy during plane-strain compression , 2018 .

[16]  Youtang Li,et al.  High-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy , 2018 .

[17]  Y. C. Lin,et al.  Effects of initial microstructures on hot tensile deformation behaviors and fracture characteristics of Ti-6Al-4V alloy , 2018 .

[18]  A. Sarkar,et al.  Influence of annealing parameters on phase evolution and recrystallization kinetics of a Mn-Al-Si alloyed duplex steel , 2017 .

[19]  S. Suwas,et al.  Orientation dependent spheroidization response and macro-zone formation during sub β-transus processing of Ti-6Al-4V alloy , 2017 .

[20]  Lianxi Hu,et al.  Dynamic softening behavior and microstructural characterization of TiAl-based alloy during hot deformation , 2017 .

[21]  V. Madhu,et al.  Constitutive modeling and fracture behavior of a biomedical Ti–13Nb-13Zr alloy , 2017 .

[22]  Swadesh Kumar Singh,et al.  Experimental and theoretical investigation of forming limit diagram for Ti-6Al-4 V alloy at warm condition , 2017 .

[23]  A. Jäger,et al.  Flow softening and dynamic recrystallization behavior of BT9 titanium alloy: A study using process map development , 2017 .

[24]  K. R. Ravi,et al.  On the high temperature deformation behaviour of titanium alloy BT3-1 , 2017 .

[25]  S. M. Abbasi,et al.  Constitutive modeling for high-temperature flow behavior of Ti-6242S alloy , 2017 .

[26]  S. Abbasi,et al.  Flow softening behavior of Ti–13V–11Cr–3Al beta Ti alloy in double-hit hot compression tests , 2016 .

[27]  Jie Zhou,et al.  Identification for the Optimal Working Parameters of Ti-6Al-4V-0.1Ru Alloy in a Wide Deformation Condition Range by Processing Maps Based on DMM , 2016 .

[28]  Miaoquan Li,et al.  Evolution mechanisms of the primary α and β phases during α/β deformation of an α/β titanium alloy TC8 , 2016 .

[29]  Guo-zheng Quan,et al.  Numerical Descriptions of Hot Flow Behaviors across β Transus for as-Forged Ti–10V–2Fe–3Al Alloy by LHS-SVR and GA-SVR and Improvement in Forming Simulation Accuracy , 2016 .

[30]  Dong-Dong Chen,et al.  A novel constitutive model for hot deformation behaviors of Ti–6Al–4V alloy based on probabilistic method , 2016 .

[31]  H. Jafarian,et al.  Dynamic softening mechanism in Ti-13V-11Cr-3Al beta Ti alloy during hot compressive deformation , 2016 .

[32]  J. Shu,et al.  The identification of dynamic recrystallization and constitutive modeling during hot deformation of Ti55511 titanium alloy , 2015 .

[33]  Y. Ning,et al.  Dynamic softening behavior of TC18 titanium alloy during hot deformation , 2015 .

[34]  W. Zeng,et al.  Development of the Dynamic Globularization Prediction Model for Ti-17 Titanium Alloy Using Finite Element Method , 2015, Journal of Materials Engineering and Performance.

[35]  S. Suwas,et al.  Enhanced superplasticity for (α + β)-hot rolled Ti–6Al–4V–0.1B alloy by means of dynamic globularization , 2014 .

[36]  J. Sieniawski,et al.  Microstructural aspects of superplasticity in Ti–6Al–4V alloy , 2014 .

[37]  H. Yang,et al.  Deformation behavior and microstructure evolution in multistage hot working of TA15 titanium alloy: on the role of recrystallization , 2011 .

[38]  W. Zeng,et al.  Dynamic globularization kinetics during hot working of Ti-17 alloy with initial lamellar microstructure , 2010 .

[39]  C. Park,et al.  Enhanced superplasticity utilizing dynamic globularization of Ti–6Al–4V alloy , 2008 .

[40]  S. Semiatin,et al.  Flow behavior and globularization kinetics during hot working of Ti–6Al–4V with a colony alpha microstructure , 1999 .

[41]  F. Froes,et al.  Modification of alpha morphology in Ti-6Al-4V by thermomechanical processing , 1986 .

[42]  S. Dey,et al.  Peak stress studies of hot compressed TiHy 600 alloy , 2017 .

[43]  Changhee Lee,et al.  Hot deformation behavior and microstructural evolution of alumina-forming austenitic heat-resistant steels during hot compression , 2017 .

[44]  J. Krawczyk,et al.  The analysis of the hot deformation behaviour of the Ti–3Al–8V–6Cr–4Zr–4Mo alloy, using processing maps, a map of microstructure and of hardness , 2015 .