Augmenting simulations of airflow around buildings using field measurements

Computational fluid-dynamics (CFD) simulations have become an important tool for the assessment of airflow in urban areas. However, large discrepancies may appear when simulated predictions are compared with field measurements because of the complexity of airflow behaviour around buildings and difficulties in defining correct sets of parameter values, including those for inlet conditions. Inlet conditions of the CFD model are difficult to estimate and often the values employed do not represent real conditions. In this paper, a model-based data-interpretation framework is proposed in order to integrate knowledge obtained through CFD simulations with those obtained from field measurements carried out in the urban canopy layer (UCL). In this framework, probability-based inlet conditions of the CFD simulation are identified with measurements taken in the UCL. The framework is built on the error-domain model falsification approach that has been developed for the identification of other complex systems. System identification of physics-based models is a challenging task because of the presence of errors in models as well as measurements. This paper presents a methodology to estimate modelling errors. Furthermore, error-domain model falsification has been adapted for the application of airflow modelling around buildings in order to accommodate the time variability of atmospheric conditions. As a case study, the framework is tested and validated for the predictions of airflow around an experimental facility of the Future Cities Laboratory, called "BubbleZERO". Results show that the framework is capable of narrowing down parameter-value sets from over five hundred to a few having possible inlet conditions for the selected case-study. Thus the case-study illustrates an approach to identifying time-varying inlet conditions and predicting wind characteristics at locations where there are no sensors.

[1]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[2]  Li Guo,et al.  Numerical Simulation of Airflow and Particle Collection by Vegetative Barriers , 2012 .

[3]  Jörg Franke,et al.  The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: a summary , 2011 .

[4]  Ian P. Castro,et al.  Flow around a cube in a turbulent boundary layer: LES and experiment , 2009 .

[5]  S. Murakami,et al.  Comparison of various revised k–ε models and LES applied to flow around a high-rise building model with 1:1:2 shape placed within the surface boundary layer , 2008 .

[6]  Jan Carmeliet,et al.  Pedestrian wind conditions at outdoor platforms in a high-rise apartment building: generic sub-configuration validation, wind comfort assessment and uncertainty issues , 2008 .

[7]  Bje Bert Blocken,et al.  CFD simulation of cross-ventilation flow for different isolated building configurations: validation with wind tunnel measurements and analysis of physical and numerical diffusion effects , 2012 .

[8]  Yoshihide Tominaga,et al.  Cooperative project for CFD prediction of pedestrian wind environment in the Architectural Institute of Japan , 2007 .

[9]  Jon Wieringa,et al.  Updating the Davenport roughness classification , 1992 .

[10]  Fue-Sang Lien,et al.  A comparison of large Eddy simulations with a standard k–ε Reynolds-averaged Navier–Stokes model for the prediction of a fully developed turbulent flow over a matrix of cubes , 2003 .

[11]  Michael Schatzmann,et al.  Issues with validation of urban flow and dispersion CFD models , 2011 .

[12]  T. Shih,et al.  A new k-ϵ eddy viscosity model for high reynolds number turbulent flows , 1995 .

[13]  Bje Bert Blocken,et al.  Pedestrian wind comfort around a large football stadium in an urban environment: CFD simulation, validation and application of the new Dutch wind nuisance standard , 2009 .

[14]  P. Moin,et al.  A dynamic subgrid‐scale eddy viscosity model , 1990 .

[15]  Yoshihide Tominaga,et al.  AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings , 2008 .

[16]  J. Carmeliet,et al.  Convective heat transfer coefficients for exterior building surfaces: Existing correlations and CFD modelling , 2011 .

[17]  Keith Beven,et al.  Environmental Modelling , 2007 .

[18]  Ian F. C. Smith,et al.  Extended Uniform Distribution Accounting for Uncertainty of Uncertainty , 2011 .

[19]  Ian F. C. Smith,et al.  Hybrid probabilities and error-domain structural identification using ambient vibration monitoring , 2013 .

[20]  Shuzo Murakami,et al.  Environmental design of outdoor climate based on CFD , 2006 .

[21]  Parviz Moin,et al.  Erratum: ‘‘A dynamic subgrid‐scale eddy viscosity model’’ [Phys. Fluids A 3, 1760 (1991)] , 1991 .

[22]  C. Ghiaus,et al.  Natural ventilation in the urban environment : assessment and design , 2005 .

[23]  Theodore Stathopoulos,et al.  Application of computational fluid dynamics in building performance simulation for the outdoor environment: an overview , 2011 .

[24]  Qingyan Chen,et al.  Effect of fluctuating wind direction on cross natural ventilation in buildings from large eddy simulation , 2002 .

[25]  Keith Beven,et al.  A manifesto for the equifinality thesis , 2006 .

[26]  Akashi Mochida,et al.  Prediction of wind environment and thermal comfort at pedestrian level in urban area , 2006 .

[27]  Khaled A. Al-Sallal,et al.  Outdoor airflow analysis and potential for passive cooling in the traditional urban context of Dubai , 2011 .

[28]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[29]  Ian F. C. Smith,et al.  Model falsification diagnosis and sensor placement for leak detection in pressurized pipe networks , 2013, Adv. Eng. Informatics.

[30]  K. Hibi,et al.  Turbulent measurments of the flow field around a high-rise building , 1998 .

[31]  T. Stathopoulos,et al.  CFD simulation of the atmospheric boundary layer: wall function problems , 2007 .

[32]  Jonas Allegrini,et al.  Wind tunnel measurements of buoyant flows in street canyons , 2013 .

[33]  Jörg Franke,et al.  Recommendations of the COST action C14 on the use of CFD in predicting pedestrian wind environment , 2006 .

[34]  Bert Blocken,et al.  Coupled urban wind flow and indoor natural ventilation modelling on a high-resolution grid: A case study for the Amsterdam ArenA stadium , 2010, Environ. Model. Softw..