Physical-Virtual Impedance Control in Ultralightweight and Compliant Dual-Arm Aerial Manipulators

Dual-arm aerial manipulation requires the design and development of high performance robotic arms in terms of safety, robustness, and force/torque/impedance control, taking into account the integration in the aerial platform, the strong weight constraints, and the technological limitations of the servo actuators. A compliant joint arm also improves the response of the aerial manipulator to collisions and external forces during the flight operation. This letter evaluates the control capabilities in a lightweight manipulator built with smart servo actuators and a spring-lever transmission mechanism that provides joint compliance and deflection measurement. The dynamic model of a compliant joint is validated through frequency identification, demonstrating how virtual variable impedance can be achieved without a second motor. Mechanical joint compliance is the base of the Cartesian impedance control scheme of the dual-arm system, integrated with the controller of the aerial platform. A stereo vision system provides the Cartesian deflection of the end effector, derived from the definition of an equivalent stiff joint manipulator, allowing the estimation and control of the contact forces. Experimental results validate the developed concepts.

[1]  Alessandro De Luca,et al.  Compliance Control for an Anthropomorphic Robot with Elastic Joints: Theory and Experiments , 2005 .

[2]  Stefano Stramigioli,et al.  Interaction control of an UAV endowed with a manipulator , 2013, 2013 IEEE International Conference on Robotics and Automation.

[3]  Giorgio Grioli,et al.  VSA-II: a novel prototype of variable stiffness actuator for safe and performing robots interacting with humans , 2008, 2008 IEEE International Conference on Robotics and Automation.

[4]  Aníbal Ollero,et al.  Impedance Control of an aerial-manipulator: Preliminary results , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[5]  A. Ollero,et al.  Aerial manipulation robot composed of an autonomous helicopter and a 7 degrees of freedom industrial manipulator , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[6]  Antonio Franchi,et al.  Design, identification and experimental testing of a light-weight flexible-joint arm for aerial physical interaction , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[7]  Aníbal Ollero,et al.  Vision-Based Deflection Estimation in an Anthropomorphic, Compliant and Lightweight Dual Arm , 2017, ROBOT.

[8]  Wan Kyun Chung,et al.  SEA force/torque servo control with model-based robust motion control and link-side motion feedback , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[9]  Jerry Pratt,et al.  Series elastic actuators for high fidelity force control , 2002 .

[10]  Vincenzo Lippiello,et al.  Exploiting redundancy in Cartesian impedance control of UAVs equipped with a robotic arm , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  Aaron M. Dollar,et al.  Stability of Helicopters in Compliant Contact Under PD-PID Control , 2014, IEEE Transactions on Robotics.

[12]  Aníbal Ollero,et al.  Lightweight compliant arm with compliant finger for aerial manipulation and inspection , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[13]  Anibal Ollero,et al.  Design of a lightweight dual arm system for aerial manipulation , 2018 .

[14]  Aníbal Ollero,et al.  Control of an aerial robot with multi-link arm for assembly tasks , 2013, 2013 IEEE International Conference on Robotics and Automation.

[15]  Stefano Stramigioli,et al.  Compliant Aerial Manipulators: Toward a New Generation of Aerial Robotic Workers , 2016, IEEE Robotics and Automation Letters.

[16]  Aníbal Ollero,et al.  Anthropomorphic, compliant and lightweight dual arm system for aerial manipulation , 2017, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[17]  Matko Orsag,et al.  Towards valve turning using a dual-arm aerial manipulator , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[18]  J. Braga,et al.  Aerial manipulator for structure inspection by contact from the underside , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[19]  Vijay Kumar,et al.  Design, modeling, estimation and control for aerial grasping and manipulation , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[20]  Mark W. Spong,et al.  Control of Flexible Joint Robots: A Survey , 1990 .

[21]  Florian Patrick Petit.  Analysis and Control of Variable Stiffness Robots , 2014 .

[22]  S. Stramigioli,et al.  The mVSA-UT: A miniaturized differential mechanism for a continuous rotational variable stiffness actuator , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[23]  G. Heredia,et al.  Mechanical Design of a 6-DOF Aerial Manipulator for assembling bar structures using UAVs , 2014 .

[24]  Francesco Pierri,et al.  Selective compliance control for an unmanned aerial vehicle with a robotic arm , 2014, 22nd Mediterranean Conference on Control and Automation.

[25]  Aníbal Ollero,et al.  Lightweight compliant arm for aerial manipulation , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[26]  Christian Ott,et al.  Cartesian Impedance Control of Redundant and Flexible-Joint Robots , 2008, Springer Tracts in Advanced Robotics.

[27]  Vincenzo Lippiello,et al.  Design, modeling and control of a 5-DoF light-weight robot arm for aerial manipulation , 2015, 2015 23rd Mediterranean Conference on Control and Automation (MED).