Microsystems for the Effective Technological Processes

Piezoelectric composite material whose basic element is PZT is developed. It allows controlling the optical parameters of the diffraction grating, which is imprinted in it. In addition, the sensitivity of the designed element is increased using silver nanoparticles, thus surface plasmon resonance effect appears. The developed technological route of the production of complex 3D microstructure, from designing it by the method of computer generated holography till its physical 3D patterning by exploiting the process of electron beam lithography and thermal replication, is presented. The experimental technology for the better quality of complex microstructure replicas based on high frequency excitation in the mechanical hot imprint process was proposed and implemented.

[1]  G. A. Pérez-Herrera,et al.  FABRICATION OF TRANSMISSIVE DIFFRACTIVE OPTICAL ELEMENTS FOR THE MID-INFRARED WITH A LASER WRITING INSTRUMENT , 2007 .

[2]  Sadayuki Ueha,et al.  A new ultrasonic motor using electro-rheological fluid and torsional vibration , 1996 .

[3]  Yuji Sakamoto,et al.  A Fast Computational Method for Computer Generated Fourier Hologram Using Patch Model , 2002 .

[4]  K. Kakimoto,et al.  Fabrication of fibrous BaTiO3-reinforced PVDF composite sheet for transducer application , 2013 .

[5]  Yongjun Lai,et al.  A coupled cantilever-microelectrode biosensor for enhanced pathogen detection , 2013 .

[6]  A. Yule,et al.  On droplet formation from capillary waves on a vibrating surface , 2000, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[7]  Jacques Albert,et al.  High resolution grating-assisted surface plasmon resonance fiber optic aptasensor. , 2013, Methods.

[8]  Stephen Y. Chou,et al.  Nano-compact disks with 400 Gbit/in2 storage density fabricated using nanoimprint lithography and read with proximal probe , 1997 .

[9]  Vinayshankar L. Virupaksha,et al.  Study on squeezing flow during nonisothermal embossing of polymer microstructures , 2005 .

[10]  Y. Hirai,et al.  Defect analysis in thermal nanoimprint lithography , 2003 .

[11]  Mitsuru Kitamura,et al.  Computer simulation of reconstructed image for computer-generated holograms , 2009, OPTO.

[12]  Patrik Hoffmann,et al.  High‐Resolution Nanoimprinting with a Robust and Reusable Polymer Mold , 2007 .

[13]  Rossana E. Madrid,et al.  Nanostructured ZnO films: a study of molecular influence on transport properties by impedance spectroscopy , 2015, 1506.05890.

[14]  Weihui Liu,et al.  Label-free immunosensor based on micromachined bulk acoustic resonator for the detection of trace pesticide residues , 2014 .

[15]  Zafar Hussain Ibupoto,et al.  Comparative study of ZnO nanorods and thin films for chemical and biosensing applications and the development of ZnO nanorods based potentiometric strontium ion sensor , 2013 .

[16]  Sylvia Daunert,et al.  Design and Fabrication of CD-Like Microfluidic Platforms for Diagnostics: Polymer-Based Microfabrication , 2001 .

[17]  Shih-Jung Liu,et al.  Hot embossing precise structure onto plastic plates by ultrasonic vibration , 2005 .

[18]  Pasqualina M. Sarro,et al.  Slender piezoelectric cantilevers of high quality AlN layers sputtered on Ti thin film for MEMS actuators , 2013 .

[19]  Y. Ishii,et al.  Computer-generated hologram fabricated by electron-beam lithography for noise reduction , 2012 .

[20]  Eugen I. Scarlat,et al.  OPTIMIZATION OF THE RECONSTRUCTION PARAMETERS IN COMPUTER GENERATED HOLOGRAMS AND DIGITAL HOLOGRAPHY , 2007 .

[21]  J. Giboz,et al.  Microinjection molding of thermoplastic polymers: a review , 2007 .

[22]  L. Cai,et al.  Interference of four umbrellalike beams by a diffractive beam splitter for fabrication of two-dimensional square and trigonal lattices. , 2003, Optics letters.

[23]  Hitoshi Tamura,et al.  Enhancement of the Lohmann-type computer-generated hologram encoded by direct multilevel search algorithm , 2012 .

[24]  Bahram Javidi,et al.  Methods for Displaying Three-Dimensional Images , 2006, Proceedings of the IEEE.

[25]  Ki Bang Lee,et al.  Principles of Microelectromechanical Systems: Lee/Principles of MEMs , 2011 .

[26]  Matthias Worgull,et al.  Chapter 5 – Hot Embossing , 2010 .

[27]  H. Fairbanks.  Applying ultrasonics to the moulding of plastic powders , 1974 .

[28]  Jian Liu,et al.  Optical color image encryption based on computer generated hologram and chaotic theory , 2013 .

[29]  K. Lee.  Principles of Microelectromechanical Systems , 2011 .

[30]  Ping Sheng,et al.  Chiral microstructures (spirals) fabrication by holographic lithography. , 2005, Optics express.

[31]  Bahram Javidi,et al.  Extended focused image in microscopy by digital Holography. , 2005, Optics express.

[32]  Andreas Tünnermann,et al.  Optimized electron beam writing strategy for fabricating computer-generated holograms based on an effective medium approach. , 2011, Optics express.

[33]  J. Homola,et al.  Surface plasmon resonance (SPR) sensors: approaching their limits? , 2009, Optics express.

[34]  Tao Men,et al.  Modal wavefront sensor employing stratified computer-generated holographic elements , 2013 .

[35]  Leslie Y Yeo,et al.  Surface vibration induced spatial ordering of periodic polymer patterns on a substrate. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[36]  M. Worgull,et al.  Modeling and optimization of the hot embossing process for micro- and nanocomponent fabrication , 2006 .

[37]  R. Crawford,et al.  Ultrasonic moulding of plastic powders , 1981 .

[38]  Peeter Saari,et al.  Temporally multiplexed Fourier holography and pattern recognition of femtosecond-duration images , 1993 .

[39]  P. Hess,et al.  Nonlinear surface acoustic waves: realization of solitary pulses and fracture. , 2008, Ultrasonics.

[40]  Christiane Ziegler,et al.  Cantilever-based biosensors , 2004, Analytical and bioanalytical chemistry.

[41]  Chengkuo Lee,et al.  A MEMS-based piezoelectric cantilever patterned with PZT thin film array for harvesting energy from low frequency vibrations , 2011 .

[42]  An-liang Zhang,et al.  Rapid concentration of particle and bioparticle suspension based on surface acoustic wave , 2009 .

[43]  E. Cuche,et al.  Characterization of microlenses by digital holographic microscopy. , 2006, Applied optics.

[44]  Hannes Bleuler,et al.  Study of polyvinylidene fluoride (PVDF) based bimorph actuators for laser scanning actuation at kHz frequency range , 2012 .

[45]  Andris Ozols,et al.  RECORDING OF HOLOGRAPHIC GRATINGS AND THEIR COHERENT SELF-ENHANCEMENT IN AN a-As 2 S 3 FILM WITH A MINIMUM LIGHT INTENSITY MODULATION , 2012 .

[46]  Liren Liu,et al.  Hiding an image in cascaded Fresnel digital holograms , 2006 .

[47]  Boumediene Benyoucef,et al.  Modeling, Simulation and Optimization of the Mechanical Response of Micromechanical Silicon Cantilever: Application to Piezoresistive Force Sensor , 2014 .

[48]  Tao Men,et al.  Analysis and demonstration of multiplexed phase computer-generated hologram for modal wavefront sensing , 2014 .

[49]  Yuze Sun,et al.  Sensitive optical biosensors for unlabeled targets: a review. , 2008, Analytica chimica acta.

[50]  Timothy G. Gutowski,et al.  Ultrasonic welding of PEEK graphite APC-2 composites , 1989 .

[51]  Per Gren,et al.  Four-pulse interferometric recordings of transient events by pulsed TV holography , 2003 .

[52]  George Barbastathis,et al.  Design and Fabrication of Computer Generated Holograms for Fresnel Domain Lithography , 2009 .

[53]  Chinghua Hung,et al.  Preventing non-uniform shrinkage in open-die hot embossing of PMMA microstructures , 2003 .

[54]  Michael T. Gale,et al.  Replication technology for optical microsystems , 2005 .

[55]  R. Gerchberg.  A practical algorithm for the determination of phase from image and diffraction plane pictures , 1972 .

[56]  Zhou Jin,et al.  Self-focusing matched filter produced by computer-generated hologram , 2000 .

[57]  E. Brigham,et al.  The fast Fourier transform and its applications , 1988 .

[58]  James H. Burge,et al.  Methods for certification of CGH fabrication , 2002 .

[59]  Jun Kondoh,et al.  Development of temperature-control system for liquid droplet using surface Acoustic wave devices , 2009 .

[60]  C Gärtner,et al.  Polymer microfabrication methods for microfluidic analytical applications , 2000, Electrophoresis.

[61]  C. Roques-Carmes,et al.  Quality assessment of polymer replication by hot embossing and micro-injection moulding processes using scanning mechanical microscopy , 2009 .

[62]  Tomoyoshi Ito,et al.  Computer-generated hologram using an approximate Fresnel integral , 2011 .

[63]  Dan Cojoc,et al.  Wave front engineering for microscopy of living cells. , 2005, Optics express.

[64]  William L. Wilson,et al.  High density, high performance optical data storage via volume holography: Viability at last? , 2000 .

[65]  Kent L. Lawrence,et al.  Closed-form stiffness matrices for higher order tetrahedral finite elements , 2012, Adv. Eng. Softw..

[66]  A. F. Fercher,et al.  Computer-generated Holograms for Testing Optical Elements: Error Analysis and Error Compensation , 1976 .

[67]  J. Bausells.  Piezoresistive cantilevers for nanomechanical sensing , 2015 .

[68]  C. J. Nonhof,et al.  Estimates for process conditions during the ultrasonic welding of thermoplastics , 1996 .

[69]  Lingfeng Yu,et al.  Movies of cellular and sub-cellular motion by digital holographic microscopy , 2006, Biomedical engineering online.

[70]  Olivier Français,et al.  Chemical sensing: millimeter size resonant microcantilever performance , 2004 .

[71]  Kehar Singh,et al.  Fully phase encryption using digital holography , 2004 .

[72]  Xiaodi Tan,et al.  Collinear technology for a holographic versatile disk. , 2006, Applied optics.

[73]  Helmut Schift,et al.  Hot embossing in polymers as a direct way to pattern resist , 1998 .

[74]  M. Heckele,et al.  Review on micro molding of thermoplastic polymers , 2004 .

[75]  Predrag Mikulic,et al.  Long period grating based biosensor for the detection of Escherichia coli bacteria. , 2012, Biosensors & bioelectronics.

[76]  T. Poon.  Digital Holography and Three-Dimensional Display , 2006 .

[77]  Johannes Courtial,et al.  Experimental demonstration of holographic three-dimensional light shaping using a Gerchberg–Saxton algorithm , 2005 .

[78]  Robert C. Richardson,et al.  Design and evaluation of linear ultrasonic motors for a cardiac compression assist device , 2005 .

[79]  Andrew J. Waddie,et al.  Design of diffractive optical elements for high-power laser applications , 2004 .

[80]  Jingmin Li,et al.  Effect of hot embossing process parameters on polymer flow and microchannel accuracy produced without vacuum , 2008 .

[81]  Raimondas Petruskevicius,et al.  E-beam lithography of computer generated holograms using a fully vectorial 3D beam propagation method , 2010 .

[82]  Hiroshi Ito,et al.  Polymer structure and properties in micro- and nanomolding process , 2009 .

[83]  Gregory D. Emmerson,et al.  Multi-purpose optical biosensors for real-time detection of bacteria, viruses and toxins , 2010 .

[84]  M. Taghizadeh,et al.  Design and fabrication of Fourier plane diffractive optical elements for high-power fibre-coupling applications , 2005 .

[85]  Hui Li,et al.  Sensing capability of a PZT-driven cantilever actuator , 2006 .

[86]  Yael Nemirovsky,et al.  Composite porous silicon-crystalline silicon cantilevers for enhanced biosensing , 2008 .

[87]  Xia Chang-liang,et al.  Stability analysis of the rotor of ultrasonic motor driving fluid directly. , 2005, Ultrasonics.

[88]  Tomoyoshi Ito,et al.  Parallel computing of a digital hologram and particle searching for microdigital-holographic particle-tracking velocimetry. , 2007, Applied optics.

[89]  F. Gao,et al.  Electron-beam lithography to improve quality of computer-generated hologram , 2002 .

[90]  Jun Liu,et al.  Deformation behavior of solid polymer during hot embossing process , 2010 .

[91]  C. Wilkinson,et al.  Optical heating for short hot embossing cycle times , 2006 .

[93]  G. Spalding,et al.  Computer-generated holographic optical tweezer arrays , 2000, cond-mat/0008414.

[94]  Hiroshi Goto,et al.  Development of ultrasonic micro hot embossing technology , 2007 .

[95]  Norbert F Scherer,et al.  Stochastic scanning multiphoton multifocal microscopy. , 2006, Optics express.

[96]  Yordan Kostov,et al.  Electrical percolation based biosensors. , 2013, Methods.

[97]  Minvydas Ragulskis,et al.  Image communication scheme based on dynamic visual cryptography and computer generated holography , 2015 .

[98]  Miroslav Pohanka,et al.  Biosensors for Biological Warfare Agent Detection , 2007 .