Novel membranes based on poly(5-(methacrylamido)tetrazole) and sulfonated polysulfone for proton exchange membrane fuel cells

Proton-exchange membrane fuel cells (PEMFC)s are increasingly regarded as promising environmentally benign power sources. Heterocyclic molecules are commonly used in the proton conducting membranes as dopant or polymer side group due to their high proton transfer ability. In this study, 5-(methacrylamido)tetrazole monomer, prepared by the reaction of methacryloyl chlo- ride with 5-aminotetrazole, was polymerized via conventional free radical mechanism to achieve poly(5-(methacrylamido)tetrazole) homopolymer. Novel composite membranes, SPSU-PMTetX, were successfully produced by incorporating sulfonated polysulfone (SPSU) into poly(5-(methacrylamido)tetrazole) (PMTet). The sulfonation of polysulfone was performed with trimethylsilyl chlorosul- fonate and high degree of sulfonation (140%) was obtained. The homopolymers and composite membranes have been characterized by NMR, FTIR, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). 1 H-NMR and FTIR confirmed the sulfonation of PSU and the ionic interaction between sulfonic acid and poly(5-(methacrylamido)tetrazole) units. TGA showed that the polymer electrolyte membranes are thermally stable up to � 190 � C. Scanning electron microscopy analysis indicated the homoge- neity of the membranes. This result was also supported by the appearance of a single Tg in the DSC curves of the blends. Water uptake and proton conductivity measurements were, as well, carried out. Methanol permeability measurements showed that the com- posite membranes have similar methanol permeability values with Nafion 112. The maximum proton conductivity of anhydrous SPSU-PMTet0.5 at 150 � C was determined as 2.2 3 10 26 Sc m 21 while in humidified conditions at 20 � C a value of 6 3 10 23 Sc m 21 was found for SPSU-PMTet2. V C 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40107.

[1]  A. Manthiram,et al.  Novel Blend Membranes Based on Acid-Base Interactions for Fuel Cells , 2012 .

[2]  S. Çelik,et al.  Novel proton conductive hybrid membranes based on sulfonated polysulfone and benzotriazole , 2012 .

[3]  Autchara Pangon,et al.  From A Fundamental Study on Hydrogen Bond Network and Chain Mobility in Benzimidazole Model Compounds to Various Designs and Development of Benzimidazole-based Anhydrous Membranes for Proton Exchange Membrane Fuel Cell , 2011 .

[4]  S. Çelik,et al.  Synthesis and proton conductivity studies of 5‐aminotetrazole‐doped sulfonated polymer electrolyte membranes , 2011 .

[5]  S. Chirachanchai,et al.  Poly(acrylic acid-co-4-vinylimidazole)/Sulfonated poly(ether ether ketone) blend membranes: A role of polymer chain with proton acceptor and donor for enhancing proton transfer in anhydrous system , 2011 .

[6]  S. Çelik,et al.  The synthesis and characterization of anhydrous proton conducting membranes based on sulfonated poly(vinyl alcohol) and imidazole , 2011 .

[7]  Unal Sen,et al.  Nafion/poly(1-vinyl-1,2,4-triazole) blends as proton conducting membranes for polymer electrolyte membrane fuel cells , 2010 .

[8]  S. Çelik,et al.  Synthesis and proton conductivity studies of doped azole functional polymer electrolyte membranes , 2010 .

[9]  A. Manthiram,et al.  High performance direct methanol fuel cells based on acid–base blend membranes containing benzotriazole , 2010 .

[10]  A. Bozkurt,et al.  Preparation, Properties, and Characterization of Polymer Electrolyte Membranes Based on Poly(1-vinyl-1,2,4 triazole) and Poly(styrene sulfonic acid) , 2009 .

[11]  A. Bozkurt,et al.  Development and characterization of polymer electrolyte membranes based on ionical cross-linked poly(1-vinyl-1,2,4 triazole) and poly(vinylphosphonic acid) , 2009 .

[12]  Serdar Erkan,et al.  Preparation and characterization of sulfonated polysulfone/titanium dioxide composite membranes for proton exchange membrane fuel cells , 2009 .

[13]  Unal Sen,et al.  Proton conducting membranes based on Poly(2,5-benzimidazole) (ABPBI)–Poly(vinylphosphonic acid) blends for fuel cells , 2009 .

[14]  B. Smitha,et al.  Proton-conducting composite membranes of chitosan and sulfonated polysulfone for fuel cell application , 2008 .

[15]  Unal Sen,et al.  Anhydrous proton conducting membranes for PEM fuel cells based on Nafion/Azole composites , 2008 .

[16]  V. Antonucci,et al.  Polymer electrolytes based on sulfonated polysulfone for direct methanol fuel cells , 2008 .

[17]  A. Manthiram,et al.  Sulfonated polysulfone with 1,3-1H-dibenzimidazole-benzene additive as a membrane for direct methanol fuel cells , 2008 .

[18]  Chuh‐Yung Chen,et al.  Synthesis and properties of novel HMS-based sulfonated poly(arylene ether sulfone)/silica nano-composite membranes for DMFC applications , 2007 .

[19]  M. Shaw,et al.  Ionic crosslinking of ionomer polymer electrolyte membranes using barium cations , 2007 .

[20]  V. Antonucci,et al.  Development and characterization of sulfonated polysulfone membranes for direct methanol fuel cells , 2006 .

[21]  Michael D. Guiver,et al.  Blend membranes based on sulfonated poly(ether ether ketone) and polysulfone bearing benzimidazole side groups for proton exchange membrane fuel cells , 2006 .

[22]  S. Licoccia,et al.  SPEEK/PPSU-based organic–inorganic membranes: proton conducting electrolytes in anhydrous and wet environments , 2006 .

[23]  C. Ma,et al.  Preparation and characterization of poly(ether sulfone)/sulfonated poly(ether ether ketone) blend membranes , 2006 .

[24]  M. Shaw,et al.  Proton-exchange membranes composed of slightly sulfonated poly(ether ketone ketone) and highly sulfonated crosslinked polystyrene particles , 2006 .

[25]  J. Benziger,et al.  Nafion-layered sulfonated polysulfone fuel cell membranes , 2005 .

[26]  Meilin Liu,et al.  1H-1,2,4-Triazole: An Effective Solvent for Proton-Conducting Electrolytes , 2005 .

[27]  J. Kallitsis,et al.  Proton conducting membranes based on blends of PBI with aromatic polyethers containing pyridine units , 2005 .

[28]  J. Kerres,et al.  Blended and Cross‐Linked Ionomer Membranes for Application in Membrane Fuel Cells , 2005 .

[29]  M. Hickner,et al.  Poly(Arylene Ether Sulfone) Copolymers and Related Systems from Disulfonated Monomer Building Blocks: Synthesis, Characterization, and Performance – A Topical Review , 2005 .

[30]  Y. Lee,et al.  Annealing effect of sulfonated polysulfone ionomer membranes on proton conductivity and methanol transport , 2005 .

[31]  Yuxin Wang,et al.  Sulfonated poly(ether ether ketone) membranes for direct methanol fuel cell , 2003 .

[32]  Ronghuan He,et al.  Proton conductivity of phosphoric acid doped polybenzimidazole and its composites with inorganic proton conductors , 2003 .

[33]  A. Kraft,et al.  Synthesis and polymerization of 5‐(methacrylamido)tetrazole, a water‐soluble acidic monomer , 2002 .

[34]  H. Kita,et al.  Novel Sulfonated Polyimides as Polyelectrolytes for Fuel Cell Application. 1. Synthesis, Proton Conductivity, and Water Stability of Polyimides from 4,4‘-Diaminodiphenyl Ether-2,2‘-disulfonic Acid , 2002 .

[35]  P. Jannasch,et al.  Sulfophenylation of polysulfones for proton-conducting fuel cell membranes , 2002 .

[36]  V. Antonucci,et al.  Sulfonated polysulfone ionomer membranes for fuel cells , 2001 .

[37]  M. Uspenskaya,et al.  Synthesis and Absorption Power of New Polyelectrolyte Tetrazole-Containing Acrylic Hydrogels , 2001 .

[38]  C. Kontoyannis,et al.  New polymer electrolytes based on blends of sulfonated polysulfones with polybenzimidazole , 2001 .

[39]  Jean-Yves Sanchez,et al.  Ionomeric membranes for proton exchange membrane fuel cell (PEMFC): sulfonated polysulfone associated with phosphatoantimonic acid , 2001 .

[40]  E. Passalacqua,et al.  Sulfonated polysulfone as promising membranes for polymer electrolyte fuel cells , 2000 .

[41]  Qunhui Guo,et al.  Sulfonated and crosslinked polyphosphazene-based proton-exchange membranes , 1999 .

[42]  S. Çelik,et al.  Preparation and proton conductivity of acid-doped 5-aminotetrazole functional poly(glycidyl methacrylate) , 2008 .

[43]  S. Neophytides,et al.  New polymer electrolyte membrane based on sulfonated polysulfone blends , 2005 .