Glancing angle deposited nanostructured film Fabry-Perot etalons for optical detection of ultrasound.

In this paper a new class of optical Fabry-Perot-based ultrasound detectors using low acoustic impedance glancing angle deposited (GLAD) films is demonstrated. GLAD is a single-step physical vapor-deposition (PVD) technique used to fabricate porous nanostructured thin films. Using titanium dioxide (TiO(2)), a transparent semiconductor with a high refractive index (n = 2.4), the GLAD technique can be employed to fabricate samples with tailored nano-porosity, refractive index periodicities, and high Q-factor reflectance spectra. The average acoustic impedance of the porous films is lower than bulk materials which will improve acoustic coupling, especially for high acoustic frequencies. For this work, two filters with high reflection in the C-band range and high transparency in the visible range (~80%) using GLAD films were fabricated. A 23 µm Parylene C layer was sandwiched between these two GLAD films in order to form a GLAD Fabry Perot Interferometer (GLAD-FPI). A high speed tunable continuous wavelength C-band laser was focused at the FPI and the reflection was measured using a high speed photodiode. The ultrasound pressure modulated the optical thickness of the FPI and hence its reflectivity. The fabricated sensor was tested using a 10 MHz unfocused transducer. The ultrasound transducer was calibrated using a hydrophone. The minimum detectable acoustic pressure was measured as 80 ± 20 Pa and the -3dB bandwidth was measured to be 18 MHz. This ultra-sensitive sensor can be an alternative to piezoelectric ultrasound transducers for any techniques in which ultrasound waves need to be detected including ultrasonic and photoacoustic imaging modalities. We demonstrate our GLAD-FPI for photoacoustic signal detection in optical-resolution photoacoustic microscopy (OR-PAM). To the best of our knowledge, this is the first time that a FPI fabricated using the GLAD method has been used for ultra-sensitive ultrasound detection.

[1]  E. Fred Schubert,et al.  Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection , 2007 .

[2]  M. Brett,et al.  Engineered anisotropic microstructures for ultrathin-layer chromatography. , 2010, Analytical chemistry.

[3]  M. J. Brett,et al.  Sculptured thin films and glancing angle deposition: Growth mechanics and applications , 1997 .

[4]  Michael J. Brett,et al.  Narrow bandpass optical filters fabricated with one-dimensionally periodic inhomogeneous thin films , 2006 .

[5]  Sheng-Wen Huang,et al.  Toward fiber-based high-frequency 3D ultrasound imaging , 2007, SPIE BiOS.

[6]  John,et al.  Strong localization of photons in certain disordered dielectric superlattices. , 1987, Physical review letters.

[7]  Jan Laufer,et al.  Multimodal simultaneous photoacoustic tomography, optical resolution microscopy, and OCT system , 2010, BiOS.

[8]  K. N. Rao,et al.  Influence of deposition parameters on optical properties of TiO2 films , 2002 .

[9]  Jeremy C. Sit,et al.  Liquid Crystal Alignment and Switching in Porous Chiral Thin Films , 2000 .

[10]  Wei Shi,et al.  Optical-resolution photoacoustic micro-endoscopy using image-guide fibers and fiber laser technology , 2011, BiOS.

[11]  Pai-Chi Li,et al.  All-optical scanhead for ultrasound and photoacoustic dual-modality imaging. , 2012, Optics express.

[12]  Michael J. Brett,et al.  Ambient humidity monitoring using a 1D photonic crystal sensor fabricated with glancing angle deposition , 2009, Optics + Optoelectronics.

[13]  R. Zemp,et al.  Label-free in vivo fiber-based optical-resolution photoacoustic microscopy. , 2011, Optics letters.

[14]  K. Narasimha Rao,et al.  Influence of deposition parameters on optical properties of TiO 2 films , 2002 .

[15]  M. M. Hawkeye.  Engineering optical nanomaterials using glancing angle deposition , 2011 .

[16]  M. Wong,et al.  Glancing angle deposited titania films for dye-sensitized solar cells , 2009 .

[17]  Wei Shi,et al.  Real-time handheld optical-resolution photoacoustic microscopy. , 2011, Optics express.

[18]  Michael J. Brett,et al.  Glancing angle deposition: Fabrication, properties, and applications of micro- and nanostructured thin films , 2007 .

[19]  Matthew O'Donnell,et al.  Optoacoustic imaging using thin polymer étalon , 2005 .

[20]  Tao Ling,et al.  Pure optical photoacoustic microscopy , 2011, Optics express.

[21]  Edward Z. Zhang,et al.  3D photoacoustic imaging system for in vivo studies of small animal models , 2008, SPIE BiOS.

[22]  Jeremy C. Sit,et al.  Optical properties of porous helical thin films and the effects of post-deposition annealing , 2004, SPIE Photonics Europe.

[23]  Jan Laufer,et al.  Backward-mode multiwavelength photoacoustic scanner using a planar Fabry-Perot polymer film ultrasound sensor for high-resolution three-dimensional imaging of biological tissues. , 2008, Applied optics.

[24]  Vijayakumar C. Venugopal,et al.  Origin and evolution of sculptured thin films , 2000 .

[25]  M. Brett,et al.  Porous broadband antireflection coating by glancing angle deposition. , 2003, Applied optics.

[26]  Edward Z. Zhang,et al.  A miniature all-optical photoacoustic imaging probe , 2011, BiOS.