Experimental study on pullout behaviour of basalt fiber-reinforced polymers minibar embedded in ultra-high performance seawater sea-sand concrete

[1]  Chuncheng Yang,et al.  Effects of Tio2 Doped to Basalt on Producing Continuous Fiber and Their Electrical Properties , 2023, SSRN Electronic Journal.

[2]  Zhishen Wu,et al.  Effect of constituent content on mechanical behaviors of ultra-high performance seawater sea-sand concrete , 2022, Construction and Building Materials.

[3]  Hammad A. Khan,et al.  Bond performance of basalt FRP bar against aggressive environment in high-strength concrete with varying bar diameter and bond length , 2022, Construction and Building Materials.

[4]  Zhishen Wu,et al.  Composite-Wedge Anchorage for Fiber-Reinforced Polymer Tendons , 2022, Journal of Composites for Construction.

[5]  Q. Yu,et al.  Influence of steel fiber content on the rate-dependent flexural performance of ultra-high performance concrete with coarse aggregates , 2022, Construction and Building Materials.

[6]  D. Yan,et al.  Experimental investigation on sing fiber pullout behaviour on steel fiber-matrix of reactive powder concrete (RPC) , 2022, Construction and Building Materials.

[7]  Zhishen Wu,et al.  Experimental study on the seismic behavior of seawater sea sand concrete beams reinforced with steel-FRP composite bars , 2021, Engineering Structures.

[8]  O. Jensen,et al.  Influence of micromechanical property on the rate-dependent flexural strength of ultra-high performance concrete containing coarse aggregates (UHPC-CA) , 2021, Composites Part B: Engineering.

[9]  Xiaodong Chen,et al.  Microstructure evolution of cement mortar containing MgO-CaO blended expansive agent and temperature rising inhibitor under multiple curing temperatures , 2021 .

[10]  R. Jose,et al.  Oyster shell waste as a concrete ingredient: A review , 2021 .

[11]  Wasim S. Barham,et al.  Influence of magnetic field treated water on the compressive strength and bond strength of concrete containing silica fume , 2021 .

[12]  Jiaping Liu,et al.  Effects of CaO-based and MgO-based expansion agent, curing temperature and restraint degree on pore structure of early-age mortar , 2020 .

[13]  Q. Yuan,et al.  Durability of ultra-high performance concrete – A review , 2020, Construction and Building Materials.

[14]  Gang Wu,et al.  Behaviors of hybrid beams composed of seawater sea-sand concrete (SWSSC) and a prefabricated UHPC shell reinforced with FRP bars , 2019, Construction and Building Materials.

[15]  J. Teng,et al.  Development and mechanical behaviour of ultra-high-performance seawater sea-sand concrete , 2019, Advances in Structural Engineering.

[16]  Antonio Nanni,et al.  Fresh and hardened properties of seawater-mixed concrete , 2018, Construction and Building Materials.

[17]  Jiaping Liu,et al.  Pore structure characterization of early-age cement pastes blended with high-volume fly ash , 2018, Construction and Building Materials.

[18]  A. Sadrmomtazi,et al.  Effect of materials proportion on rheology and mechanical strength and microstructure of ultra-high performance concrete (UHPC) , 2018, Construction and Building Materials.

[19]  K. Khayat,et al.  How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC? , 2018, Cement and Concrete Composites.

[20]  Antonio Nanni,et al.  Use of sea-sand and seawater in concrete construction: Current status and future opportunities , 2017 .

[21]  S. Pyo,et al.  Effects of coarser fine aggregate on tensile properties of ultra high performance concrete , 2017 .

[22]  Masoud Latifi,et al.  Hybrid short fiber reinforcement system in concrete: A review , 2017 .

[23]  M. Fan,et al.  Pull-Out Behaviour of Hooked End Steel Fibres Embedded in Ultra-high Performance Mortar with Various W/B Ratios , 2017 .

[24]  K. Khayat,et al.  Effect of nano-SiO2 particles and curing time on development of fiber-matrix bond properties and microstructure of ultra-high strength concrete , 2017 .

[25]  Sreekanta Das,et al.  Mechanical behaviour of basalt fibre reinforced concrete , 2016 .

[26]  Nemkumar Banthia,et al.  Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review , 2016 .

[27]  Kazuhiko Kawashima,et al.  Seismic-Resistant Bridge Columns with Ultrahigh-Performance Concrete Segments , 2016 .

[28]  L. Torres,et al.  Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars , 2016 .

[29]  Caijun Shi,et al.  Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete , 2016 .

[30]  C. Shi,et al.  A review on ultra high performance concrete: Part II. Hydration, microstructure and properties , 2015 .

[31]  Seong-Tae Yi,et al.  Effect of oyster shell as an aggregate replacement on the characteristics of concrete , 2015 .

[32]  Halit Yazici,et al.  Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar , 2015 .

[33]  Zhishen Wu,et al.  Evaluation of prestressed basalt fiber and hybrid fiber reinforced polymer tendons under marine environment , 2014 .

[34]  Xinyu Fan,et al.  A high efficient method for introducing reactive amines onto carbon fiber surfaces using hexachlorocyclophosphazene as a new coupling agent , 2014 .

[35]  Nagesh R. Iyer,et al.  Mechanical Properties of Ultra High Performance Concrete , 2012 .

[36]  S. Jacobsen,et al.  Study of interfacial microstructure, fracture energy, compressive energy and debonding load of steel fiber-reinforced mortar , 2011 .

[37]  Seong-Tae Yi,et al.  Effect of partial replacement of sand with dry oyster shell on the long-term performance of concrete , 2010 .

[38]  ChongKu Yi,et al.  Interfacial bond strength of glass fiber reinforced polymer bars in high-strength concrete , 2008 .

[39]  Young-Moon Leem,et al.  Effect of oyster shell substituted for fine aggregate on concrete characteristics: Part I. Fundamental properties , 2005 .

[40]  Hwai Chung Wu,et al.  Effect of Plasma Treatment of Polyethylene Fibers on Interface and ementitious Composite Properties , 2005 .

[41]  Mitsunori Kawamura,et al.  Evaluation of capillary pore size characteristics in high-strength concrete at early ages , 2005 .

[42]  Y. Chan,et al.  Effect of silica fume on steel fiber bond characteristics in reactive powder concrete , 2004 .

[43]  R. F. Zollo.  Fiber-reinforced concrete: An overview after 30 years of development , 1997 .

[44]  Luigi Nicolais,et al.  Analysis of steel fibre pull-out from a cement matrix using video photography , 1996 .

[45]  Antoine E. Naaman,et al.  Fiber Pullout and Bond Slip. I: Analytical Study , 1991 .

[46]  Antoine E. Naaman,et al.  Fiber Pullout and Bond Slip. II: Experimental Validation , 1991 .