Small-Resistance and High-Quality-Factor Magnetic Integrated Inductors on PCB

We have designed and fabricated both single-coil and parallel-coil magnetic integrated inductors with extremely small resistances and high quality factors on an 8-in-round printed circuit board (PCB) substrate for microprocessor power delivery applications. The dc resistances of these inductors are less than 12 mOmega. Soft magnetic material CoFeHfO was successfully integrated into the inductor fabrication to increase the inductance. The quality factors are more than 80 in a frequency range of 1.5-2 GHz for air-core inductors and more than 23 in a range of 200-300 MHz for magnetic inductors. The net inductance improvement of the magnetic inductor over air-core inductor is about 12%, which could be further enhanced with a thicker magnetic core, according to our theoretic calculation and HFSS simulation. We also characterized the permeability spectra of CoFeHfO material on the PCB substrate, simulated the high-frequency performance of the magnetic integrated inductor by HFSS, and, for the first time, reached a good agreement with the experimental data. The experimental and simulation results of the magnetic inductors as compared to those of the air-core inductors point out the future direction to further optimize magnetic integrated inductors.

[1]  R. Hida,et al.  Low-Resistance Integrated Toroidal Inductor for Power Management , 2006, IEEE transactions on magnetics.

[2]  Shan X. Wang,et al.  Soft magnetic granular material Co–Fe–Hf–O for micromagnetic device applications , 2005 .

[3]  J. Rousseau,et al.  Simulation of the contribution of magnetic films on planar inductors characteristics , 2005 .

[4]  P. Ancey,et al.  Low Resistance Integrated Toroidal Inductors for Power Management , 2006, INTERMAG 2006 - IEEE International Magnetics Conference.

[5]  Charles R. Sullivan,et al.  Converter and inductor design for fast-response microprocessor power delivery , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[6]  G. Schrom,et al.  Integrated On-Chip Inductors With Magnetic Films , 2006, IEEE Transactions on Magnetics.

[7]  Masahiro Yamaguchi,et al.  Ferromagnetic RF Integrated Inductor with Closed Magnetic Circuit Structure , 2005, IEEE MTT-S International Microwave Symposium Digest, 2005..

[8]  C. Yue,et al.  On-chip Spiral Inductors With Patterned Ground Shields For Si-based RF IC's , 1997, Symposium 1997 on VLSI Circuits.

[9]  Chong H. Ahn,et al.  2D and 3D simulation of toroidal type thin film inductors , 1998 .

[10]  M. Vroubel,et al.  Integrated tunable magnetic RF inductor , 2004, IEEE Electron Device Letters.

[11]  Sudipto Chakraborty,et al.  Integrated RF architectures in fully-organic SOP technology , 2002 .

[12]  C. Yang,et al.  Fully integrated ferrite-based inductors for RF ICs , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[13]  E. Vandamme,et al.  Improved three-step de-embedding method to accurately account for the influence of pad parasitics in silicon on-wafer RF test-structures , 2001 .

[14]  Dok Won Lee,et al.  High-frequency responses of granular CoFeHfO and amorphous CoZrTa magnetic materials , 2007 .

[15]  Mark G. Allen,et al.  Low temperature fabrication and characterization of integrated packaging-compatible, ferrite-core magnetic devices , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[16]  Shan X. Wang,et al.  Package compatibility and substrate dependence of granular soft magnetic material CoFeHfO developed by reactive sputtering , 2006 .

[17]  Dok Won Lee,et al.  Fabrication and Analysis of High-Performance Integrated Solenoid Inductor With Magnetic Core , 2008, IEEE Transactions on Magnetics.

[18]  Dok Won Lee,et al.  Tensor Nature of Permeability and Its Effects in Inductive Magnetic Devices , 2007, IEEE Transactions on Magnetics.

[19]  J.D. van Wyk,et al.  Low Profile Integratable Inductor Fabricated Based on LTCC Technology for Microprocessor Power Delivery Applications , 2007, IEEE Transactions on Components and Packaging Technologies.

[20]  S. Couderc,et al.  Bidirectional ferromagnetic spiral inductors using single deposition , 2005, IEEE Transactions on Magnetics.

[21]  H. Braunisch,et al.  RF packaging and passives: design, fabrication, measurement, and validation of package embedded inductors , 2005, IEEE Transactions on Advanced Packaging.

[22]  K. Venkatachalam,et al.  Measured electrical performance of V-groove inductors for microprocessor power delivery , 2003, Digest of INTERMAG 2003. International Magnetics Conference (Cat. No.03CH37401).

[23]  William B. Kuhn,et al.  Printed microinductors on flexible substrates for power applications , 2003 .

[25]  Masahiro Yamaguchi,et al.  Soft magnetic materials application in the RF range , 2006 .

[26]  A. Sanchez,et al.  Demagnetizing factors for rectangular prisms , 2005, IEEE Transactions on Magnetics.

[27]  S.C.O. Mathuna,et al.  PCB integrated inductors for low power DC/DC converter , 2003 .

[28]  E. Waffenschmidt,et al.  Integrated Ultra Thin Flexible Inductors for Low Power Converters , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.