Simulation on a Novel Solar High-temperature Thermochemical Coupled Phase-change Reactor

Abstract Solar high-temperature thermochemical process is a promising concept to produce hydrogen as well as basic chemical materials by concentrated solar energy. An important feature of this technology is the design of a satisfactory reactor. A novel solar high-temperature thermochemical coupled phase-change reactor based on a special-shaped high-temperature heat pipe (SHHP) receiver is presented. The SHHP integrated with phase-change heat transfer, temperature leveling of heat pipe and heat plate (flat plate heat pipe) separates the upper reaction chamber and the lower solar absorber. In this manner, radial temperature gradient in absorber and axial temperature gradient in reaction chamber will be lowered, thus to enhance safety and thermochemical conversion efficiency of the solar reactor. A three-dimensional model of the reaction chamber coupling heat transfer with nitrogen as working fluid instead of reactants is developed to optimize geometry configurations. The temperature distribution of the reactor wall and the working gas are presented. The impact of the inlet/outlet configurations and arrangement of heat pipes in heat plate are investigated. The results show that different inlet/outlet positions has significant influence on the thermo-fluid behavior, and the existence of the heat pipes on heat plate enhances the heat transfer in reaction chamber.

[1]  Richard B. Diver,et al.  Solar test of an integrated sodium reflux heat pipe receiver/reactor for thermochemical energy transport , 1992 .

[2]  Douglas R. Adkins,et al.  Solar heat pipe testing of the Stirling Thermal Motors 4-120 Stirling engine , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.

[3]  Robert Palumbo,et al.  Further advances toward the development of a direct heating solar thermal chemical reactor for the thermal dissociation of ZnO(s) , 2006 .

[4]  Alan W. Weimer,et al.  Solarthermal chemical processing challenges and commercial path forward , 2012 .

[5]  Nesrin Ozalp,et al.  CFD analysis on the influence of helical carving in a vortex flow solar reactor , 2010 .

[6]  Gilles Flamant,et al.  A pilot-scale solar reactor for the production of hydrogen and carbon black from methane splitting , 2010 .

[7]  Gilles Flamant,et al.  Co-production of hydrogen and carbon black from solar thermal methane splitting in a tubular reactor prototype , 2011 .

[8]  Abraham Kogan,et al.  Direct solar thermal splitting of water and on-site separation of the products—II. Experimental feasibility study , 1998 .

[9]  Takao Miura,et al.  Rotary-type solar reactor for solar hydrogen production with two-step water splitting process , 2007 .

[10]  Harald Ries,et al.  Inherent limitations of volumetric solar receivers , 1996 .

[11]  Lan Xiao,et al.  Advances in solar hydrogen production via two-step water-splitting thermochemical cycles based on metal redox reactions , 2012 .

[12]  Anke Weidenkaff,et al.  A solar chemical reactor for co-production of zinc and synthesis gas , 1998 .

[13]  R. Pitz-Paal,et al.  Porous Materials as Open Volumetric Solar Receivers: Experimental Determination of Thermophysical and Heat Transfer Properties , 2004 .

[14]  A. Steinfeld,et al.  Syngas Production by Thermochemical Gasification of Carbonaceous Waste Materials in a 150 kWth Packed-Bed Solar Reactor , 2013 .

[15]  W. Chueh,et al.  High-Flux Solar-Driven Thermochemical Dissociation of CO2 and H2O Using Nonstoichiometric Ceria , 2010, Science.

[16]  Antonio L. Avila-Marin,et al.  Volumetric receivers in Solar Thermal Power Plants with Central Receiver System technology: A review , 2011 .

[17]  A. Kribus,et al.  Performance of the Directly-Irradiated Annular Pressurized Receiver (DIAPR) Operating at 20 Bar and 1,200°C , 2001 .

[18]  Robert Palumbo,et al.  A two-cavity reactor for solar chemical processes: heat transfer model and application to carbothermic reduction of ZnO , 2004 .