Computing And Computer Modelling In Geotechnical Engineering

[1]  P. Marcal,et al.  Introduction to the Finite-Element Method , 1973 .

[2]  Chandrakant S. Desai,et al.  Mechanics of Materials and Interfaces: The Disturbed State Concept , 2000 .

[3]  J. Burland.  On the compressibility and shear strength of natural clays , 1990 .

[4]  Zdeněk P. Bažant,et al.  Non-local yield limit degradation , 1988 .

[5]  C. Desai,et al.  Cyclic Interface and Joint Shear Device Including Pore Pressure Effects , 1997 .

[6]  R. Borst.  SIMULATION OF STRAIN LOCALIZATION: A REAPPRAISAL OF THE COSSERAT CONTINUUM , 1991 .

[7]  J. M. Duncan.  State of the Art: Limit Equilibrium and Finite-Element Analysis of Slopes , 1996 .

[8]  Teresa M Adams,et al.  Some Expert System Applications in Geotechnical Engineering , 1989 .

[9]  EH Davis,et al.  The Effect of Increasing Strength with Depth on the Bearing Capacity of Clays , 1973 .

[10]  Arcady Dyskin,et al.  Modelling of flexural toppling failures of rock slopes , 1995 .

[11]  Gernot Beer,et al.  Introduction to Finite and Boundary Element Methods for Engineers , 1993 .

[12]  P Cundall,et al.  A MICROCOMPUTER PROGRAM FOR MODELLING LARGE-STRAIN PLASTICITY PROBLEMS. PROCEEDINGS OF THE SIXTH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN GEOMECHANICS, 11-15 APRIL 1988, INNSBRUCK, AUSTRIA. VOLUMES 1 - 3 , 1988 .

[13]  C. Desai,et al.  Modelling of joints and interfaces using the disturbed-state concept , 1992 .

[14]  T. Belytschko,et al.  A finite element with embedded localization zones , 1988 .

[15]  Antonio Gens,et al.  A constitutive model for partially saturated soils , 1990 .

[16]  Chandrakant S. Desai,et al.  A constitutive model and associated testing for soft rock , 1987 .

[17]  H. J. Greenberg,et al.  EXTENDED LIMIT DESIGN THEOREMS FOR CONTINUOUS MEDIA , 1952 .

[18]  Gonzalo Castro,et al.  Factors Affecting Liquefaction and Cyclic Mobility , 1977 .

[19]  Alexander M. Puzrin,et al.  The influence of pre-failure soil stiffness on the numerical analysis of tunnel construction , 1997 .

[20]  Erich Bauer,et al.  CALIBRATION OF A COMPREHENSIVE HYPOPLASTIC MODEL FOR GRANULAR MATERIALS , 1996 .

[21]  Antonio Capsoni,et al.  A FINITE ELEMENT FORMULATION OF THE RIGID–PLASTIC LIMIT ANALYSIS PROBLEM , 1997 .

[22]  J. Pastor,et al.  Finite element method and limit analysis theory for soil mechanics problems , 1980 .

[23]  O. C. Zienkiewicz,et al.  Elastoplastic soil constitutive laws generalized to partially saturated states , 1996 .

[24]  Inn-Joon Park,et al.  Fundamental yet simplified model for liquefaction instability , 1998 .

[25]  J. M. Duncan,et al.  Nonlinear Analysis of Stress and Strain in Soils , 1970 .

[26]  Arcady Dyskin,et al.  Numerical modelling of the flexural deformation of foliated rock slopes , 1996 .

[27]  A. Biron,et al.  Limit analysis of axisymmetric pressure vessel intersections of arbitrary shape , 1972 .

[28]  E. Anderheggen,et al.  Finite element limit analysis using linear programming , 1972 .

[29]  Laurent Vulliet,et al.  Constitutive modeling and analysis of creeping slopes , 1995 .

[30]  Zdenek P. Bazant,et al.  Nonlocal Damage Theory Based on Micromechanics of Crack Interactions , 1994 .

[31]  Ronaldo I. Borja,et al.  Cam-Clay plasticity, Part II: implicit integration of constitutive equation based a nonlinear elastic stress predictor , 1991 .

[32]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[33]  A straightforward numerical method for evaluating the ultimate loads of structures , 1995 .

[34]  Cemal Basaran,et al.  Numerical algorithms and mesh dependence in the disturbed state concept , 1997 .

[35]  K. L. Fishman,et al.  Plasticity-based constitutive model with associated testing for joints , 1991 .