Combined treatment for conversion of fast-growing poplar wood to magnetic wood with high dimensional stability

[1]  Jianzhang Li,et al.  Optimization of reaction parameters and characterization of glyoxal-treated poplar sapwood , 2015, Wood Science and Technology.

[2]  Jianzhang Li,et al.  Wood/Polymer Nanocomposites Prepared by Impregnation with Furfuryl Alcohol and Nano-SiO2 , 2014 .

[3]  Stacy M. Trey,et al.  Controlled deposition of magnetic particles within the 3-D template of wood: making use of the natural hierarchical structure of wood , 2014 .

[4]  Chia-Chang Lin,et al.  Structural analysis and catalytic activity of Fe3O4 nanoparticles prepared by a facile co-precipitation method in a rotating packed bed , 2014 .

[5]  Hamed Daemi,et al.  Fast removal of malachite green dye using novel superparamagnetic sodium alginate-coated Fe3O4 nanoparticles. , 2014, International journal of biological macromolecules.

[6]  T. Maji,et al.  Strain sensing behavior and dynamic mechanical properties of carbon nanotubes/nanoclay reinforced wood polymer nanocomposite , 2014 .

[7]  A. Pfriem,et al.  Changes in Cell Wall Dimensions during the Different Stages of Furfuryl Alcohol Modification , 2014 .

[8]  I. Burgert,et al.  Hybrid wood materials with magnetic anisotropy dictated by the hierarchical cell structure. , 2014, ACS applied materials & interfaces.

[9]  B. Mohebby,et al.  Oleothermal modification of fir wood with a combination of soybean oil and maleic anhydride and its effects on physico-mechanical properties of treated wood , 2014, Wood Science and Technology.

[10]  A. Pfriem,et al.  Shape Retention of Furfurylated and Moulded Wood Veneer , 2013 .

[11]  N. Ayrilmis,et al.  Fast growing biomass as reinforcing filler in thermoplastic composites: Paulownia elongata wood , 2013 .

[12]  A. Pfriem,et al.  Impregnation of veneer with furfuryl alcohol for an improved plasticization and moulding , 2013, European Journal of Wood and Wood Products.

[13]  W. Grigsby,et al.  Effect of Maleic Anhydride Content and Ethanol Dilution on the Polymerization of Furfuryl Alcohol in Wood Veneer Studied by Differential Scanning Calorimetry , 2013 .

[14]  Xinwei Miao,et al.  Impregnation of poplar wood (Populus euramericana) with methylolurea and sodium silicate sol and induction of in-situ gel polymerization by heating , 2013 .

[15]  H. Deka,et al.  Renewable resource based “all green composites” from kenaf biofiber and poly(furfuryl alcohol) bioresin , 2013 .

[16]  Bodo Caspar Kielmann,et al.  Modification of three hardwoods with an N-methylol melamine compound and a metal-complex dye , 2013, Wood Science and Technology.

[17]  H. Oka,et al.  Electromagnetic Wave Absorption Characteristics Adjustment Method of Recycled Powder-Type Magnetic Wood for Use as a Building Material , 2012, IEEE Transactions on Magnetics.

[18]  A. Wagenführ,et al.  Macroscopic and microscopic monitoring of swelling of beech wood after impregnation with furfuryl alcohol , 2012, European Journal of Wood and Wood Products.

[19]  E. C. Botelho,et al.  Viscosity, pH, and moisture effect in the porosity of poly(furfuryl alcohol) , 2012 .

[20]  H. Guan,et al.  In situ preparation and magnetic properties of Fe3O4/wood composite , 2012 .

[21]  S. Hamdan,et al.  Thermogravimetric analysis and dynamic Young's modulus measurement of N,N‐dimethylacetamide‐impregnated wood polymer composites , 2011 .

[22]  A. Volinsky,et al.  Fe3O4 magnetic nanoparticles synthesis from tailings by ultrasonic chemical co-precipitation , 2011 .

[23]  Honglin Gao,et al.  IN-SITU PREPARATION AND MAGNETIC PROPERTIES OF Fe3O4/WOOD COMPOSITE , 2011 .

[24]  F. Mantia,et al.  Green composites: A brief review , 2011 .

[25]  Jianzhang Li,et al.  Properties of Acetylated Wood Prepared at Low Temperature in the Presence of Catalysts , 2009 .

[26]  R. Tannenbaum,et al.  Biobased Nanocomposites Prepared by In Situ Polymerization of Furfuryl Alcohol with Cellulose Whiskers or Montmorillonite Clay , 2008 .

[27]  A. Zhu,et al.  Fe3O4/poly(N-Isopropylacrylamide)/Chitosan Composite Microspheres with Multiresponsive Properties , 2008 .

[28]  Mats Westin,et al.  Development of Modified Wood Products Based on Furan Chemistry , 2008 .

[29]  T. Osaka,et al.  Synthesis of Fe3O4 nanoparticles with various sizes and magnetic properties by controlled hydrolysis. , 2007, Journal of colloid and interface science.

[30]  Haiping Yang,et al.  Characteristics of hemicellulose, cellulose and lignin pyrolysis , 2007 .

[31]  Shang-Tzen Chang,et al.  Modification of wood with isopropyl glycidyl ether and its effects on decay resistance and light stability. , 2006, Bioresource technology.

[32]  C. C. Wang,et al.  Synthesis of superparamagnetic Fe3O4/SiO2 composite particles via sol-gel process based on inverse miniemulsion , 2005 .

[33]  Roger M. Rowell,et al.  Handbook of wood chemistry and wood composites. , 2005 .

[34]  Mats Westin,et al.  Properties of furfurylated wood , 2004 .

[35]  M. Schneider,et al.  Eco‐efficient wood protection: Furfurylated wood as alternative to traditional wood preservation , 2004 .

[36]  H. Oka,et al.  Manufacturing methods and magnetic characteristics of magnetic wood , 2004 .

[37]  Nobuyuki Hirai,et al.  Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions , 2000, Journal of Wood Science.

[38]  I. D. Cave.  Theory of X-ray measurement of microfibril angle in wood , 1997, Wood Science and Technology.

[39]  I. D. Cave.  Theory of X-ray measurement of microfibril angle in wood , 1997, Wood Science and Technology.

[40]  H. Oka,et al.  Wood construction and magnetic characteristics of impregnated type magnetic wood , 2002 .

[41]  H. Oka,et al.  Composition and heating efficiency of magnetic wood by induction heating , 2000 .

[42]  U. Schwertmann,et al.  The Iron Oxides: Structure, Properties, Reactions, Occurrences and Uses , 2003 .