Mechanical Drilling Force Model for Longitudinal Ultrasonic Vibration-assisted Drilling of Unidirectional CFRP

[1]  T. Ko,et al.  Comprehensive prediction model of drilling temperature of UD-CFRP laminates considering the combined action of main cutting edge and chisel edge , 2023, Composite Structures.

[2]  Bo Fu,et al.  A novel model of vibration plowing effect for longitudinal ultrasonic vibration-assisted drilling , 2023, Journal of Manufacturing Processes.

[3]  J. Sinke,et al.  Machining GLARE fibre metal laminates: a comparative study on drilling effect between conventional and ultrasonic-assisted drilling , 2022, The International Journal of Advanced Manufacturing Technology.

[4]  F. Jiao,et al.  A review on the drilling of CFRP/Ti stacks: Machining characteristics, damage mechanisms and suppression strategy at stack interface , 2022, Composite Structures.

[5]  K. Aslantaş,et al.  An Experimental Comprehensive Analysis of Drilling Carbon Fiber Reinforced Plastic Tubes and Comparison With Carbon Fiber Reinforced Plastic Plate , 2022, Journal of Reinforced Plastics and Composites.

[6]  Wei Zheng,et al.  Cutting Force Modeling of Machining Carbon Fiber Reinforced Polymer (CFRP) Composites: A Review , 2022, Composite Structures.

[7]  F. Jiao,et al.  Research on entrance delamination characteristics and damage suppression strategy in drilling CFRP/Ti6Al4V stacks , 2022, Journal of Manufacturing Processes.

[8]  Zhenyuan Jia,et al.  Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP , 2021 .

[9]  Ming Chen,et al.  Investigation on the cutting responses of CFRP/Ti stacks: With special emphasis on the effects of drilling sequences , 2020 .

[10]  Chenbing Ni,et al.  Review of ultrasonic vibration-assisted machining in advanced materials , 2020 .

[11]  Zhenyuan Jia,et al.  Analytical study of delamination damage and delamination-free drilling method of CFRP composite , 2020 .

[12]  K. Wegener,et al.  Analytical force model for drilling out unidirectional carbon fibre reinforced polymers (CFRP) , 2020 .

[13]  F. Jiao,et al.  Mechanics of thrust force on chisel edge in carbon fiber reinforced polymer (CFRP) drilling based on bending failure theory , 2020 .

[14]  Baoqi Chang,et al.  The effects of thermo-mechanical load on the vibrational characteristics of ultrasonic vibration system. , 2019, Ultrasonics.

[15]  J. Paulo Davim,et al.  Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review , 2019, Composites Part A: Applied Science and Manufacturing.

[16]  Sezer Morkavuk,et al.  Optimization and prediction of thrust force, vibration and delamination in drilling of functionally graded composite using Taguchi, ANOVA and ANN analysis , 2019, Materials Research Express.

[17]  A. Azmi,et al.  Critical thrust force and critical feed rate in drilling flax fibre composites: A comparative study of various thrust force models , 2019, Composites Part B: Engineering.

[18]  K. Wegener,et al.  Analytical force model for orthogonal machining of unidirectional carbon fibre reinforced polymers (CFRP) as a function of the fibre orientation , 2019, Journal of Materials Processing Technology.

[19]  Hasan Gökkaya,et al.  A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials , 2018, Defence Technology.

[20]  Gandjar Kiswanto,et al.  Experimental and analytical study of ultrasonic elliptical vibration cutting on AISI 1045 for sustainable machining of round-shaped microgroove pattern , 2018, The International Journal of Advanced Manufacturing Technology.

[21]  Gandjar Kiswanto,et al.  Development of a two-frequency, elliptical-vibration texturing device for surface texturing , 2017 .

[22]  Hui Cheng,et al.  A cutting force predicting model in orthogonal machining of unidirectional CFRP for entire range of fiber orientation , 2017 .

[23]  Deyuan Zhang,et al.  Feasibility study of ultrasonic elliptical vibration‐assisted reaming of carbon fiber reinforced plastics/titanium alloy stacks , 2017, Ultrasonics.

[24]  Pingfa Feng,et al.  Investigations on the critical feed rate guaranteeing the effectiveness of rotary ultrasonic machining , 2017, Ultrasonics.

[25]  Liangchi Zhang,et al.  Mechanics of fibre deformation and fracture in vibration-assisted cutting of unidirectional fibre-reinforced polymer composites , 2016 .

[26]  Gérard Poulachon,et al.  CFRP drilling: Fundamental study of local feed force and consequences on hole exit damage , 2015 .

[27]  Hui Cheng,et al.  An analytical method for predicting the fluctuation of thrust force during drilling of unidirectional carbon fiber reinforced plastics , 2015 .

[28]  Xin Wang,et al.  Comparative tool wear study based on drilling experiments on CFRp/Ti stack and its individual layers , 2014 .

[29]  Weixing Xu,et al.  On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibre-reinforced polymer composites , 2014 .

[30]  Liangchi Zhang,et al.  Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: Understanding the material removal mechanisms , 2014 .

[31]  Paul Xirouchakis,et al.  Mechanical load distribution along the main cutting edges in drilling , 2013 .

[32]  D. Guo,et al.  Prediction of the cutting forces generated in the drilling of carbon-fibre-reinforced plastic composites using a twist drill , 2012 .

[33]  Behnam Bahr,et al.  An analytical method for predicting cutting forces in orthogonal machining of unidirectional composites , 2010 .

[34]  Wei Zhang,et al.  A practical method to determine rake angles of twist drill by measuring the cutting edge , 2010 .

[35]  Gary M. Bone,et al.  Thrust force model for vibration-assisted drilling of aluminum 6061-T6 , 2009 .

[36]  Henri Paris,et al.  A numerical simulator to predict the dynamical behavior of the Self Vibratory Drilling Head , 2008 .

[37]  J. Wallaschek,et al.  The effect of friction reduction in presence of ultrasonic vibrations and its relevance to travelling wave ultrasonic motors. , 2002, Ultrasonics.

[38]  H. J. Zhang,et al.  A FORCE PREDICTION MODEL FOR CUTTING UNIDIRECTIONAL FIBRE-REINFORCED PLASTICS , 2001 .

[39]  Jörg Wallaschek,et al.  Sliding friction in the presence of ultrasonic oscillations: superposition of longitudinal oscillations , 2001 .

[40]  Hongwei Zhao,et al.  Mechanical model for predicting thrust and torque in vibration drilling fibre-reinforced composite materials , 2001 .

[41]  Pierre Joyot,et al.  Mechanical modelling of high speed drilling. 2: predicted and experimental results , 1999 .

[42]  Pierre Joyot,et al.  Mechanical modelling of high speed drilling. 1: predicting torque and thrust , 1999 .

[43]  R. DeVor,et al.  A Mechanistic Approach to Predicting the Cutting Forces in Drilling: With Application to Fiber-Reinforced Composite Materials , 1993 .

[44]  D. W. Wu,et al.  A New Approach of Formulating the Transfer Function for Dynamic Cutting Processes , 1989 .

[45]  T. Ko,et al.  3-DOF ultrasonic elliptical vibration tool holder based on coupled resonance modes for manufacturing micro-groove , 2021 .

[46]  F. Jiao,et al.  Development of a longitudinal–torsional ultrasonic vibration-aided drilling system for drilling carbon fiber-reinforced polymer materials , 2019, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[47]  K. Wegener,et al.  Fundamental analysis of the cutting edge micro-geometry in orthogonal machining of unidirectional Carbon Fibre Reinforced Plastics (CFRP) , 2018 .

[48]  A. Langella,et al.  A torque and thrust prediction model for drilling of composite materials , 2005 .

[49]  A. C. Fischer-Cripps,et al.  The Hertzian contact surface , 1999 .

[50]  D. William Wu,et al.  Application of a comprehensive dynamic cutting force model to orthogonal wave-generating processes , 1988 .

[51]  A. R. Watson,et al.  Geometry of drill elements , 1985 .