3D printing: It’s microfluidic functions and environmental impacts

[1]  B. Wałpuski,et al.  Selective laser melting of metal micropowders with short-pulse laser , 2016, Symposium on Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments (WILGA).

[2]  W. Yeong,et al.  Selective laser melting of stainless steel 316L with low porosity and high build rates , 2016 .

[3]  Bhesh Bhandari,et al.  3d printing technologies applied for food design: Status and prospects , 2016 .

[4]  Abhishek Sharma,et al.  Rapid and Automated Measurement of Milk Adulteration Using a 3D Printed Optofluidic Microviscometer (OMV) , 2016, IEEE Sensors Journal.

[5]  Sangkee Min,et al.  From design for manufacturing (DFM) to manufacturing for design (MFD) via hybrid manufacturing and smart factory: A review and perspective of paradigm shift , 2016 .

[6]  Jonathan Goole,et al.  3D printing in pharmaceutics: A new tool for designing customized drug delivery systems. , 2016, International journal of pharmaceutics.

[7]  Sang Do Noh,et al.  Smart manufacturing: Past research, present findings, and future directions , 2016, International Journal of Precision Engineering and Manufacturing-Green Technology.

[8]  M. Matsumoto,et al.  Trends and research challenges in remanufacturing , 2016 .

[9]  Federico Parietti,et al.  3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs , 2015 .

[10]  Akhil Garg,et al.  Measurement of environmental aspect of 3-D printing process using soft computing methods , 2015 .

[11]  E. O. Olakanmi,et al.  A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties , 2015 .

[12]  Seung Ki Moon,et al.  Design for additive manufacturing in customized products , 2015 .

[13]  Ajay Agarwal,et al.  Computational Analysis of a Microfluidic Viscometer and Its Application in the Rapid and Automated Measurement of Biodiesel Blending Under Pressure Driven Flow , 2015 .

[14]  Hae-yong Cho,et al.  3-dimensional circuit device fabrication process using stereolithography and direct writing , 2015 .

[15]  Jae-Won Choi,et al.  Combined 3D printing technologies and material for fabrication of tactile sensors , 2015 .

[16]  Chee Meng Benjamin Ho,et al.  A review on 3D printed bioimplants , 2015 .

[17]  Benjamin M. Wu,et al.  Recent advances in 3D printing of biomaterials , 2015, Journal of biological engineering.

[18]  Jeremy Faludi,et al.  Comparing Environmental Impacts of Additive Manufacturing vs. Traditional Machining via Life-Cycle Assessment , 2015 .

[19]  A. Basit,et al.  Fused-filament 3D printing (3DP) for fabrication of tablets. , 2014, International journal of pharmaceutics.

[20]  Anton J.M. Schoot Uiterkamp,et al.  A global sustainability perspective on 3D printing technologies , 2014 .

[21]  Seok Jae Lee,et al.  3D printed modules for integrated microfluidic devices , 2014 .

[22]  Bethany C Gross,et al.  3D printed microfluidic devices with integrated versatile and reusable electrodes. , 2014, Lab on a chip.

[23]  Joshua M. Pearce,et al.  Life Cycle Analysis of Distributed Recycling of Post-consumer High Density Polyethylene for 3-D Printing Filament , 2014 .

[24]  Daniel Filippini,et al.  PDMS lab-on-a-chip fabrication using 3D printed templates. , 2014, Lab on a chip.

[25]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[26]  Leroy Cronin,et al.  Combining 3D printing and liquid handling to produce user-friendly reactionware for chemical synthesis and purification , 2013 .

[27]  S. Lockwood,et al.  A 3D printed fluidic device that enables integrated features. , 2013, Analytical chemistry.

[28]  Leroy Cronin,et al.  3D-printed devices for continuous-flow organic chemistry , 2013, Beilstein journal of organic chemistry.

[29]  Leroy Cronin,et al.  Continuous parallel ESI-MS analysis of reactions carried out in a bespoke 3D printed device , 2013, Beilstein journal of nanotechnology.

[30]  Hod Lipson,et al.  Fabricated: The New World of 3D Printing , 2013 .

[31]  Ivan Poupyrev,et al.  Printed optics: 3D printing of embedded optical elements for interactive devices , 2012, UIST.

[32]  Sung-Hyuk Song,et al.  Smart soft composite: An integrated 3D soft morphing structure using bend-twist coupling of anisotropic materials , 2012 .

[33]  Ryan B. Wicker,et al.  Integrating stereolithography and direct print technologies for 3D structural electronics fabrication , 2012 .

[34]  Bastian E. Rapp,et al.  Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes , 2011 .

[35]  A. Spierings,et al.  Comparison of density measurement techniques for additive manufactured metallic parts , 2011 .

[36]  Nicolas Serres,et al.  Environmental comparison of MESO-CLAD® process and conventional machining implementing life cycle assessment , 2011 .

[37]  David L. Bourell,et al.  Sustainability Study in Selective Laser Sintering - An Energy Perspective , 2010 .

[38]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[39]  James A Covington,et al.  Fabrication of versatile channel flow cells for quantitative electroanalysis using prototyping. , 2010, Analytical chemistry.

[40]  Sung-Hoon Ahn,et al.  Direct metal printing of 3D electrical circuit using rapid prototyping , 2009 .

[41]  Sung-Hoon Ahn,et al.  Review of manufacturing processes for soft biomimetic robots , 2009 .

[42]  Andrew J deMello,et al.  Miniaturization: Chemistry at the crossroads. , 2009, Nature chemistry.

[43]  C. Grigoropoulos,et al.  All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles , 2007 .

[44]  Kyung-Hyun Whang,et al.  Rapid Manufacturing of 3D Micro Products by UV Laser Ablation and Phase Change Filling , 2006 .

[45]  S. Milz,et al.  Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing , 2005, Journal of materials science. Materials in medicine.

[46]  H. Seitz,et al.  Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[47]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[48]  David Bak,et al.  Rapid prototyping or rapid production? 3D printing processes move industry towards the latter , 2003 .

[49]  Sanjay Kumar.  Selective laser sintering: A qualitative and objective approach , 2003 .

[50]  Ute Zschieschang,et al.  Flexible Organic Circuits with Printed Gate Electrodes , 2003 .

[51]  J. Lewis,et al.  Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly , 2003, Nature materials.

[52]  L. Froyen,et al.  Lasers and materials in selective laser sintering , 2002 .

[53]  S. Allen,et al.  The design of conformal cooling channels in injection molding tooling , 2001 .

[54]  S. Quake,et al.  Monolithic microfabricated valves and pumps by multilayer soft lithography. , 2000, Science.

[55]  G. Whitesides,et al.  Patterning proteins and cells using soft lithography. , 1999, Biomaterials.

[56]  R. Schasfoort,et al.  Field-effect flow control for microfabricated fluidic networks , 1999, Science.

[57]  Sukhan Lee,et al.  Micromachined inertial sensors , 1999, Proceedings 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human and Environment Friendly Robots with High Intelligence and Emotional Quotients (Cat. No.99CH36289).

[58]  S. Jacobson,et al.  Microfluidic devices for electrokinetically driven parallel and serial mixing , 1999 .

[59]  G. Whitesides,et al.  Rapid prototyping of microfluidic switches in poly(dimethyl siloxane) and their actuation by electro-osmotic flow , 1999 .

[60]  G. Whitesides,et al.  Microfabrication inside capillaries using multiphase laminar flow patterning , 1999, Science.

[61]  K. Y. Lau,et al.  Surface-micromachined microoptical elements and systems , 1998, Proc. IEEE.

[62]  C. Effenhauser,et al.  Integrated capillary electrophoresis on flexible silicone microdevices:  analysis of DNA restriction fragments and detection of single DNA molecules on microchips. , 1997, Analytical chemistry.

[63]  P. Veltink,et al.  The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications , 1997 .

[64]  L. Buchaillot,et al.  Silicon Nitride Thin Films Young's Modulus Determination by an Optical Non Destructive Method , 1997 .

[65]  R C Johnston,et al.  Charnley Total Hip Arthroplasty with Use of Improved Techniques of Cementing. The Results after a Minimum of Fifteen Years of Follow-up* , 1997, The Journal of bone and joint surgery. American volume.

[66]  G. Whitesides,et al.  Complex Optical Surfaces Formed by Replica Molding Against Elastomeric Masters , 1996, Science.

[67]  Detlef Kochan,et al.  Solid Freeform Manufacturing: Advanced Rapid Prototyping , 1993 .

[68]  D. J. Harrison,et al.  Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip , 1993, Science.

[69]  Larry J. Hornbeck,et al.  Deformable-Mirror Spatial Light Modulators , 1990, Optics & Photonics.

[70]  R. Rothman,et al.  Cemented versus cementless total hip arthroplasty. A critical review. , 1990, Clinical orthopaedics and related research.

[71]  R M Pilliar,et al.  The optimum pore size for the fixation of porous-surfaced metal implants by the ingrowth of bone. , 1980, Clinical orthopaedics and related research.

[72]  L.M. Roylance,et al.  A batch-fabricated silicon accelerometer , 1979, IEEE Transactions on Electron Devices.

[73]  H. Amstutz,et al.  "Modes of failure" of cemented stem-type femoral components: a radiographic analysis of loosening. , 1979, Clinical orthopaedics and related research.

[74]  J. Charnley,et al.  Total hip replacement by low-friction arthroplasty. , 1970, Clinical orthopaedics and related research.

[75]  J. Charnley.  2 Total Hip Replacement by Low‐Friction Arthroplasty , 1970 .

[76]  J. Scales.  Arthroplasty of the hip using foreign materials: a history , 1966 .

[77]  P. W. Chapman,et al.  Silicon Diffused-Element Piezoresistive Diaphragms , 1962 .

[78]  Z. Tehrani,et al.  3-D printed composite microfluidic pump for wearable biomedical applications , 2016 .

[79]  Y. Xu,et al.  Three dimensional printing of carbon/carbon composites by selective laser sintering , 2016 .

[80]  A. Basit,et al.  3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets. , 2015, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[81]  Jeroen P.J. de Jong,et al.  Innovation lessons from 3-D printing , 2014, IEEE Engineering Management Review.

[82]  Rob N. Candler,et al.  Characterization of 3D-printed microfluidic chip interconnects with integrated O-rings , 2014 .

[83]  Tarek I. Zohdi,et al.  Multiphysics modeling and simulation of selective laser sintering manufacturing processes , 2014 .

[84]  J.-P. Kruth,et al.  Direct selective laser sintering/melting of high density alumina powder layers at elevated temperatures , 2014 .

[85]  Christopher B. Williams,et al.  Combining Additive Manufacturing and Direct Write for Integrated Electronics – , 2013 .

[86]  Gábor Harsányi,et al.  3D Rapid Prototyping Technology (RPT) as a powerful tool in microfluidic development , 2010 .

[87]  L. Murr,et al.  Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. , 2009, Journal of the mechanical behavior of biomedical materials.

[88]  David W. Rosen,et al.  Design for Additive Manufacturing of Cellular Structures , 2008 .

[89]  R. Pilliar,et al.  Cementless implant fixation--toward improved reliability. , 2005, The Orthopedic clinics of North America.

[90]  I. Chang,et al.  Selective laser sintering of gas atomized M2 high speed steel powder , 2000 .

[91]  R. W. Tkach,et al.  Free-space micromachined optical switches for optical networking , 1999 .

[92]  Ming-Chuan Leu,et al.  Progress in Additive Manufacturing and Rapid Prototyping , 1998 .

[93]  R. Huiskes,et al.  The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials. , 1992, Clinical orthopaedics and related research.

[94]  Wales.  Fast, Precise, Safe Prototypes with FDM , 1991 .

[95]  Jean-Pierre Kruth,et al.  Material incress manufacturing by rapid prototyping techniques , 1991 .

[96]  A M Weinstein,et al.  Interface mechanics of porous titanium implants. , 1981, Journal of biomedical materials research.